Page 2 - Contents
2 GE Energy Gas Turbines Contents Introduction GE5 GE10 MS5001 MS5002C-D MS5002E MS6001B/MS7001EA/MS9001E PGT16 PGT25 PGT25+ LM6000 Main Components Axial Compressor First Stage Nozzles Buckets and Wheels Gas Turbine Operability LNG Exploration and Production, Floating Production Units Pipeline Refin...
Page 4 - Gas Turbines; COMPRESSOR
4 GE Energy Gas Turbines GE5 Gas Turbines COMPRESSOR The GE5 compressor benefits from several decades ofcompressor design evolution focused on achievinghigher efficiency. The new compressor is scaled fromthe similar GE10 unit . It is a high performance, axial flowdesign derived from GE Aircraft Engi...
Page 5 - COMBUSTOR
5 GE Energy Gas Turbines GE5-1 Gas Turbine and has been designed exploiting the experience thecompany has gained over the past 20 years with thePGT25, PGT10, PGT16 and more recently with thePGT25+ (High Speed Power Turbine). The design speed ofthe GE5-2 low pressure turbine is 12,500 rpm, with acapa...
Page 6 - PACKAGE
6 GE Energy Gas Turbines GE5 Gas Turbines PACKAGE The gas turbine packages were designed with anemphasis on standardization, and optimization offactory and field assembly operations. The result is astandard package capable of satisfying the needs of atypical user for low installation and maintenance...
Page 7 - MAINTENANCE PHILOSOPHY
7 GE Energy Gas Turbines MAINTENANCE PHILOSOPHY A fundamental philosophy of the new GE5 gas turbineis simplicity of design, layout and procedures. Thisaffords the GE5 a position of market leadership in costand availability through innovative programs forservice and sparing, and through package assem...
Page 13 - Available for Oil & Gas App lications; FEATURES; APPLICATIONS
MS6001B The MS6001 is a single-shaft, heavy-duty gas turbine. Thehigh efficiency axial compressor has 17 stages. Thecombustor has ten combustion chambers with individualfuel nozzles. The machine has a three-stage impulse turbinewith air-cooled buckets and stationary nozzles on the firsttwo stages to...
Page 14 - GENERAL SPECIFICATIONS; Aeroderivative Gas Turbines
14 GE Energy Gas Turbines The PGT16 gas turbine consists of the twin spool GE Aeroderivative LM1600 Gas Generator coupledwith a rugged, industrial power turbine designed by GE Energy’s Oil & Gas businesses. The LM1600Gas Generator is derived from the F404 turbofan aircraft engine.The power turbi...
Page 18 - Axial Compressor; Main Components
18 GE Energy Gas Turbines Axial Compressor The compressor rotor is made of separately forged wheels (all models except the GE5 and part ofthe GE10 which have a solid forged rotor). Each individual wheel undergoes inspection and is X-rayed for material flaws. In addition, each wheel is balanced indiv...
Page 19 - First Stage Nozzle; Buckets and Wheels
19 GE Energy Gas Turbines First Stage Nozzle The complete first stage nozzle assembly consists of airfoil-shaped vanes which are containedbetween an inner and an outer sidewall. The design of the nozzle assembly and the arrangementfor its support within the turbine shell accommodate the effects of t...
Page 20 - Large Operability Window; Gas Turbine Operability
20 GE Energy Gas Turbines Large Operability Window GE Energy offers a variety of innovative design solutions to maximize the operability window ofthe Oil & Gas gas turbine fleet . In addition to variable stator vanes and blow-off valves, the designsolutions include: - variable turbine nozzle gui...
Page 21 - CPC Logic
21 GE Energy Gas Turbines CPC Logic One of the enhancements recently introduced by GE Energy is the Corrected Parameter Controllogic (CPC). This type of control philosophy applies principally to mechanical drive units, andconsists of an exhaust temperature control curve that self adjusts according t...
Page 22 - LNG Exploration and Production, Floating Production Units
22 GE Energy Gas Turbines Gas, Water Injection & Gas Storage Units Gas compression is a critical operation in the Oil & Gas production chain. Therefore reliability is akey factor in the design of GE Energy natural gas compressors.GE Energy has delivered over 200 compressor trains for gas rei...
Page 23 - Pipeline Standard Units/Packages; Pipeline
23 GE Energy Gas Turbines Pipeline Standard Units/Packages The gas turbines manufactured by GE Energy have features that make them particularlysuitable for pipeline compressor applications; GE Energy’s pipeline centrifugal compressor linecomplements its gas turbine line to optimize matching with the...
Page 24 - Downstream Plants; Refinery and Petrochemicals
24 GE Energy Gas Turbines Downstream Plants Gas turbine-driven centrifugal compressors are also used in Downstream process industries suchas refineries and petrochemical and fertilizer plants that need flexible and reliable compressiontrains.GE Energy turbocompressors are individually tailored to me...
Page 25 - Test Facilities
NATURAL GAS 2 1 FLORENCE PLANT Indoor stands for gas turbine tests to test beds 1-4 L U B E O I LC O N S O L E D L U B E O I LC O N S O L E C V A C U U M S Y S T E M L U B E O I LC O N S O L E B L U B E O I LC O N S O L E A C O N T R O L R O O M A D I E S E L T A N K Shop electric generator + gear b...
Page 26 - Service
26 GE Energy Gas Turbines Service GE Energy provides a complete set of services to support the entire gas turbine product line. Weoffer an extensive portfolio of proactive and interactive service products such as condition-basedmaintenance and long term service agreements complementing the tradition...
Page 27 - Training; CENTER OF EXCELLENCE FOR TRAINING; COVERED EQUIPMENT
GE Energy offers Training for the Operation and Maintenance of our complete line of machineryand equipment . This Training can be provided either at the client’s site or at the Learning Center located at GEEnergy headquarters in Florence, Italy. Instructors are field-seasoned experts who combine the...
Page 28 - Generator Drive
Generator Drive (ISO conditions - natural gas - electrical generator terminals) ISO RATED HEAT RATE EFFIC. PRESSURE EXHAUST TURBINE EXHAUST POWER RATIO FLOW SPEED TEMPERATURE kW kJ/kWh % kg/sec Ibs/sec RPM °C °F PGT5 5,220 13,422 26.8 9.1 24.6 54.2 10,290 523 973 GE5 5,500 11,740 30.7 14.8 19.6 43.1...
Page 29 - Mechanical Drive
29 GE Energy Gas Turbines Mechanical Drive (ISO conditions - natural gas - shaft output) ISO RATED HEAT RATE EFFIC. PRESSURE EXHAUST TURBINE EXHAUST POWER RATIO FLOW SPEED TEMPERATURE kW shp kJ/kWh btu/shp-h % kg/sec Ibs/sec RPM °C °F PGT5 5,440 7,295 13,470 9,523 26.7 8.6 25.8 56.9 10,290 533 991 G...
Page 31 - GE imagination at work
GE imagination at work Nuovo Pignone S.p. A.via F . Matteucci, 2 50127 Florence - ItalyT +39 055 423211F +39 055 4232800www.geoilandgas.com COMK/MARK 769/II - Designed by: Studio Tre FasiPrinted by: Sagraf - 7 -2005 ©200 5 Nuovo Pignone S.p. A. all rights reserved
