Page 2 - WARNINGS AND CAUTIONS; Do not attempt to open the unit’s chassis.; USING iPod; All USB fl ash drives used with this unit must be formatted to; Care and Maintenance
1 Version 1.0 WARNINGS AND CAUTIONS Do not attempt to open the unit’s chassis. There are no user-serviceable parts or adjustments inside. USING iPod This unit has been tested with compatible authentic iPod models under normal expected operating conditions, free from any pre-existing defects in eithe...
Page 3 - R ECOR D YOU R PRODUCT DETAILS H ER E:; MODEL NUMBER
69 NOTES ................................................................................................................................................................................................................ .....................................................................................
Page 4 - CONTE NTS
3 CONTE NTS USER INTERFACE AND CONTROLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Control Panel Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Button Description . . . . . . . . . . . . ...
Page 5 - NOTES
67 NOTES ................................................................................................................................................................................................................ .....................................................................................
Page 6 - USE R I NTE RFACE AN D CONTROLS; BUTTON DESCR IPTION; CONTROL PAN EL LAYOUT
5 USE R I NTE RFACE AN D CONTROLS BUTTON DESCR IPTION PR I MARY SOU RCE MS-IP700 MS-AV700 CONTROL PAN EL LAYOUT Menu Power Tuner source Rewind Mute Auxiliary DVD Play/Pause Clock iPod Forward Brightness 66 selecting audio tracks ..........................................................................
Page 7 - ROTARY E NCODE R AN D M E NU KEY; Menu key before using the unit.; ROTARY ENCODER OPERATION; You can use the Menu key to open or to exit from menus:; Menu key
65 sub fi lter, setting ........................................................................................................................................................... 54 tel mute setting ........................................................................................................
Page 8 - USI NG TH E ROTARY ENCODER AN D M ENU KEY; and open control screens.; Adjusting levels; Use the Encoder and Menu key to adjust levels on the 700 Series.; Accessing Menus; Use the Menu key and Encoder to access menus to change settings.
7 USI NG TH E ROTARY ENCODER AN D M ENU KEY You can use the Rotary Encoder and Menu key to adjust levels, access menus and open control screens. Adjusting levels Use the Encoder and Menu key to adjust levels on the 700 Series. For example, to adjust the volume level: Accessing Menus Use the Menu key...
Page 9 - INDEX; Opening Control Screens; GETTI NG STARTE D; POWER I NG TH E U N IT ON OR OFF; To power the unit on or off.; I NPUT SOU RCE SCR EENS; The 700 Series supports a wide range of input source types,; Power
63 INDEX 700 Series control panel, layout. ......................................................................................................................................................... 5 ethernet support .......................................................................................
Page 10 - ADJUSTI NG VOLUM E LEVEL; LICENSI NG; registered in the US and other countries.
9 Both models are also SiriusXM ready (requires optional Sirius receiver. USA only). For further details of setting up Sirius options see “Sirius XM Radio” on page 49. When you select one of these sources, the 700 Series displays a source screen, similar to the AM source screen shown in Figure 1 bel...
Page 11 - Tuning range; Europe and Australasia; VHF tuning range; Mute; To adjust the volume level:; MUTI NG OUTPUT; To mute and unmute the volume:; All Zones
61 Tuning range Europe and Australasia FM radio frequency range 87.5–108 MHz. Frequency step 100 kHz AM radio frequency range 522–1620 MHz. Frequency step 9 kHz USA FM radio frequency range 87.5–107.9 MHz. Frequency step 200 kHz AM radio frequency range 530–1710 MHz. Frequency step 10 kHz Japan FM r...
Page 12 - ADJUSTI NG SUB-WOOFER LEVEL AN D TON E; SUPPORT, SALES AN D SERVICE; FCC compliance statement; DVD player; Auxiliary input sensitivity
11 ADJUSTI NG SUB-WOOFER LEVEL AN D TON E Use the Sub level and Tone screens to set the sub-woofer levels and tone. Sub-woofer level can be adjusted for each Zone individually, but tone adjustments affect all Zones. Menu key Encoder To set sub-woofer levels or tone: 1. Press and hold down the Encode...
