Gefen EXT-HDMI-5BNC - Manuals

Page 2 - Technical Support; Fax; Technical Support Hours:; any accompanying doc u men ta tion without prior written notice.; HDMI Over RGB; is a trademark of Gefen Inc.; ASKING FOR ASSISTANCE

Technical Support : Telephone (818) 772-9100 (800) 545-6900 Fax (818) 772-9120 Technical Support Hours: 8:00 AM to 5:00 PM Monday thru Friday. Write To: Gefen Inc.c/o Customer Service20600 Nordhoff St Chatsworth, CA 91311 [email protected] Notice Gefen Inc. reserves the right to make ch...

Page 3 - CONTENTS

CONTENTS 1 Introduction 2 Operation Notes 3 Features 4 Sender Panel Layout 5 Sender Panel Descriptions 6 Receiver Panel Layout 7 Receiver Panel Descriptions 8 Connecting And Operating The HDMI Over RGB 9 Specifi cations 10 Warranty

Page 4 - Note: This HDMI product supports BOTH Audio and Video signals.; INTRODUCTION

1 Congratulations on your purchase of the HDMI Over RGB. Your complete satisfaction is very important to us. Gefen Gefen delivers innovative, progressive computer and electronics add-on solutions that harness integration, extension, distribution and conversion technologies. Gefen’s reliable, plug-an...

Page 5 - The HDMI Over RGB is designed for either 4 or 5 BNC cable type setups.; OPERATION NOTES

READ THESE NOTES BEFORE INSTALLING OR OPERATING THE HDMI OVER RGB The HDMI Over RGB is designed for either 4 or 5 BNC cable type setups. • When 5 BNC cables are present and used, a power supply on the HDMI Over RGB Receiver will not need to be used. Power will be transmitted over the cables. When a ...

Page 6 - FEATURES

3 Features Connects HDMI sources to remote HDMI displays over legacy RGBHV • cabling Supports extension distances of up to 330 feet • Supports resolutions up to 1080p, 2K, and 1920 x 1200 • HDMI and HDCP compliant • Extends any IR device • HDMI 1.3 Features Lip-Sync Pass Through • 340 MHz (up to 16 ...

Page 7 - SENDER PANEL LAYOUT

4 Front Panel Back Panel 1 2 3 4 5 6 7 8 9 SENDER PANEL LAYOUT

Page 8 - Connect the included 5V DC power supply to this input port.; SENDER PANEL DESCRIPTIONS

5 Locking 5V DC Power Supply Input 1 Connect the included 5V DC power supply to this input port. HDMI Input Port 2 Connect the HDMI source device to this input port. A secure connection to this HDMI port can be made using Gefen Mono • LOK cables. IR Out Port 3 An IR emitter/blaster (sold separately,...

Page 9 - RECEIVER PANEL LAYOUT

6 Front Panel Back Panel 1 2 3 4 5 6 7 8 9 10 RECEIVER PANEL LAYOUT

Page 10 - RECEIVER PANEL DESCRIPTIONS

7 Locking 5V DC Power Supply Input 1 When using a 5 BNC cable system this connector will not need to be used. When using a 4 BNC cable system a second 5V DC power supply (part# EXT-PS52AU) must be purchased and connected to this input port. IR Receiver 2 This receiver is used for the IR Repeater fea...

Page 11 - CONNECTING AND OPERATING THE HDMI OVER RGB

8 How to Connect the HDMI Over RGB Connect the HDMI source device to the HDMI Over RGB sender unit using 1. the supplied HDMI cable. The HDMI Over RGB sender and receiver can be used with either a user 2. supplied 4 or 5 BNC cable system. 5 BNC Cables Connect all 5 BNC cables to the R, G, B, C, and ...

Page 12 - Video Ampli; SPECIFICATIONS

9 Video Ampli fi er Bandwidth ....................................................................... 340 MHz DisplayPort v1.0 compatible ............................................................................. Yes Video Resolutions (max) .................................................... 2K,...