Giant GP7124A - Manual
Giant GP7124A – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – INSTALLATION INSTRUCTIONS
- Page 3 – Specifications; Positive inlet pressures are recommended!; GP7124A HORSEPOWER REQUIRMENTS
- Page 6 – GP7124A REPAIR INSTRUCTIONS; TO CHECK VALVES; Replace worn parts grease seals with Silicone before installing.
- Page 7 – MOUNTING VALVE CASING; and sealing surfaces of valve casing.; TO DISASSEMBLE GEAR; far into the crosshead guide as possible.; Position; GP7124A TORQUE SPECIFICATIONS
- Page 8 – GIANT INDUSTRIES LIMITED WARRANTY
Contents:
Installation Instructions:
page 2
Pump Specifications:
page 3
Parts List/Exploded View: pages 4-5
Repair & Service:
pages 6-7
Torque Specifications:
page 7
Dimensions:
back page
Warranty Information:
back page
Triplex Ceramic
Plunger Pump
Operating Instructions/
Repair and Service
Manual
Model
GP7124A
Updated 5/98
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 INSTALLATION INSTRUCTIONS Installation of the Giant Industries, Inc., pump is not a complicated procedure, but there are some basic steps common to all pumps. The following information is to be considered as a general outline for installation. If you have unique requirements, please contact Giant ...
1400 = hp 3 Volume ........................................................................................................ Up to 12.7 GPM Discharge Pressure .................................................................................... Up to 10000 PSI 1 Speed ....................................
6 GP7124A REPAIR INSTRUCTIONS NOTE: Always take time to lubricate all metal and non-metal parts with a light film of oil before reassembling. This step will help ensure proper fit, at the same time protecting the pump non-metal parts (elastomers) from cutting and scoring. TO CHECK VALVES Lossen scre...