Page 13 - “Clock Setting” on page 48.; Clock; • Press the Clock key to display the current time
59 Problem Solution iPod Why does my FUSION Head unit keep locking up when connected to my iPod/iPhone? If you are experiencing software lock-ups or your unit freezes: • Reset the Head unit by pressing the reset button inside the face plate. • Reset your iPod/iPhone (see Apple website from model-spe...
Page 14 - SETTI NG AN D CLEAR I NG TH E ALARM; Alarm enabled; TROUBLESHOOTI NG
13 SETTI NG AN D CLEAR I NG TH E ALARM Use alarm mode to turn on the 700 Series at a pre-defi ned time. When the alarm is activated, your 700 Series will play the last selected input source at the volume level in use when the unit was turned off. Menu key Encoder To set the alarm: 1. Press the Menu k...
Page 15 - Sources; To enable or disable the AM of VHF tuner sources:; To adjust the brightness of the display screen:; ADJUSTI NG SCR EEN BR IGHTN ESS
57 Sources Use this option to turn the AM or VHF tuner source on or off, if required. This is useful if you only listen to FM and do not wish to step through AM and VHF when selecting a tuner source. To enable or disable the AM of VHF tuner sources: 1. Press the Menu key. 2. Turn and then press the ...
Page 16 - Figure 2 – Example AM band input source screen; TU N E R; LISTEN I NG TO TH E TU N ER; To select one of the available tuner bands:; TU N ER SOU RCE SCR EENS; Tuner; Tel mute; To change the Tel mute setting:; Tuner region; To change the tuner region setting:; VHF region; To change the VHF region setting:
15 Input Source name Signal strength Tuning mode Figure 2 – Example AM band input source screen Selected frequency (or channel for VHF) Current time TU N E R LISTEN I NG TO TH E TU N ER To select one of the available tuner bands: TU N ER SOU RCE SCR EENS AM/FM/VHF An example of a typical tuner input...
Page 17 - To change the sub fi lter setting:; Key sound; To enable or disable the key sound:; Language; To enable or disable power saving mode:; Figure 3 – Example SiriusXM input source screen; SiriusXM; To tune to a required frequency, channel or preset:
55 To change the sub fi lter setting: 1. Press the Menu key. 2 . Turn and then press the Rotary Encoder to select Settings > Sub fi lter. 3. Turn the Rotary Encoder to select the required fi lter frequency. 4. Press the Rotary Encoder to save the setting and exit. 5. Press any key to exit Key sound ...
Page 18 - Channel Skipping; To set or unset a channel from being skipped:; ADVANCED SETTI NGS; Sub fi lter
17 Tuning Method Applies to… When tuning with this method… Manual All bands • Press the Forward or Backward key to step through the range of frequencies or channels one at a time. • Press and hold down the key for rapid scanning of frequencies or channels. Manual SiriusXM • Press the Forward or Back...
Page 19 - Channel Locking / unlocking; To access a locked channel:; Press the Menu key.; To lock or unlock a channel:; ADDI NG AN D R EMOVI NG PR ESETS; Note: Up to 15 presets can be stored for each radio band.; To remove one or more presets:; Remove all presets
53 3. Enter the old (current) access code by turning the Encoder to change the highlighted digit, then press the Encoder to select the next digit. When you have entered all four digits correctly, you will be prompted to enter the new access code. 4. Enter the new access code by turning the Encoder t...
Page 20 - SETTI NG UP VHF; Minimizing background noise; To set the squelch level:; Turning scan mode on; hissing sound, the unit will not scan correctly. To correct this, see; Parental mode; To change the Parental mode access code:
19 SETTI NG UP VHF Note: A marine FM antenna is required for VHF reception, DO NOT connect to a VHF splitter. Minimizing background noise Use the Squelch feature to reduce background noise on VHF input. Select a VHF channel, and then adjust the squelch control while there is nothing being transmitte...
