GE ZDP48L6RHSS6 - Manual

GE ZDP48L6RHSS6 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

Loading the manual

Dimensions and Clearances (in inches)

For answers to your Monogram,

GE Proﬁle

™

appliance questions, visit our website at

GEAppliances.com or call GE Answer Center

service, 800.626.2000.

Listed by

Underwriters

Laboratories

Professional ranges offer a number of choices in size and cooktop

conﬁgurations.
All Professional Ranges are factory set for natural or liquid propane

gas. The correct model should be ordered for the installation situation.

48" Natural Gas Model

ZDP48N6RHSS–6 gas burners and grill

48" Liquid Propane Gas Model

ZDP48L6RHSS–6 gas burners and grill

Note:

Conversion kits (WB49X10132, Natural to LP and WB49X10133,

LP to Natural) are available if the wrong gas type was ordered. High

Altitude kit, WB49X10130 (for Natural and LP gas models), is also

available. The kits must be installed by a qualified service technician

at additional cost.

Installation Information

Before installing, consult installation instructions packed with product

or online at Monogram.com for current dimensional data.
A 48" or 54" wide professional vent hood with a minimum 1200 CFM

is recommended for installation over this range.

Clearances between range and side wall or combustible material

must be at least 12" on each side.

Advance Planning

Refer to dimensional drawings for appropriate placement and

necessary clearances when planning the installation.
• Cabinetry cannot be installed directly above the range.
• Working areas adjacent to the range should have 18" minimum

clearance between countertop and cabinet bottom.

• Clearance between range and side wall or combustible material

must be at least 12" on each side.

If the range is installed in an island

• Allow 12" minimum clearance at the back to combustible materials.
• Allow 36" minimum above the cooking surface to combustible

materials.

• The vent hood blower should provide at least 1200 CFM.
• Installation must conform with local codes. In the absence of local

codes, the range must comply with the National Fuel Gas Code,

ANSI Z223.1-1990.

22"

12"

1-1/2"

35-1/4"

36-3/4"

28-1/4"

47-7/8"

Optional Backsplash

Speciﬁcation Revised 10 / 05

130552

ZDP48N6RHSS

(Natural Gas)

ZDP48L6RHSS

(Liquid Propane)

– GE Monogram 48" Dual Fuel Professional Range

with 6 Burners and Grill

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.