Page 3 - Declarations; OCUMENT; Copyright
DX40 Serial Device Router Installation Guide i Declarations D OCUMENT N OTICE Copyright Copyright 2007 by GarrettCom. Printed in the US. All rights reserved. This manual may not be reproduced or disclosed in whole or in part by any means without the written consent of GarrettCom. DynaStar is a trade...
Page 4 - Revision History; ARRANTY
Warranty DX40 Serial Device Router Installation Guide ii Revision History W ARRANTY GarrettCom warrants equipment manufactured by it to be free from defects in materials and workmanship for a period of one (1) year from date of shipment. If within the warranty period the purchaser discovers such ite...
Page 5 - ATENTS
Patents DX40 Serial Device Router Installation Guide iii P ATENTS As to equipment proposed and furnished by GarrettCom, GarrettCom shall defend any suit or proceeding brought against purchaser so far as based on a claim that said equipment constitutes an infringement of any patent of the United Stat...
Page 6 - AFETY
Safety DX40 Serial Device Router Installation Guide iv IC CS03 (Industry Canada) This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the interference-causing equipment entitled “Digital Apparatus”, ICES-003 of the department of Commun...
Page 7 - Service Personnel Warning; ONTACTING
Contacting GarrettCom Utility Networks DX40 Serial Device Router Installation Guide v Service Personnel Warning The DX40 may be AC or DC powered. Remove all power connections at the circuit panel before removing the unit. The installation of this product must comply with all applicable codes and pra...
Page 9 - vii; ABLE; Preface; HAPTER
DX40 Serial Device Router Installation Guide vii T ABLE O F C ONTENTS Preface About This Manual ............................................................................................................................ ixConventions ....................................................................
Page 10 - viii
C ONTENTS DX40 Serial Device Router Installation Guide viii 2.3.3 Connecting Network Cables ............................................................................................... 18 2.3.3.1 Connecting Serial Cables ...............................................................................
Page 12 - EB
- DX40 Serial Device Router Installation Guide x W EB A CCESS All of the DX40 manuals are also available in .pdf format on the GarrettCom Utility Networks website, www.garrettcomun.com . Y OUR C OMMENTS If you find an error or have a helpful tip on the layout or informational content of this or any ...
Page 13 - Chapter 1; Overview; Connectivity
DX40 Serial Device Router Installation Guide 1 Chapter 1 Overview 1.1 Overview The Magnum DX40 provides connectivity to asynchronous and Ethernet traffic through two programmable serial ports and two Ethernet ports for Fiber optic and (optionally) copper line connections. 1.2 Configuration The follo...
Page 14 - Power and Ground; Indicators
C HAPTER 1 - Overview Configuration DX40 Serial Device Router Installation Guide 2 1.2.2 Power and Ground The DX40 can be ordered with a high (90 -250 VAC or VDC) or low (24-48 VDC) voltage power supply. The connection point for the power supply is located at the top of the chassis. The top surface ...
Page 15 - Mounting Options
C HAPTER 1 - Overview Configuration DX40 Serial Device Router Installation Guide 3 Figure 1-3. Side View 1.2.4 Mounting Options There are two mounting options for the DX40: • Panel mount (see Section 2.3.1.1 ) • DIN rail mount (see Section 2.3.1.2 ) Each of these options requires specific accessory ...
Page 16 - Specifications; Physical; Environmental; Optical
C HAPTER 1 - Overview Specifications DX40 Serial Device Router Installation Guide 4 1.3 Specifications The following sections provide detailed information about the physical, electronic, and industrial specifications of the DX40. 1.3.1 Physical The physical dimensions and weight of the DX40 are defi...
Page 17 - Compliance; Power Requirements
C HAPTER 1 - Overview Specifications DX40 Serial Device Router Installation Guide 5 1.3.4 Compliance The industry compliance profile of the DX40 is defined in table Table 1-4 . 1.3.5 Power Requirements The power requirements of the DX40 are defined in Table 1-5 . Table 1-4. Compliance With Standards...
Page 18 - Ports and External Connectors
C HAPTER 1 - Overview Specifications DX40 Serial Device Router Installation Guide 6 1.3.6 Ports and External Connectors The ports and external connectors of the DX40 are defined in Table 1-6 . 1.3.7 Indicators The status indicators of the DX40 are described in Table 1-7 . The operational status of t...
Page 19 - Pinouts; SFP; Tx
C HAPTER 1 - Overview Pinouts DX40 Serial Device Router Installation Guide 7 1.4 Pinouts The following subsections describe the pinouts of the connectors used with the DX40. 1.4.1 RJ45 Table 1-8 defines the pinout of the RJ45 connector used with the DX40. RJ45 connectors can be used on one of the Et...
