Fusion PPSW12H - Manual - manualsarea.com

Page 3 - RECORD YOUR PRODUCT DETAILS HERE:; AFFIX RECEIPT HERE; TABLE OF CONTENTS

333 RECORD YOUR PRODUCT DETAILS HERE: MODEL NUMBER _______________________________ DATE OF PURCHASE______________________ AFFIX RECEIPT HERE WARNING! Audio Systems can produce sound levels over 135dB. Continuous exposure to sound pressure levels over 100dB may cause permanent hearing loss!Please wat...

Page 4 - SUBWOOFER FEATURES

444 SUBWOOFER FEATURES FUSION subwoofers are low frequency drivers capable of delivering extremely high bass levels from small enclosures. In order to achieve the maximum performance from your new FUSION Subwoofer, please use one of the recommended sized enclosures that best suits your application. ...

Page 5 - SUBWOOFER THEILE/SMALL PARAMETERS

555 SUBWOOFER THEILE/SMALL PARAMETERS Subwoofer Parameters PP-SW10E PP-SW12E PP-SW15E MAX Power Rating (Watts) 750 900 1200 RMS Power Rating (Watts) 250 300 400 Coil Height (Hvc) (mm) 25 25 25 Compliance (Cms) (uM/N) 281.69 248.25 148.67 Cone Area (Sd) 31.41 49.09 80.42 D.C.Coil Resistance (Re) 1.81...

Page 7 - SUBWOOFER; DIMENSIONS

777 SUBWOOFER PP-SW10E DIMENSIONS 282mm (11– 1/8") 282mm (11– 1/8") 282mm (11 –1/8") 184mm (7 –1/4") 161mm (6 – 3/8" ) 240mm (9 – 7/16")

Page 13 - ENCLOSURES; A ported enclosure is generally larger than a sealed enclosure; OPTIMUM ENCLOSURES

13 13 13 ENCLOSURES All enclosures include port and subwoofer displacement. All ports are circle aero ports unless otherwise stated. Ported Enclosures: A ported enclosure is generally larger than a sealed enclosure Sealed Enclosures: A sealed enclosure will be the smallest enclosure you can build. I...

Page 14 - To calculate

14 14 14 ENCLOSURE CONSTRUCTION All enclosures should be constructed from 18mm (3/4”) Medium Density Fibre board. Enclosures should be glued and screwed, because MDF is porous. FUSION recommends sealing the internal sides with a polyurethane sealer prior to installation. To accurately cut the subwoo...

Page 15 - ENCLOSURE TEST CURVES; Hz

15 15 15 5 10 50 100 500 1000 20K 87 81 93 99 105 111 117 123 Hz dB Amplitude Response (dB-SPL/Hz at 1 m) with 750 watts ENCLOSURE TEST CURVES SEALED 5 10 50 100 500 1000 20K 87 81 93 99 105 111 117 123 Hz dB Amplitude Response (dB-SPL/Hz at 1 m) with 750 watts PORTED SUBWOOFER PP-SW10E

Page 21 - TECH TIPS; OHMS LAW SIMPLIFIED; IR; WR; POWER CABLE CALCULATOR

21 21 21 TECH TIPS OHMS LAW SIMPLIFIED IR E voltage watt s amperage curren t resistance R I W E I E 2 W W I 2 E 2 R I 2 R W E ER WR W I W/R EI POWER CABLE CALCULATOR TOTAL AMPERAGE 0-4 FT 4-7 FT 7-10 FT 10 -13 FT 13-16 FT 16-19 FT 19-22 FT 22-28 FT 0 – 20 14 12 12 10 10 8 8 8 20 – 35 12 10 8 8 6 6 6...

Page 22 - SUBWOOFER RULER GUIDE

22 22 22 SUBWOOFER RULER GUIDE Use the FUSION ruler guide to create a perfect subwoofer mounting surface. 1: Mark the centre position on the MDF (Medium Density Fibre) board where the subwoofer is to be mounted. 2: Fix the ﬁrst hole (centre) to the marked out position on the MDF. 1 2 3 4 6 7 8 9 11 ...

Page 23 - : Scribe a perfect cut out diameter onto the MDF board.

23 23 23 5: Using a jigsaw or router, cut out this measurement. 3: Insert a pencil into the correct subwoofer cut out measurement. 10", 12", or 15". 1 2 3 4 6 7 8 9 11 12 13 14 16 (inch) (mm) Centre 1 " 0 cutout 15" cutout 12" cutout 10" outside 263mm 12" outside 312m...

Page 25 - Ohms x 8 Ohms

25 25 25 SERIES WIRING FORMULA FOR 2 SPEAKERS 4 Ohm + + + – – – 8 Ohms R1 + R2 = LOAD IMPEDANCE 4 Ohm PARALLEL WIRING FORMULA FOR 2 SPEAKERS 4 Ohm 8 Ohm 2.67 Ohms R1 x R2 R1 + R2 4 Ohms x 8 Ohms 4 Ohms + 8 Ohms 32 12 = LOAD IMPEDANCE = = 2.67 Ohms

Page 26 - TROUBLE SHOOTING; : Check the connections from amplifier, processor or head unit.; INSTALLATION WARNING

26 26 26 TROUBLE SHOOTING No sound from your subwoofer : Check ampliﬁer and wiring connections. Distorted sound : Check the connections from ampliﬁer, processor or head unit. Subwoofer makes unusual noise in sealed enclosure : The enclosure may have leaks causing a lack of back pressure. Remove the ...

Page 27 - NOTES

27 27 27 NOTES � � � � � � � � � � � � � � � � � � YOU CAN HELP PROTECT THE ENVIRONMENT! Please remember to respect the local regulations: Hand in the non-working electrical equipment to an appropriate waste disposal center. PUBLISHED BY FUSION ELECTRONICS LIMITED:© Copyright 2006 by FUSION Electron...

Fusion PPSW12H - Manual

Table of Contents:

Summary

Other Fusion Models