Gefen DVI 1600HD - Manual - manualsarea.com

Page 2 - Technical Support; Technical Support Hours:; ASKING FOR ASSISTANCE

Technical Support : Telephone (818) 772-9100 (800) 545-6900 Fax (818) 772-9120 Technical Support Hours: 8:00 AM to 5:00 PM Monday thru Friday. Write To: Gefen Inc.c/o Customer Service20600 Nordhoff St Chatsworth, CA 91311 [email protected] Notice Gefen Inc. reserves the right to make ch...

Page 3 - CONTENTS

CONTENTS 1 Introduction 2 Operation Notes 3 Features 4 Sender Unit Panel Layout 5 Sender Unit Panel Descriptions 7 Receiver Unit Panel Layout 8 Receiver Unit Panel Descriptions 10 Connecting The DVI 1600HD Extender 11 Connecting And Operating The DVI 1600HD Extender 12 Specifi cations 13 Warranty

Page 4 - INTRODUCTION

1 Congratulations on your purchase of the DVI 1600HD Extender. Your complete satisfaction is very important to us. Gefen Gefen delivers innovative, progressive computer and electronics add-on solutions that harness integration, extension, distribution and conversion technologies. Gefen’s reliable, p...

Page 5 - OPERATION NOTES

READ THESE NOTES BEFORE INSTALLING OR OPERATING THE DVI 1600HD EXTENDER DVI 1600HD Extender uses 4 strands of LC terminated fi ber optic cable. • Single-mode and multi-mode fi ber optic cable types are both supported. • DVI and HDMI modes (for HDCP) are available and are selectable via a • switch lo...

Page 6 - FEATURES

3 Features Pure signal integrity and best image over long distances • Fiber-optic transmission medium eliminates electromagnetic interference • (EMI) during send or receive operations Lightweight, rugged cabling and connectors • Cost effective per foot/meter • Low power consumption at 72W total • Pl...

Page 7 - SENDER UNIT PANEL LAYOUT

4 Front Panel Back Panel 1 2 3 4 5 6 7 8 9 10 11 12 17 18 13 14 15 16 SENDER UNIT PANEL LAYOUT

Page 8 - SENDER UNIT PANEL DESCRIPTIONS

5 DVI/HDMI Mode Selector Switch 1 This switch will set the video mode. DVI mode is intended for use with computers and will support resolutions of up to 1920 x 1200. HDMI mode is for use with consumer HDMI devices and supports HDCP and resolutions of up to 1080p Full HD. There are also distance limi...

Page 10 - RECEIVER UNIT PANEL LAYOUT

7 Front Panel Back Panel 1 2 3 4 5 6 7 12 13 8 9 10 11 RECEIVER UNIT PANEL LAYOUT

Page 11 - RECEIVER UNIT PANEL DESCRIPTIONS

8 Reset Button 1 This button is used to cycle the power off and on. In most cases this will force the source to re-establish a link with the endpoint device. This will also force the source to re-read the EDID. Optic B LED Indicator 2 This LED will indicate the status of the connection between the s...

Page 13 - How to Connect the DVI 1600HD Extender; CONNECTING THE DVI 1600HD EXTENDER

10 How to Connect the DVI 1600HD Extender Connect the DVI or HDMI (using a HDMI to DVI adapter/cable) to the DVI 1. 1600HD Extender sending unit using a user supplied cable. NOTE: If the source device is a HDMI device that requires HDCP, please set the DVI/HDMI mode selector switch to HDMI. The unit...

Page 14 - CONNECTING AND OPERATING THE DVI 1600HD EXTENDER

11 CONNECTING AND OPERATING THE DVI 1600HD EXTENDER How to Connect the DVI 1600HD Extender Connect the included 12V DC power supplies to both the sending and 8. receiving units and open wall power sockets. Power on the endpoint device fi rst and then the source device. 9. Operating the DVI 1600HD Ex...

Page 15 - SPECIFICATIONS

12 Video Amplifi er Bandwidth ....................................................................... 165 MHz Maximum Resolution ................................................................. 1920x1200/1080p Input Connector (analog audio) ...................................... 1 x Pair RCA L+R st...

Gefen DVI 1600HD - Manual

Table of Contents:

Summary

Other Gefen Models