Gefen GTV-HDMI1.3-CAT6 - Manual

Page 3 - Technical Support; Fax; Technical Support Hours:; any accompanying doc u men ta tion without prior written notice.; ASKING FOR ASSISTANCE

Rev X1 Technical Support : Telephone (818) 772-9100 (800) 545-6900 Fax (818) 772-9120 Technical Support Hours: 8:00 AM to 5:00 PM Monday thru Friday. Write To: Gefen Inc.c/o Customer Service20600 Nordhoff St Chatsworth, CA 91311 [email protected] Notice Gefen Inc. reserves the right...

Page 4 - CONTENTS

CONTENTS 1 Introduction 2 Operation Notes 3 Features 4 Sender Unit Panel Layout 5 Sender Unit Panel Descriptions 6 Receiver Unit Panel Layout 7 Receiver Unit Panel Descriptions 8 Connecting And Operating The 8 Extender For HDMI 1.3 Over CAT-6 9 Network Cable Wiring Diagram 10 Specifi cations 11 Warr...

Page 5 - Note: The GefenTV HDMI 1.3 CAT6 Extender is HDCP compliant.; INTRODUCTION

1 Congratulations on your purchase of the Extender for HDMI 1.3 Over CAT-6. Your complete satisfaction is very important to us. Gefen TV Gefen TV is a unique product line catering to the growing needs for innovative home theater solutions. We specialize in total integration for your home theater, wh...

Page 6 - • HDCP; OPERATION NOTES

READ THESE NOTES BEFORE INSTALLING OR OPERATING THE EXTENDER FOR HDMI 1.3 OVER CAT-6 • The distance at which the Extender for HDMI 1.3 Over CAT-6 will carry a signal will vary depending on the source’s resolution and features. - 20m (66 feet) -- HDMI 1.3 w/Deep Color/1080p, Dolby TrueHD or DTS-HD lo...

Page 7 - FEATURES

3 Features • Flexible extension of high-bandwidth HDMI 1.3 thanks to the performance and reliability of CAT-6a cable. • Audio and video are transmitted digitally over the CAT-6a cable for zero signal loss. • Single Link Range: 1080p/60, 12 bit color depth, 1920x1200. • Compliant with HDMI 1.3, HDCP ...

Page 8 - SENDER UNIT PANEL LAYOUT

4 Front Panel Back Panel 3 4 5 2 1 SENDER UNIT PANEL LAYOUT

Page 9 - SENDER UNIT PANEL DESCRIPTIONS

5 1 HDMI Input Port Connect the HDMI source to this input port. 2 Power Indicator LED This LED indicator will become active once the included 5V DC power adapter has bee properly connected between the sender unit and an open wall power socket. 3 5V DC Power Input Port Connect the included 5V DC powe...

Page 10 - RECEIVER UNIT PANEL LAYOUT

6 Front Panel Back Panel 1 4 5 2 3 RECEIVER UNIT PANEL LAYOUT

Page 11 - RECEIVER UNIT PANEL DESCRIPTIONS

7 1 5V DC Power Input Port Connect the included 5V DC power supply to this input port. 2 Power Indicator LED This LED indicator will become active once the included 5V DC power adapter has bee properly connected between the sender unit and an open wall power socket. 3 HDMI Output Port Connect the HD...

Page 12 - How to Connect the Extender for HDMI 1.3 Over CAT-6; sender unit using the supplied HDMI cable.; How to Operate the Extender for HDMI 1.3 Over CAT-6; CONNECTING AND OPERATING THE

8 How to Connect the Extender for HDMI 1.3 Over CAT-6 1. Connect the HDMI source device to the Extender for HDMI 1.3 Over CAT-6 sender unit using the supplied HDMI cable. 2. Connect one pair of CAT-6a* cables between the VIDEO and DDC ports on the sender and receiver. *NOTE: This product was designe...

Page 13 - Orange; NETWORK CABLE WIRING DIAGRAM

1 2 3 4 5 6 7 8 Gefen has specifi cally engineered their products to work with the TIA/EIA-568-B specifi cation. Please adhere to the table below when fi eld terminating cable for use with Gefen products. Failure to do so may produce unexpected results and reduced performance. CAT-5, CAT-5e, and CAT...

Page 14 - SPECIFICATIONS

10 Video Amplifi er Bandwidth ....................................................................... 225 MHz Video Output ............... 1080p/60, 12 bit color depth, 2k and 1920x1200 max. res Input DDC Signal ................... 5 Volts p-p (TTL); Input Video Signal: 1.2 Volts p-p HDMI Connector ...

Gefen GTV-HDMI1.3-CAT6 - Manual

Table of Contents:

Summary

Other Gefen Models