Gardner Bender GUSB-3450 - User Manual

Gardner Bender GUSB-3450

Gardner Bender GUSB-3450 Multimeter – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
Page: / 2
Loading the manual

IMPORTANT: RECEIVING INSTRUCTIONS

Visually inspect

all components for shipping damage. If you find damage, notify the
carrier at once.

Shipping damage is NOT covered by warranty. The carrier
is responsible for all repair or replacement costs resulting from
damage in shipment.

1

OPERATING INSTRUCTIONS

USB Multimeter

Model GUSB-3450

1. CAUTION
REFER TO THIS MANUAL BEFORE USING THIS TESTER.

2. SPECIFICATIONS:

Operating Range: 3-5.5 VDC, 0-3 ADC

Indicators: Visual Only

USB Type: 3.0-3.1 Type A

Cleaning: Remove grease and grime with clean, dry cloth.

3. OPERATION:

Note: When testing chargers and cables it’s best to use a device that is less than 50% charged because at higher states

of charge the current draw will typically be reduced.

To check phone/device wall chargers:

1. Plug the USB Multimeter into the wall charger to be tested

a. A properly functioning USB port will supply approximately 4.40 V – 5.25 V. A value significantly different

indicates a defective charger

2. Plug a known good cable into the USB Multimeter (Refer to check cables section)

3. Plug the phone/device into the other end of the cable

4. Note the voltage (V) and current (A) values displayed on the USB Multimeter, the display alternates between voltage

(V) and current (A) every 5 seconds

5. A properly functioning wall charger will typically output 80%-90% of its rated current (A) capacity when charging a

phone/device that is less than 50% charged

a. Note: Maximum charging current (A) may be limited by the device being charged. For example the charging

current (A) of a tablet may be significantly higher than a phone.

Function

Range

Resolution

Accuracy

Voltage

3V-5.5 VDC

0.01V

±2%

Current

0A-3 ADC

0.01A

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Other Gardner Bender Multimeters Models