GE BFLH85L - User Manual

GE BFLH85L

GE BFLH85L – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
Page: / 8

Table of Contents:

  • Page 2 – SECTION 1; Preparing the Unit; SECTION 2; New Construction; Figure 1; Figure 2; Screws; Figure 3
  • Page 3 – SECTION 3; Existing Construction; SECTION 4; Ducting; SECTION 5; Wiring; Figure 4; Joist; Figure 5
  • Page 4 – SECTION 6; Completing the Installation; Figure 9
  • Page 5 – Troubleshooting Guide; SECTION 7; Use and Care
  • Page 6 – WARRANTY; Read your User’s Guide.
  • Page 7 – REPLACEMENT PARTS DIAGRAM
Loading the manual

a

BFLH70L, BFLH85L

e

Heater/Exhaust Fan/Light

User’s Guide

210572111 Rev. B 5-06

Item Stock Number(s): BFLH70L, BFLH85L

READ AND SAVE THESE INSTRUCTIONS

READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THE PRODUCT DESCRIBED.

PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION. FAILURE TO COMPLY WITH

INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE!

RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.

GENERAL SAFETY INFORMATION

When using electrical appliances, basic precautions should always be followed to reduce

the risk of fire, electric shock and injury to person, including the following:

1. Read all instructions before installing or using

exhaust fan.

2. Use this unit only in the manner intended by the

manufacturer. If you have questions, contact the
manufacturer.

3. Before servicing or cleaning the unit, switch power

off at service panel and lock the service disconnecting
means to prevent power from being switched on

SAVE THESE INSTRUCTIONS

IMPORTANT INSTRUCTIONS -

OPERATING MANUAL

accidentally. When the service disconnecting means
cannot be locked, securely fasten a prominent warning
device, such as a tag, to the service panel.

4. Installation work and electrical wiring must be done

by qualified person(s) in accordance with all applicable
codes and standards, including fire-related construction.

5. Sufficient air is needed for proper combustion and

exhausting of gases through the flue (chimney) of

1 of 8

www.geelectrical.com

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Was this manual helpful?

About this manual

Brand
GE
Model
BFLH85L
Document type
User Manual
Language(s)
English
Pages
8
File size
169 KB
Format
PDF

Summary

Page 2 - SECTION 1; Preparing the Unit; SECTION 2; New Construction; Figure 1; Figure 2; Screws; Figure 3

210572111 Rev. B 5-06 GENERAL SAFETY INFORMATION (Continued) fuel burning equipment to prevent back drafting. Followthe heating equipment manufacturer’s guideline andsafety standards such as those published by the NationalFire Protection Association (NFPA) and the AmericanSociety for Heating, Refrig...

Page 3 - SECTION 3; Existing Construction; SECTION 4; Ducting; SECTION 5; Wiring; Figure 4; Joist; Figure 5

210572111 Rev. B 5-06 ceiling. Secure the ends of the rails with screws ornails (not included) to the joists and slide housinginto final position (Figure 4) . 1a. Mounting Tab Installation: Line up housing so that it will be flush with the finished ceiling. Position thefan so that the tabs rest flat...

Page 4 - SECTION 6; Completing the Installation; Figure 9

210572111 Rev. B 5-06 1. Run wiring from approved wall switches carrying the appropriate rating. One neutral (white), oneground (green or bare copper), and three hot (black,red, blue leads connected to the switch, one foreach function). Secure the electrical wires to thehousing with an approved elec...

Ask a question

Up to 3 photos. Max 5 MB each. Formats: JPG, JPEG, PNG, WebP.