GarrettCom FT14 - Manuals - manualsarea.com

Page 2 - www GarrettCom com; Magnum; Trademarks

FT14 and FT14H 10Mb Media Converters Installation and User Guide (09/04) i www GarrettCom com . . Magnum ™ FT14 and FT14H 10Mb/s Media Converters Installation and User Guide Part #: 84-00134 Rev. A (09/04) Trademarks Ethernet is a trademark of Xerox Corporation NEBS is a trademark of Telcordia Techn...

Page 3 - Federal Communications Commission; measures may be required to correct the interference.

FT14 and FT14H 10Mb Media Converters Installation and User Guide (09/04) ii www GarrettCom com . . Federal Communications Commission Radio Frequency Interference Statement This equipment generates, uses and can radiate frequency energy and if not installed and used properly, that is in strict accord...

Page 4 - Contacting GarrettCom, Inc

FT14 and FT14H 10Mb Media Converters Installation and User Guide (09/04) iii www GarrettCom com . . Contacting GarrettCom, Inc Please use the mailing address, phone and fax numbers and email address listed below: GarrettCom, Inc. 47823 Westinghouse Dr. Fremont, CA 94539 Phone (510) 438-9071 Fax (510...

Page 5 - TABLE OF CONTENTS

FT14 and FT14H 10Mb Media Converters Installation and User Guide (09/04) iv ww Garr w ettCom com . . TABLE OF CONTENTS Page 1.0 SPECIFICATIONS ............................................................................... 1 1.1 Technical Specifications .................................................

Page 6 - Power Budget Calcs for Fiber Media Magnum FT14-serie

FT14 and FT14H 10Mb Media Converters Installation and User Guide (09/04) v www GarrettCom com . . 3.6 Connecting Ethernet Media ............................................................... 34 3.6.1 Connecting Twisted Pair (RJ-45 ports)...................................... 34 3.6.2 Connecting Fib...

Page 7 - Revisions

FT14 and FT14H 10Mb Media Converters Installation and User Guide (09/04) vi www GarrettCom com . . Revisions Rev A 09/04: Minor updates on UL Requirements, power supplies Rev A 06/04: Minor updates on Agency approvals and power supplies Rev A 05/03: Initial release of this user manual for FT14 and F...

Page 8 - Technical Specifications; Network

FT14 and FT14H 10Mb Media Converters Installation and User Guide (09/04) 1 www GarrettCom com . . 1.0 SPECIFICATIONS 1.1 Technical Specifications Model FT14, FT14H multi-mode and single-mode Performance: Data Rate: 10 Mbps (IEEE 802.3), half duplex mode Network Standards: Ethernet: Ethernet V1.0/2.0...

Page 9 - Maximum Standard Ethernet Segment Lengths:; Note: Magnum Media Converters; Operating Environment:; Cold start down to -25

FT14 and FT14H 10Mb Media Converters Installation and User Guide (09/04) 2 www GarrettCom com . . Maximum Standard Ethernet Segment Lengths: 10BASE-T (twisted pair): 100 m (328 ft) 10BASE-FL Fiber optic : 2.0 km (6,562 ft) 10BASE-FL Single-mode Fiber optic: 10.0 km (32,810ft) Note for single-mode: H...

Page 10 - Power Supply; shall be provided with a Listed 5 A DC fuse in the supply circuit.

FT14 and FT14H 10Mb Media Converters Installation and User Guide (09/04) 3 www GarrettCom com . . Ambient Relative Humidity: 5% to 95% (non-condensing) UL 2043 tested for above-the –ceiling (plenum) installation Conformal coating (humidity protection) option, request quote. Designed for NEBS complia...

Page 11 - for; DC to unit; internal (range of 18 to 36V DC)

FT14 and FT14H 10Mb Media Converters Installation and User Guide (09/04) 4 www GarrettCom com . . 100-240V AC at 50-60Hz, for high temp. with built-in IEC320 connector for “-Hi” DC to unit : “Hi” international model 9V DC, 2.5mm jack, center +ve, 6ft. cord Power Supply ( DC Direct): built-in termina...

Page 12 - Weight; Convection, plus the case is used as a heat sink on “H” models; Media Converter LED Indicators:

FT14 and FT14H 10Mb Media Converters Installation and User Guide (09/04) 5 www GarrettCom com . . RJ-45 Port: Modular 8-Pin female, with “cross-over” up-link switch Fiber Port: Fiber optic (standard ST type) Packaging: Enclosure: Rugged sheet metal (Steel). Dimensions, Media Converter unit: Height x...