Page 21 - Chapter 2; Installation; Preparing for Installation; Tools; Site Suitability
DX40 Serial Device Router Installation Guide 9 Chapter 2 Installation This chapter provides specific procedures for installing the Magnum DX40, preparing for installation, and uninstalling the device. 2.1 Preparing for Installation The DX40 is designed to be installed on a DIN rail system or on a pa...
Page 22 - Wiring and Grounding Guidelines
C HAPTER 2 - Installation Preparing for Installation DX40 Serial Device Router Installation Guide 10 2.1.3 Wiring and Grounding Guidelines The DX40 requires several different types of connectors, cables, and wires. Requirements and recommendations are listed below: Fiber The fiber cables connected t...
Page 23 - Fiber Optic Safety; Fiber Optic Handling; External Connections
C HAPTER 2 - Installation Preparing for Installation DX40 Serial Device Router Installation Guide 11 2.1.4 Fiber Optic Safety Before installing the DX40 you should be aware that devices that employ laser technology, such as the fiber optical SFP ports and associated cabling, can be dangerous. Do not...
Page 24 - Unpacking; Attaching Optional Ethernet Fiber Optic SFPs
C HAPTER 2 - Installation Unpacking DX40 Serial Device Router Installation Guide 12 2.2 Unpacking Unpack and inspect the DX40. The DX40 is shipped with the following items in the box: • DX40 unit • Appropriate mounting brackets: for DIN rail applications the DIN mounting bracket is permanently attac...
Page 25 - Installation of the DX40 Unit; Mounting; Mounting on a Panel
C HAPTER 2 - Installation Installation of the DX40 Unit DX40 Serial Device Router Installation Guide 13 To install an SFP in port E1 or E2: 1. Slide the SFP into the Ethernet port until it is firmly seated. 2. Attach the protective cap to avoid contamination until you are ready to attach cable. 2.3 ...
Page 26 - Mounting in a DIN Rail System
C HAPTER 2 - Installation Installation of the DX40 Unit DX40 Serial Device Router Installation Guide 14 2.3.1.2 Mounting in a DIN Rail System The DIN rail bracket is attached with rivets to the narrow surface of the DX40 opposite the LED display. The bracket attaches to the DIN rail by means of a pa...
Page 27 - Connecting Facility Power; Making the Ground and Power Connections
C HAPTER 2 - Installation Installation of the DX40 Unit DX40 Serial Device Router Installation Guide 15 Figure 2-4. Unmounting from a DIN Rail System 2.3.2 Connecting Facility Power The DX40 comes in either high or low voltage models. The unit does not have a power on/off switch and is active when t...
Page 28 - or
C HAPTER 2 - Installation Installation of the DX40 Unit DX40 Serial Device Router Installation Guide 16 Figure 2-5. Ground and Power Connections Making the Ground Connection The ground wire should be 14 AWG terminated with a #6 ring lug. Make the facility ground connection as follows: 1. Loosen the ...
Page 29 - note: this connection is not polarity sensitive.
C HAPTER 2 - Installation Installation of the DX40 Unit DX40 Serial Device Router Installation Guide 17 Figure 2-6. Power and Ground Properly Connected Making the Power Connection The power wires should be 14 AWG. Smaller wires may be used, down to 18 AWG, but verify that they meet your local electr...
Page 30 - Connecting Network Cables; Connecting Serial Cables
C HAPTER 2 - Installation Installation of the DX40 Unit DX40 Serial Device Router Installation Guide 18 Figure 2-7. Non-Polarized Power Input 2.3.3 Connecting Network Cables There are three types of connections that can be made to the DX40. They are serial, Ethernet copper, and Ethernet fiber optic....
Page 31 - Connecting Fiber Ethernet Cables; Maintenance; Removing the DX40
C HAPTER 2 - Installation Maintenance DX40 Serial Device Router Installation Guide 19 2.3.3.3 Connecting Fiber Ethernet Cables Ports E1 (and, optionally, E2) can be configured with SFPs to support fiber optic connections. These ports accept LC type connectors. The procedure for installing these conn...
Page 32 - Disconnecting Network Cables; Packing the DX40 for Shipment
C HAPTER 2 - Installation Maintenance DX40 Serial Device Router Installation Guide 20 2.4.1.1 Disconnecting Network Cables The sequence for removal of the serial and Ethernet cables is not important, but it is important to note that there are active devices connected to each end of the cable. 1. Rem...
Page 33 - Cleaning Fiber Optic Devices; Cleaning Connectors
C HAPTER 2 - Installation Maintenance DX40 Serial Device Router Installation Guide 21 If you have not saved the original shipping container then place the unit in a box so that normal shipping activities will not cause any damage to the unit. GarrettCom Utility Networks has no responsibility for the...
