Gefen EXT-HD-CP-FM10 - Manual

Page 3 - ASKING FOR ASSISTANCE

ASKING FOR ASSISTANCE Rev A1 Technical Support : Telephone (818) 772-9100 (800) 545-6900 Fax (818) 772-9120 Technical Support Hours: 8:00 AM to 5:00 PM Monday through Friday, Paci fi c Time Write To: Gefen LLCc/o Customer Service20600 Nordhoff St Chatsworth, CA 91311 [email protected] N...

Page 4 - CONTENTS

CONTENTS 1 Introduction 2 Operation Notes 3 Features 4 Cable Layout 5 Cable Descriptions 6 Connecting the HD Extender 1FO 6 Wiring Diagram 7 Operating the HD Extender 1FO 8 Speci fi cations 9 Warranty

Page 5 - INTRODUCTION

1 Congratulations on your purchase of the Gefen HD Extender 1FO.Your complete satisfaction is very important to us. Gefen Gefen delivers innovative, progressive computer and electronics add-on solutions that harness integration, extension, distribution and conversion technologies.Gefen’s reliable, p...

Page 6 - OPERATION NOTES; PLEASE READ THESE NOTES BEFORE INSTALLING OR

2 OPERATION NOTES PLEASE READ THESE NOTES BEFORE INSTALLING OR OPERATING THE HD EXTENDER 1FO • In most situations, the Sender pigtail module does not need to be externallypowered unless the source does not supply enough power through theHDMI connector. If the Sender requires a separate power supply ...

Page 7 - FEATURES; Features

3 FEATURES Features • Extends HDMI up to 1000 feet (300 meters) using a single-strand 50/125 μ m multimode (OM2) SC-terminated fi ber optic cable • Supports resolutions up 1080p Full HD • Supports HD lossless audio: LCPM 7.1 audio, Dolby® Digital Plus, Dolby® TrueHD, and DTS-HD® Master Audio™ • Fibe...

Page 8 - CABLE LAYOUT

Page 9 - fl; CABLE DESCRIPTIONS

5 1 Power Indicator (Sender module) This LED will glow bright green when the Hi-Def source is supplying suf fi cient power to the Sender module. If the LED fl ashes green, then the source is unable to power the Sender module. See page 7 for more information. 2 Fiber Optic Connector (Sender module) C...

Page 10 - CONNECTING THE HD EXTENDER 1FO; HDMI

6 How to Connect the HD Extender 1FO 1. Connect the Sender pigtail module to the Hi-Def source. 2. Connect the Receiver pigtail module to the HDTV display. 3. Connect a single strand of SC-terminated fi ber optic cable between the fi ber optic connectors on the Sender and Receiver pigtail modules. 4...

Page 11 - OPERATING THE HD EXTENDER 1FO; Power Indicators; Normal operation; No power / insuffi cient power on the Sender module; Sender module

7 OPERATING THE HD EXTENDER 1FO Power Indicators The power indicators on both the Sender and Receiver modules of the HD Extender 1FO provide information about the current power state. Normal operation If the power indicator on both the Sender and Receiver module glows brightgreen, then both the Send...

Page 12 - SPECIFICATIONS

Maximum Pixel Clock............................................................................... 225 MHz Video Input Connector (Sender)............................. (1) HDMI Type-A, 19-pin, male Video Output Connector (Receiver)....................... (1) HDMI Type-A, 19-pin, male Link Connector (...

Page 13 - under the Support section of the Gefen Web site.

WARRANTY 9 Gefen warrants the equipment it manufactures to be free from defects in material and workmanship. If equipment fails because of such defects and Gefen is noti fi ed within two (2) years from the date of shipment, Gefen will, at its option, repair or replace theequipment, provided that the...

Page 16 - Pb

Rev A1 Pb This product uses UL or CE listed power supplies.