Page 13 - Metal Mounting clips for panel mounting; NEBS L3 and ETSI compliant; IEEE P1613 Env. Std for Electric Power Substations; H Model: NEMA TS-2 and TEES for traffic control equipment

FT14 and FT14H 10Mb Media Converters Installation and User Guide (09/04) 6 www GarrettCom com . . Metal Mounting clips for panel mounting : included DIN-Rail mounting option : Model # DIN-RAIL MC2 (see Section 3.4) Rack-mount option : MC14-TRAY, see http://www.garrettcom.com/mc_tray.htm Mean Tine Be...

Page 14 - Summary of models and descriptions:

FT14 and FT14H 10Mb Media Converters Installation and User Guide (09/04) 7 www GarrettCom com . . 1.2 Summary of models and descriptions: FT14-Hd = TP to 10Mb mm Fiber ST, external 115 60Hz AC power supply, for 0 to 50`C FT14-Hi = TP to 10Mb mm Fiber ST, external 230 50Hz AC power supply, for 0 to 5...

Page 15 - features and typical applications.; Inspecting the Package and the Product; This package should contain:

FT14 and FT14H 10Mb Media Converters Installation and User Guide (09/04) 8 www GarrettCom com . . 2.0 INTRODUCTION This section describes the FT14 and FT14H models, including appearance, features and typical applications. 2.1 Inspecting the Package and the Product Examine the shipping container for ...

Page 16 - Product Description

FT14 and FT14H 10Mb Media Converters Installation and User Guide (09/04) 9 www GarrettCom com . . Remove the Magnum Media Converter from the shipping container. Be sure to keep the shipping container should you need to ship the unit at a later date. In the event there are items missing or damaged co...

Page 17 - GarrettCom; Magnum FT14

FT14 and FT14H 10Mb Media Converters Installation and User Guide (09/04) 10 www GarrettCom com . . The FT14 regular-package units are for office and wiring closet environments and use an external AC power supply. A metal case with convection cooling is featured. LINK LINK RX/ACT PWR FIBER COPPER P 9...

Page 19 - Twisted Pair; Fiber optic - ST Connector

FT14 and FT14H 10Mb Media Converters Installation and User Guide (09/04) 12 www GarrettCom com . . All units are compatible with Ethernet V 1.0 / 2.0 specifications and comply with IEEE 802.3 standards. Twisted Pair ( 10BASE- Fiber optic - ST Connector (10BASE-FL and LINK LINK RX/ACT PWR FIBER COPPE...

Page 21 - for power supply and LED function specifications.

FT14 and FT14H 10Mb Media Converters Installation and User Guide (09/04) 14 www GarrettCom com . . extended temperature power supply AC/DC (External/Internal) to qualify for un- controlled and Industrial application. Each converter features two full sets of LEDs that convey essential diagnostic and ...

Page 22 - Reduces Network Costs; of an existing network.; Fiber / twisted-pair models for all fiber modes

FT14 and FT14H 10Mb Media Converters Installation and User Guide (09/04) 15 www GarrettCom com . . 2.3 Features and Benefits Reduces Network Costs Magnum Media Converters offer the ideal solution to efficiently and inexpensively connect Twisted Pair with 10Mb Fiber media within an expanding Ethernet...

Page 23 - Two sets of LEDs for viewing status from any angle.; of LEDs to provide status information when viewed at any angle or; Rugged metal case, Industrial grade; FT14 Media Converters have a robust design and are packaged in a; AC and DC Power Supplies with extended temperature ratings; FT14 & FT14H Media Converters are designed for use in temperature; un

FT14 and FT14H 10Mb Media Converters Installation and User Guide (09/04) 16 www GarrettCom com . . Two sets of LEDs for viewing status from any angle. Each FT14 Media Converter is equipped with a two sets (front and side) of LEDs to provide status information when viewed at any angle or mounting arr...

Page 24 - Compact design, mount anywhere

FT14 and FT14H 10Mb Media Converters Installation and User Guide (09/04) 17 www GarrettCom com . . Qualified to use for temperature un-controlled “outdoor” application The Magnum FT14H Hardened version of media converter supports the ambient temperature rating up to –40C to +75C for DC options model...

Page 25 - Applications for FT14’s and hardened FT14H’s; pair and Fiber. Equipped with wide variety of options of AC and DC

FT14 and FT14H 10Mb Media Converters Installation and User Guide (09/04) 18 www GarrettCom com . . 2.4 Applications for FT14’s and hardened FT14H’s The primary function of a 10Mb Ethernet Media Converter is to permit two different 10Mb media types to coexist inexpensively within the same network by ...

Page 26 - Expanding longer distance through Fiber o; 0Base-T Ethernet Segment

FT14 and FT14H 10Mb Media Converters Installation and User Guide (09/04) 19 www GarrettCom com . . In this application, in a Industrial environment where extended temp. supported units is a requirement, the existing Twisted pair network can be easily connected to longer distance through fiber media ...

