Giant LP1000 - Manual
Giant LP1000 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – INSTALLATION INSTRUCTIONS
- Page 4 – Worn parts must be replaced.
- Page 5 – To Check Seals and Plungers; 6 as per plunger
- Page 6 – To Dismantle Gear
- Page 7 – To Reassemble Gear End
- Page 8 – Model LP1000 - Exploded View
- Page 9 – LP1000 TORQUE SPECIFICATIONS; Position
- Page 12 – GIANT INDUSTRIES LIMITED WARRANTY; Manuals provided by Giant Industries, Inc.
Triplex Ceramic
Plunger Pump
Operating Instructions/
Repair and Service
Manual
Contents:
Installation/Repair
Instructions:
pages 2-7
Exploded View:
page 8
Parts List / Kits:
page 9
Torque Specifications:
page 9
Pump Specifications:
page 10
Pump Dimensions:
page 11
Warranty Information:
back page
Model
LP1000
Updated 9/00
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 NOTE: Contact Giant Industries for Service School Information. Phone: (419)-531-4600 INSTALLATION INSTRUCTIONS Installation of the Giant Industries, Inc., pump is not a complicated procedure, but there are some basic steps common to all pumps. The following information is to be considered as a gen...
4 4. Maintenance and Repair To Check Valves: Discharge Valves: Screw out hexagon screws (59) and remove valve casing (54). Pull seal case (46) out of valve casing (54.) Pull valve body (50) and seal case (46) apart. Using pliers, pull spring guide (55) out of the valve casing. Remove discharge valve...
5 To Check Seals and Plungers Unscrew hexagon screw (59) and take off valve casing (54.) Remove the screw-in joints (37B) and take off the elbow pipes (37A). Remove drip-return ring (44) from seal sleeve (36). Then pull seal sleeve (36) out of the crankcase. Take the seal tension spring (41) out of ...
