Fusion L50B PRO - Manual
Fusion L50B PRO – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – SpECIAL FEATUrES; SpEciFicAtions
- Page 4 – SAFEty prEcAutions
- Page 7 – Input powEr; Output BAttEry ConnEctions
- Page 8 – NiCd Mode; OpErAtion
- Page 9 – NiMH Mode
- Page 10 – Setting Battery Capacity; Setting Battery Voltages For Li-Ion Battery Pack
- Page 12 – Setting Charge Current; Battery Pack; Pb Mode
- Page 13 – Displays During Charge; ScrEEn DisplAys; Completion Display (with Audible Warning)
- Page 14 – Error mEssAgEs
- Page 16 – ogic; rC
Thank you for purchasing this Typhoon L50B Pro charger. We are sure you will be pleased
with its performance and features. In order to ensure that you obtain the maximum benefit
from its operation, please read these instructions carefully.
TYPHOON
L50B Pro
opErAting instructions
Please keep for future reference
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
1 Input Voltage 11~15V DC Battery Type & Cells 1~5 Lithium-Ion or Lithium-Polymer cells (3.6V or 3.7V respectively) 1~6 LiFePO4 cells (3.3V) 1~14 Nickel-Cadmium cells 1~14 Nickel-Metal Hydride cells 1 - 6 Lead-Acid cells (2V per cell) Battery Capacity 100mAh ~ 6000mAh adjustable ONLY for Lithium...
2 SAFEty prEcAutions • DO NOT attempt to charge incompatible types of rechargeable batteries. This charger is designed to only charge and discharge Nickel-Cadmium, Nickel-Metal Hydride, Lithium-Ion, Lithium-Polymer, LiFePO4 and Lead- Acid batteries. • Make sure you place the charger on a firm level ...
5 Input powEr 12V DC Connect the charger’s red alligator clip to the positive (+) terminal on the power source and the black alligator clip to the negative (-) terminal. The charger will display “Input voltage” error message if the input is below 11V or above 15V. If this happens, please recheck the...
