GE P2S930YP1FS - Installation Manual

IN THE COMMONWEALTH

OF MASSACHUSETTS

■ This product must be installed by a licensed

plumber or gas fitter.

■ When using ball type gas shut-off valves,

they shall be the T-handle type.

■ A flexible gas connector, when used, must

not exceed 5 feet.

WARNING

FIRE OR EXPLOSION

HAZARD

If the information in this manual is not followed

exactly, a fire or explosion may result causing

property damage, personal injury or death.
Installation must be performed by a qualified

installer.
Read these instructions completely and carefully.
Installation of this range must conform with

local codes, or in the absence of local codes,

with the National Fuel Gas Code, ANSI Z223.1/

NFPA.54, latest edition. In Canada, installation

must conform with the current Natural Gas

Installation Code, CAN/CGA-B149.1 or the

current Propane Installation Code, CAN/CGA-

B149.2, and with local codes where applicable.

This range has been design-certified by

CSA International according to ANSI Z21.1,

latest edition and Canadian Gas Association

according to CAN/CGA-1.1 latest edition.
When installing a gas appliance the use of

old flexible connectors can cause gas leaks

and personal injury. Always use a

NEW

flexible connector.
Leak testing of the appliance shall be conducted

according to the manufacturer instructions.
The range must be electrically grounded in

accordance with local codes or, in the absence

of local codes, in accordance with the National

Electrical Code (ANSI/NFPA 70, latest edition).

In Canada, electrical grounding must be

in accordance with the current CSA C22.1

Canadian Electrical Code Part 1 and/or local

codes. See Electrical Connections in this section.
Do not install this product with an air curtain

hood or other range hood that operates by

blowing air down on the cooktop. This airflow

may interfere with operation of the gas burners

resulting in fire or explosion hazard.

FOR YOUR SAFETY:

WARNING

Before beginning

the installation, switch power off at

service panel and lock the service

disconnecting means to prevent power

from being switched on accidentally.

When the service disconnecting

means cannot be locked, securely

fasten a prominent warning device,

such as a tag, to the service panel.

If you did not receive an anti-tip bracket with your

purchase, call 1.800.626.8774 to receive one at

no cost. (In Canada, call 1.800.561.3344.) For

installation instructions of the bracket,

visit:

GEAppliances.com

.

(In Canada,

GEAppliances.ca

.)

Anti-Tip Bracket

Kit Included

• A child or adult can tip the range and be killed.
• Install the anti-tip bracket to the wall or floor.
• Engage the range to the anti-tip bracket by sliding the

range back such that the foot is engaged.
• Re-engage the anti-tip bracket if the range is moved.
• Failure to do so can result in death or serious burns

to children or adults.

Tip-Over Hazard

WARNING

Installation Instructions

Range

Questions? Call GE Appliances at 1.800.GE.CARES (1.800.432.2737) or visit

GEAppliances.com. In Canada, call 1.800.561.3344 or visit GEAppliances.ca.