Gefen EXT-DVI-841DL - Manual

Page 2 - ASKING FOR ASSISTANCE; Technical Support; Fax; Technical Support Hours:; any accompanying doc u men ta tion without prior written notice.

ASKING FOR ASSISTANCE Rev X1 Technical Support : Telephone (818) 772-9100 (800) 545-6900 Fax (818) 772-9120 Technical Support Hours: 8:00 AM to 5:00 PM Monday thru Friday. Write To: Gefen Inc.c/o Customer Service20600 Nordhoff St Chatsworth, CA 91311 [email protected] Notice Gefen Inc. ...

Page 3 - CONTENTS

CONTENTS Introduction 1 Operation Notes 2 Features / Package Includes 3 Panel Descriptions 4 Panel Descriptions, Continued 5 Connecting and Operating the 8x1 DVI DL/SL Switcher 6 RMT-8IR Remote Description 7 RMT-8IR Remote Installation 8 IR Remote Control and 8x1 Switcher Confi guration 9 RS-232 Ser...

Page 4 - INTRODUCTION; Gefen

1 INTRODUCTION Congratulations on your purchase of the 8x1 DVI DL/SL Switcher. Your complete satisfaction is very important to us. Gefen Gefen delivers innovative, progressive computer and electronics add-on solutions that harness integration, extension, distribution and conversion technologies. Gef...

Page 5 - OPERATION NOTES; READ THESE NOTES BEFORE INSTALLING OR

OPERATION NOTES 2 READ THESE NOTES BEFORE INSTALLING OR OPERATING THE GEFEN 8X1 DVI DL/SL SWITCHER The 8x1 DVI DL/SL Switcher will take any of up to eight (8) DVI dual-link or • single-link resolution inputs and switch them, one at a time, to a DVI output device such as a display/monitor or projecto...

Page 6 - FEATURES; Features

3 FEATURES Features Switches easily between any eight DVI-SL or DVI-DL sources • Maintains highest resolution dual link DVI • Supports resolutions up through 3840x2400 • Extends the range of DVI video up to 50 feet • Discrete IR remote control included • Serial RS-232 remote port for switching via a...

Page 7 - PANEL LAYOUT; Back Panel

4 PANEL LAYOUT Back Panel Front Panel 3 5 6 7 8 9 4 4 2 1

Page 8 - PANEL DESCRIPTIONS; Provided for external control of the 8x1 DVI DL/SL Switcher.

5 PANEL DESCRIPTIONS External IR Port 1 For connection of external IR extension device such as the Gefen IR Extender (part # EXT-RMT-EXTIR). IR Receiver 2 Receives IR signal from the handheld Infrared remote control unit included with the product. DVI Signal Status LEDs 1-8 3 Provide visual confi rm...

Page 9 - CONNECTING AND OPERATING THE 8X1 DVI DL/SL; How to Connect the 8x1 DVI DL/SL Switcher to your devices:; Connect the included 5V power supply, then plug it into the wall.; How to Operate the 8x1 DVI DL/SL Switcher:; Turn on the DVI display or projector fi rst, then the video sources.

6 CONNECTING AND OPERATING THE 8X1 DVI DL/SL How to Connect the 8x1 DVI DL/SL Switcher to your devices: Connect the supplied DVI cables from the DVI sources into the 8x1 DVI 1. Switcher’s Inputs. Connect the cable from your display (monitor or projector) into the DVI Out 2. of the 8x1 DVI DL/SL Swit...

Page 10 - X1 DVI DL/SL REMOTE DESCRIPTION; LED Indicator

7 8X1 DVI DL/SL REMOTE DESCRIPTION LED Indicator Input SelectionButtons The RMT-8IR remote control will allow the user to select which of 8 DVI sources will be displayed. Please use the information below when selecting the desired source for output to a display or other DVI video receiving device. R...

Page 11 - X1 DVI DL/SL REMOTE INSTALLATION; IR Code Dip Switches

8 8X1 DVI DL/SL REMOTE INSTALLATION To use the RMT-8IR remote, remove the battery cover on the back of the remote to reveal the battery compartment. Insert the included battery into the open battery slot. The positive (+) side should be facing up. Ensure that both DIP (Dual Inline Package) switches ...

Page 12 - RMT-8IR REMOTE AND 8X1 SWITCHER CONFIGURATION; How to Resolve IR Code Confl icts; Picture of the opened rear battery

9 RMT-8IR REMOTE AND 8X1 SWITCHER CONFIGURATION How to Resolve IR Code Confl icts In the event that IR commands from other remote controls confl ict with the supplied RMT-8IR remote control, changing the remote channel will alleviate this issue. The RMT-8IR remote control and the 8x1 DVI DL/SL Switc...

Page 13 - RS-232 SERIAL CONTROL INTERFACE; Binary Table

10 RS-232 SERIAL CONTROL INTERFACE RS232 Settings Bits per second ................................................................................................. 19200 Data bits .................................................................................................................... 8 P...

Page 14 - RACK MOUNT INSTALLATION

11 RACK MOUNT INSTALLATION Rear of unit Front of unit Rack mount ears are provided for installation of this unit into a 1U rack mount space. Locate the side screws on the unit. 1. Remove the front 2 screws that are located closest to the front of the unit. 2. Using the removed screws, screw the rack...

Page 15 - SPECIFICATIONS

12 SPECIFICATIONS Video Amplifi er Bandwidth:..................................................................165 MHz x 2 Input Video Signal:...............................................................................1.2 Volts p-p Input DDC Signal:...................................................

Gefen EXT-DVI-841DL - Manual

Table of Contents:

Summary

Other Gefen Models