GE Drawer Freezer Refrigerator Manual

Page 2 - Read these instructions completely and carefully.; IMPORTANT; Note to Installer; CONTENTS; Planning Information

Safety Information w CAUTION: Due to the weight and size of this refrigerator, and toreduce the risk of personal injury or damage to theproduct – TWO PEOPLE ARE REQUIRED FOR PROPERINSTALLATION. w PRUDENCE : À cause du poids et de la taille de ce réfrigérateur etpour réduire le risque de blessure et ...

Page 3 - PRODUCT DIMENSIONS AND CLEARANCES; Air Circulation Clearances:; THE INSTALLATION SPACE; Water And Electrical Locations

Planning Information 3 PRODUCT DIMENSIONS AND CLEARANCES These Monogram free-standing refrigerators require thefollowing clearances for proper air circulation, plumbingand electrical connections. Air Circulation Clearances: • 1/8" on each side• 1/2" at the back side Installation in a corner:...

Page 4 - Installation Instructions; TOOLS REQUIRED; FLOORING; IMPORTANT NOTE; GROUNDING THE REFRIGERATOR

Installation Instructions 4 TOOLS REQUIRED • Adjustable wrench• 3/8" and 5/15" socket ratchet/driver• Phillips head screwdriver• 3/32", 1/8", 1/4" Allen wrenches• 1/8" Drill bit and electric or hand drill• Tape measure• Pencil• Wire cutters• 1/4" Nut driver• Level MATERIA...

Page 5 - WARNING; Injury to persons can result .; STEP 2 LOCATE ANTI-TIP BRACKET; Figure 1 – Installation Overview; STEP 1 MEASURE CABINET OPENING

WARNING Under certain circumstances, this refrigerator can tip forward. Injury to persons can result . Install Anti-Tip Bracket packed with this refrigerator. Installation Instructions 5 STEP 2 LOCATE ANTI-TIP BRACKET A. Place the anti-tip floor bracket locator template (included inside the anti-tip...

Page 6 - STEP 2C POSITION THE; WOOD Wall and Floor Construction:; Figure 3 – Attachment to; CONCRETE Wall and Floor Construction:; STEP 2A LOCATE ANTI-TIP FLOOR; Figure 2 – Acceptable Screw

Installation Instructions STEP 2C POSITION THE REFRIGERATOR TO ENGAGE THE ANTI-TIP FLOOR AND BASE BRACKETS A. Before pushing the refrigerator into the opening, plug the power cord into the receptacle and connect waterline (if equipped). Check for leaks. B. Locate the refrigerator ’s RH side and move...

Page 7 - STEP 3 INSTALL THE REFRIGERATOR

Installation Instructions 7 NOTE: To prevent damage, leave insidepackaging, door spacer and outside protective wrap in place until the unit is moved to the installation location. STEP 3 INSTALL THE REFRIGERATOR BEFORE MOVING REFRIGERATORINDOORS IMPORTANT: Doors and passageways into the installation ...

Page 8 - BOTTOM DRAWER

Installation Instructions BOTTOM DRAWER REMOVE THE UPPER BASKETA. Open the bottom freezer drawer until it stops. B. Pull the basket out to the stop location. C. Lift the basket up at the front to release it from the slides. D. Lift the back up and out of the slide. REMOVE THE LOWER BASKETA. Open the...

Page 9 - REPLACE THE FREEZER BASKET; Drive the bottom outside screw into the door; Pull out the rail assemblies to the full length

STEP 6 REMOVE THE TOEKICK If, after removing the freezer drawers and refrigerator door, the refrigerator will still not fit through a doorway, the toekick can be removed. • Remove the toekick by removing the 2 Phillips head screws. STEP 7 MOVE THE REFRIGERATOR • Place a piece of the carton or soft c...

Page 10 - STEP 8 REPLACE THE FREEZER

Installation Instructions BOTTOM DRAWER STEP 8 REPLACE THE FREEZER DRAWERS (CONT.) ATTACH AND SECURE THE DRAWER FRONT TO THE SLIDES A. Pull out the rail assemblies to the full length on each side of the cabinet . B. Drive the top screw into the door on each side until it is 1/2 way in. C. Hang the d...

Page 11 - STEP 9 REPLACE FRESH FOOD DOORS; STEP 10 INSTALL WATER LINE; Refrigerator Tubing kits. Do not

Installation Instructions A. Lower the refrigerator door onto the center hinge pin. Ensure that the plastic hinge pin thimble is onthe center hinge pin or inside door hinge pin holelocated in the bottom of the door. STEP 9 REPLACE FRESH FOOD DOORS Hinge Pin B. Securely tape the door shut with maskin...

Page 12 - STEP 10A WATER LINE; Skip this step when not using RO System.; STEP 11 CONNECT WATER SUPPLY; If you are using copper tubing:; STEP 12 CONNECT POWER; STEP 13 MOVE REFRIGERATOR

Installation Instructions 12 STEP 10A WATER LINE INSTALLATION WITH A REVERSE OSMOSISSYSTEM Skip this step when not using RO System. If the water supply to the refrigerator is from a ReverseOsmosis Water System, use the refrigerator ’s filterbypass plug. You must also use the filter bypass plug when ...

Page 13 - STEP 14 LEVEL THE REFRIGERATOR; Adjust the Rollers; Rollers have three purposes:; Adjust the Leveling Legs; The leveling legs have two purposes:; STEP 15 LEVEL THE DOORS

13 STEP 14 LEVEL THE REFRIGERATOR Adjust the Rollers The refrigerator can be leveled by adjusting the rollers,front and rear. Rollers have three purposes: • The rollers adjust so that the door closes easily when opened about halfway. (Raise the front about 5/8" [16 mm] from the floor.) • Rollers...

Page 15 - Notes

Page 16 - GE Consumer & Industrial

NOTE: While performing installations described in this book, safety glasses or goggles should be worn. For Monogram ® local service in your area, call 1.800.444.1845. NOTE: Product improvement is a continuing endeavor at General Electric. Therefore, materials, appearance andspecifications are subjec...