Gefen EXT-USB-400FON - Manual

Page 2 - ASKING FOR ASSISTANCE

Technical Support : Telephone (818) 772-9100 (800) 545-6900 Fax (818) 772-9120 Technical Support Hours: 8:00 AM to 5:00 PM PST Monday thru Friday, Paci fi c Time Write To: Gefen, LLCc/o Customer Service20600 Nordhoff St Chatsworth, CA 91311 [email protected] Notice Gefen, LLC reserves t...

Page 3 - CONTENTS

CONTENTS 1 Introduction 2 Operation Notes 3 Features 4 Sender Unit Panel Layout 5 Sender Unit Panel Descriptions 6 Receiver Unit Panel Layout 7 Receiver Unit Panel Descriptions 8 Connecting And Operating The USB 400 FO Extender 8 Wiring Diagram 9 Troubleshooting The USB 400FO Extender 14 Speci fi ca...

Page 4 - INTRODUCTION; Gefen; ber. The receiver end is; How It Works; ber optic cables are used to link the; Applications

1 INTRODUCTION Congratulations on your purchase of the USB 400 FO. Your complete satisfaction is very important to us. Gefen Gefen delivers innovative, progressive computer and electronics add-on solutions that harness integration, extension, distribution and conversion technologies. Gefen’s reliabl...

Page 5 - FCC Radio Frequency Interference Statement Warning; OPERATION NOTES

READ THESE NOTES BEFORE INSTALLING OR OPERATING THE USB 400 FO This equipment provides outstanding extension facilities for any device or USB application that requires a peripheral connection over a distance, such as a USB camera or USB hard drive, keyboard, and mouse. The USB 400 FO works like a US...

Page 6 - FEATURES; Features

3 FEATURES Features • “Extreme USB” technology is used to extend the range of USB 2.0 devices up to 1640 feet (500 meters) using 50/125 μ m fi ber-optic cables • Receiver unit is also a USB 2.0 four-port hub • Provides support for both low-speed and high-speed USB devices • Fully backward-compliant ...

Page 7 - SENDER UNIT PANEL LAYOUT; Front Panel

4 SENDER UNIT PANEL LAYOUT Front Panel Back Panel 1 2 3 4 6 5 7

Page 8 - SENDER UNIT PANEL DESCRIPTIONS; LED turns bright blue when power is supplied.

5 SENDER UNIT PANEL DESCRIPTIONS 1 Power Indicator LED turns bright blue when power is supplied. 2 Link Indicator This LED turns bright green when a valid ExtremeUSB® link is established between the Sender Unit and Receiver Unit. 3 Host Indicator This LED turns bright green when the USB 400 FO syste...

Page 9 - RECEIVER UNIT PANEL LAYOUT

6 RECEIVER UNIT PANEL LAYOUT Front Panel Back Panel 3 4 5 6 8 7 1 2

Page 10 - RECEIVER UNIT PANEL DESCRIPTIONS; USB device input ports.

7 RECEIVER UNIT PANEL DESCRIPTIONS 1 USB Port (1-4) USB device input ports. 2 USB Indicator (1-4) This LED indicates when a USB device is connected to the Device Port. Solid green when device is plugged in and active. Off when device is in a suspend mode or Receiver unit is powered off. Orange when ...

Page 11 - CONNECTING AND OPERATING THE USB-400FON EXTENDER; Connecting the USB 400 FO Extender; ber cables between the Sender Unit and the Receiver; Wiring Diagram for the USB 400 FO Extender; FIBER OPTIC LC-LC CABLE

8 CONNECTING AND OPERATING THE USB-400FON EXTENDER Connecting the USB 400 FO Extender 1. Connect the included USB cable between USB port on the host computer and the Sender Unit. 2. Connect two (2) LC- fi ber cables between the Sender Unit and the Receiver Unit. 3. Connect the USB devices to the Rec...

Page 12 - TROUBLESHOOTING; Verifying Installation on PC or Macintosh Computers

9 TROUBLESHOOTING Verifying Installation on PC or Macintosh Computers 1. For Windows users (2000, XP, Vista, Windows 7), open the Device Manager to con fi rm that the USB 400 FO has installed correctly. Expand the entry for Universal Serial Bus controllers by clicking the + sign. If the USB 400 FO h...

Page 13 - TROUBLESHOOTING THE USB 400 FO EXTENDER; PROBLEM; ber optic

10 TROUBLESHOOTING THE USB 400 FO EXTENDER PROBLEM CAUSE SOLUTION Link LEDs on Sender unit and Receiver unit are off. There is no connection between the Sender unit and Receiver unit. 1. Ensure that a multimode fi ber optic cable with crossover is connected between the Sender and Receiver units. 2. ...

Page 14 - rst device may not

11 TROUBLESHOOTING THE USB 400 FO EXTENDER PROBLEM CAUSE SOLUTION USB 400 FO units were working, but the Host LED on Sender/Receiver units are suddenly blinking The Receiver unit is in suspend mode. The operating system may put the USB 400 FO in suspend mode when computer is put into Suspend/Standby...

Page 15 - cation

12 TROUBLESHOOTING THE USB 400 FO EXTENDER PROBLEM CAUSE SOLUTION USB device is attached to Receiver USB port but Receiver device LED is off A USB device must have the appropriate driver installed on the computer operating system 1. Install the required USB device driver on the computer operating sy...

Page 16 - SPECIFICATIONS; ber optic cable

13 SPECIFICATIONS USB Maximum Transfer Rate....................................................................480Mbps USB Connector (Sender).........................................................................(1) Type B USB Connector (Receiver) .....................................................

Page 17 - under the Support section of the Gefen Web site.

WARRANTY Gefen warrants the equipment it manufactures to be free from defects in material and workmanship. If equipment fails because of such defects and Gefen is noti fi ed within two (2) years from the date of shipment, Gefen will, at its option, repair or replace the equipment, provided that the ...

Page 19 - Pb

*ma-USB-400FON* Rev A6 Pb 20600 Nordhoff St., Chatsworth CA 91311 1-800-545-6900 818-772-9100 fax: 818-772-9120 www.gefen.com [email protected] This product uses UL listed power supplies.

Gefen EXT-USB-400FON - Manual

Table of Contents:

Summary

Other Gefen Models