GE Single Door Refrigerator - Manual

GE Single Door Refrigerator

GE Single Door Refrigerator – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1

2

3

4

Table of Contents:

Page 2 – TRANSFER CENTER HINGE BRACKET; Installation Instructions; REMOVE CENTER HINGE
Page 3 – INSTALL CENTER HINGE PIN
Page 4 – REHANG FREEZER DOOR; REHANG REFRIGERATOR DOOR

Loading the manual

TOOLS YOU WILL NEED

Thin-blade Screwdriver

Installation

Reversing the

Instructions

Door Swing

(Single Door Refrigerator Models only)

Questions? Call 800.GE.CARES (800.432.2737) or Visit our Website at: ge.com

In Canada, call 1.800.561.3344 or Visit our Website at: www.geappliances.ca

1

200D9512P002 31-46127

01-08 JR

IMPORTANT NOTES

When reversing the door swing:

NOTE:

Door swing is not reversible on stainless steel

models.

•

Read the instructions all the way through before
starting.

•

Parts are included in the door hinge kit .

•

Handle parts carefully to avoid scratching paint.

•

Set screws down by their related parts to avoid
using them in the wrong places.

•

Provide a non-scratching work surface for the doors.

IMPORTANT:

Once you begin, do not move the cabinet

until door-swing reversal is completed.

These instructions are for changing the hinges from the
right side to the left side—if you ever want to change
the hinges back to the right side, follow these same
instructions and reverse all references to left and right.

•

Once door swing is finalized, ensure the logo badge is
properly aligned and permanently secured to the door
by removing the adhesive cover on the back side.

NOTE:

A replacement logo badge is included

in the hinge kit .

Unplug the refrigerator from its electrical outlet .

Empty all door shelves, including the dairy
compartment .

Masking Tape

Adjustable Wrench

5/16

″

Socket

Ratchet/Driver

Phillips Screwdriver

Torx T-20 Driver

REMOVE THE REFRIGERATOR DOOR

Tape the door shut with masking tape.

Remove the hinge cover on top of the
refrigerator door by carefully prying it
up with a putty knife, if necessary.
Using a 5/16

″

socket ratchet/driver, remove

the bolts securing the top hinge to the cabinet .
Then lift the hinge straight up to free the hinge
pin from the socket in the top of the door.
Carefully remove the door thimble from inside
the socket . This will be used again when
reinstalling the door on the other side.

1

A

B

C

D

Hinge Cover

Top Hinge

Door Thimble

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Was this manual helpful?

About this manual

Brand: GE
Model: Single Door Refrigerator
Document type: Manual
Language(s): English
Pages: 4
Format: PDF

Summary

Page 2 - TRANSFER CENTER HINGE BRACKET; Installation Instructions; REMOVE CENTER HINGE

TRANSFER CENTER HINGE BRACKET Using a 5/16 ″ socket ratchet/driver, remove the bolts securing the center hinge to the cabinet . Transfer the plug button and screw hole cover inthe hinge holes on the left side to the right side. Install the new center hinge bracket from thekit on the left side. 3 A B...

Page 3 - INSTALL CENTER HINGE PIN

INSTALL CENTER HINGE PIN (For models without freezer door) Install the hinge pin into the new hinge bracket . 4 Installation Instructions REMOVE BOTTOM HINGE ANDLEVELING LEG (For models with freezer door) Using a 1/2 ″ socket ratchet/driver, remove the nut and hinge pin from the hinge bracket with l...

Page 4 - REHANG FREEZER DOOR; REHANG REFRIGERATOR DOOR

REHANG REFRIGERATOR DOOR (cont .) Insert the door thimble into the hinge hole on top of the refrigerator door and then insert the top hinge pin. Make sure the door is aligned with the cabinet . Attach the hinge to the top of the cabinet loosely with the bolts.Make sure the gasket on the door is flus...

Ask a question