Page 27 - For 10Mb FT14-series Media converters, the twisted-pair to fiber

FT14 and FT14H 10Mb Media Converters Installation and User Guide (09/04) 20 www GarrettCom com . . 2.5 Full / Half-duplex capability For 10Mb FT14-series Media converters, the twisted-pair to fiber combination is capable of full-duplex (i.e., simultaneously transmitting and receiving on the same cab...

Page 28 - Fiber

FT14 and FT14H 10Mb Media Converters Installation and User Guide (09/04) 21 www GarrettCom com . . networks, the LINK signal on a managed switch (or hub) port is used as an indicator that the attached cable segment is installed and operable. The network manager, using the SNMP agent, can troubleshoo...

Page 29 - the cable attached to a managed switch port.; Note that a pair of F

FT14 and FT14H 10Mb Media Converters Installation and User Guide (09/04) 22 www GarrettCom com . . the cable attached to a managed switch port. The Link-Pass-through in the FT14H models provides the LINK “see-through” feature desired for managed networks. On the FT14H models, either both LINK LEDs a...

Page 30 - Locating the Media Converter Unit; Secure attachment of mounting

FT14 and FT14H 10Mb Media Converters Installation and User Guide (09/04) 23 www GarrettCom com . . 3.0 INSTALLATION This section describes the installation of the Magnum FT14-series Media Converters, including location, segment distance calculation and media connection. 3.1 Locating the Media Conver...

Page 31 - internal DC input 9V, 24V or –48V DC or external AC through 9V DC jack.

FT14 and FT14H 10Mb Media Converters Installation and User Guide (09/04) 24 www GarrettCom com . . Velcro strip may be used for mounting the unit on a vertical surface such as a wall or cabinet, or for securing the unit on a table-top or shelf. Alternatively, metal mounting clips and screws are incl...

Page 35 - Metal mounting screws in the bottom-front hold each of the media

FT14 and FT14H 10Mb Media Converters Installation and User Guide (09/04) 28 www GarrettCom com . . The side-view picture shown here (above) is an example of an installation of the model MC14-TR+PS9, 19” rack-mount tray, holding a few 10Mbps FT14’s and 100Mb 14E Media Converters, each with their powe...

Page 36 - The Magnum FT14 Models with; A Magnum FT14H is shown alongside the DIN-Rail-MC2 bracket; Special consideration must be given to maximum cable

FT14 and FT14H 10Mb Media Converters Installation and User Guide (09/04) 29 www GarrettCom com . . The metal DIN-Rail mounting hardware is optional and needs to be ordered as a separate item, e.g. Model # DIN-RAIL- MC2. It comes with four screws to attach the bracket to the MC unit. The rail clip is...

Page 38 - Connectivity between Fiber and TP Ethernet Media.

FT14 and FT14H 10Mb Media Converters Installation and User Guide (09/04) 31 www GarrettCom com . . Twisted Pair ( 10BASE-T) Y = 55m Fiber optic - ST Connector (10BASE-FL and FOIRL) X = 780m LINK LINK RX/ACT PWR FIBER COPPER P 9VDC .0.3AMP GarrettCom Best Ethernet at its L = X A L K X = UP LIN RX/ACT...

Page 39 - Media Distance Formula for Magnum Media Converters:; Where; Distance Calculation Example:

FT14 and FT14H 10Mb Media Converters Installation and User Guide (09/04) 32 www GarrettCom com . . Media Distance Formula for Magnum Media Converters: X% + Y% < 100% Where X = The segment distance on one side of the Magnum Media Converter divided by the Standard Maximum Media Distance for that me...

Page 40 - Where more than one media converter is used in one segment run, the

FT14 and FT14H 10Mb Media Converters Installation and User Guide (09/04) 33 www GarrettCom com . . allowable distance for UTP 10BASE-T media (100 m) [55/100 x 100% = 55%]. The total of the two percentages (39% + 55%) is 94%, which is allowable. Note 1: Where more than one media converter is used in ...

Page 41 - Connecting Ethernet Media; end to the appropriate connector.

FT14 and FT14H 10Mb Media Converters Installation and User Guide (09/04) 34 www GarrettCom com . . 3.6 Connecting Ethernet Media Connecting Ethernet media to the Magnum FT14 Series Media Converter is very simple and straightforward. Using proper media segment, simply attach the cable end to the appr...

Page 42 - is connected properly at both ends and is not defective.

FT14 and FT14H 10Mb Media Converters Installation and User Guide (09/04) 35 www GarrettCom com . . 2. Connect the other end of the cable to the corresponding device. Use the LINK LED to ensure proper connectivity by noting that the LED will be illuminated when the units are powered and proper connec...

Page 44 - Budget; where P

FT14 and FT14H 10Mb Media Converters Installation and User Guide (09/04) 37 www GarrettCom com . . 5. The LINK LED corresponding to the fiber port on the front of the product will illuminate (for standard non-Link-Pass-through models) when a proper connection has been established at both ends (and w...

Page 47 - the user to deploy in uncontrolled temperature environments.; VDC; The Internal 9V DC (8 – 15V

FT14 and FT14H 10Mb Media Converters Installation and User Guide (09/04) 40 www GarrettCom com . . The FT14H Hardened media converters are designed to provide reliable operation, withstand higher temperature environments, and provide the direct DC power choices to the user to deploy in uncontrolled ...

Page 48 - Each

FT14 and FT14H 10Mb Media Converters Installation and User Guide (09/04) 41 www GarrettCom com . . Note: When connected to a -48 V centralized dc source these products are to be installed only in Restricted Access Areas (dedicated equipment rooms, electrical closets or the like). 4.2 Powering the FT...

Page 49 - DC Power Terminals; : Terminal for “earth” or ground wire connection to the FT14H chassis; Input Voltage

FT14 and FT14H 10Mb Media Converters Installation and User Guide (09/04) 42 www GarrettCom com . . is also present and optionally can be used with an external AC power supply. DC Power Terminals : “+”, “-”, floating GND : Terminal for “earth” or ground wire connection to the FT14H chassis Input Volt...

Page 50 - Power Consumption; This section describes the proper

FT14 and FT14H 10Mb Media Converters Installation and User Guide (09/04) 43 www GarrettCom com . . 0.2 amp max.(-48V DC) Power Consumption : 1.5 watts typical, 2 watts maxm. 4.3 FT14H, DC-powered, -48VDC, 24VDC and 9VDC Installation This section describes the proper connection of the -48VDC leads (o...

Page 51 - The GND can be hooked up at the last.

FT14 and FT14H 10Mb Media Converters Installation and User Guide (09/04) 44 www GarrettCom com . . terminals are identified as positive (+) and negative (-), and they are floating inside the unit so that either of the terminal may be grounded by the user if desired. The chassis is “earth” or ground ...

Page 52 - LED Description; Illuminates GREEN to indicate power applied.

FT14 and FT14H 10Mb Media Converters Installation and User Guide (09/04) 45 www GarrettCom com . . 4.4 Dual LEDs, front-panel and side-panel (Magnum FT14 and FT14H) LED Description PWR/P Illuminates GREEN to indicate power applied. LINK/L (TP) Illuminates GREEN, Steady ON when both attached cable se...

Page 55 - Before Calling for Assistance; connected and the cables/wires have not been crimped or in some way

FT14 and FT14H 10Mb Media Converters Installation and User Guide (09/04) 48 www GarrettCom com . . 5.1 Before Calling for Assistance 1. If difficulty is encountered when installing or operating the unit, refer back to the Installation Section of the applicable chapter of this manual. Also check to m...

Page 56 - the problem is corrected. If not, go to Step 5 below. If the problem is

FT14 and FT14H 10Mb Media Converters Installation and User Guide (09/04) 49 www GarrettCom com . . 4. If the problem is isolated to a network device other than the Magnum FT14/FT14H 10 Mb/s Media Converters product, it is recommended that the problem device is replaced with a known good device. Veri...

Page 57 - When Calling for Assistance; Please be prepared to provide the following information.

FT14 and FT14H 10Mb Media Converters Installation and User Guide (09/04) 50 www GarrettCom com . . 5.2 When Calling for Assistance Please be prepared to provide the following information. 1. A complete description of the problem, including the following points: a. The nature and duration of the prob...

Page 58 - Return Material Authorization (RMA) Procedure

FT14 and FT14H 10Mb Media Converters Installation and User Guide (09/04) 51 www GarrettCom com . . 3. It is useful to include other network equipment models and related hardware, including personal computers, workstations, terminals and printers; plus, the various network media types being used. 4. ...

Page 61 - Shipping and Packaging Information; outside of the shipping container.

FT14 and FT14H 10Mb Media Converters Installation and User Guide (09/04) 54 www GarrettCom com . . 5.4 Shipping and Packaging Information Should you need to ship the unit back to GarrettCom, please follow these instructions: 1. Package the unit carefully. It is recommended that you use the original ...

Page 62 - Westinghouse

FT14 and FT14H 10Mb Media Converters Installation and User Guide (09/04) 55 www GarrettCom com . . 4. Ship the package to: GarrettCom, Inc. 47823 Westinghouse Dr. Fremont, CA 94539 Attn.: Customer Service APPENDIX A: WARRANTY INFORMATION GarrettCom, Inc. warrants its products to be free from defects...

Page 63 - modification other than by GarrettCom.

FT14 and FT14H 10Mb Media Converters Installation and User Guide (09/04) 56 www GarrettCom com . . This warranty will not be effective if, in the opinion of GarrettCom, the product has been damaged by misuse, misapplication, or as a result of service or modification other than by GarrettCom. Garrett...