Page 21 - Turn and then press the Encoder to select Category.; Special icons; • The padlock icon means the channel is locked or considered; PLAYI NG CONTENT; To listen to input from your iPod:; iPod SOU RCE SCR EEN
51 Category You can use the Category menu item to control which categories of channels are available (Rock, for example) when you are using the Category tuning method (see “Tuning Methods” on page 16. To select a Category: 1 . Press the Menu key. 2. Turn and then press the Encoder to select Category...
Page 22 - CONTROLLI NG iPod PLAYBACK; Selecting tracks from a playlist; Sirius XM menu options
21 CONTROLLI NG iPod PLAYBACK Selecting tracks from a playlist There can be thousands of tracks stored on an iPod, so you need to select the tracks you wish to play from one of the groupings available (such as Playlists, Artists, Albums). For example, to select tracks by artist: Press Menu key Turn ...
Page 23 - To select 12 or 24 hour clock display mode:; Turn and then press the Encoder to select Settings > Clock > 24 hour.; SI R IUS XM RADIO; Activating your Sirius XM tuner; keys. The selected track starts playing automatically.
49 5. If required, press the Encoder to move to the AM/PM fi eld (displayed in 12 hour clock mode only. See Step 7 below). Turn the Encoder to change the AM/PM setting. 6 . Press the Encoder to save the time and exit (the time out feature does not operate here). 7. If you want to use the 24 hour cloc...
Page 24 - CHANGI NG iPod SETTI NGS; iPod settings; To change a setting in the iPod settings menu:; Repeat; CLOCK SETTI NG
23 CHANGI NG iPod SETTI NGS Additional iPod control features are available through the iPod settings menu. To change a setting in the iPod settings menu: Turn and then press the Rotary Encoder to select one of the following settings to change. Then: • Turn and then press the Rotary Encoder to select...
Page 25 - Supported iPod sleeves; PR EPAR I NG FOR AUXILIARY I NPUT; Connecting auxiliary device; Subtitles; LISTEN I NG TO YOU R MUSIC; To listen to music from your USB fl ash drive:; USB FLASH DR IVE; Auxiliary
47 Supported iPod sleeves Full details of included iPod sleeves are printed on a separate card included in the box with the 700 Series. PR EPAR I NG FOR AUXILIARY I NPUT Connecting auxiliary device Connect the auxiliary device to the AUX IN cable (White and Red RCA sockets) at the rear of the 700 Se...
Page 26 - Selecting audio tracks from USB fl ash drive; Figure 5 – Example USB fl ash drive source screen
25 USB SOU RCE SCR EEN An example of a typical USB fl ash drive input source screen is shown in Figure 5 below. CONTROLLI NG USB FLASH DR IVE PLAYBACK Selecting audio tracks from USB fl ash drive You can store audio tracks (MP3 format only) on a USB fl ash drive for playback on the 700 Series. Audio tr...
Page 27 - To connect your USB fl ash drive, you will need:; Controlling playback
45 2. Insert your USB fl ash drive onto the USB socket or insert your iPod in its sleeve (see iPod compatibility sheet supplied separately) ). Make sure that the device is fi rmly pushed onto the connector socket. 3. Close the control panel door fi rmly. 4. Select input from the device, as required. MS...
Page 28 - CHANGI NG USB FLASH DR IVE SETTI NGS; To change a highlighted setting in the USB settings menu:; Before inserting iPod
27 CHANGI NG USB FLASH DR IVE SETTI NGS To change a highlighted setting in the USB settings menu: 1. Press the Encoder to toggle the value on or off. Repeat • Repeat mode is turned off. • Repeat the current selection. Shuffl e • Random play shuffl e is turned off. • Shuffl e tracks in the current folde...
Page 29 - To enter the name for the selected Zone:; PR EPAR I NG FOR iPod OR USB I NPUT; When using your iPod with either model:; LISTEN I NG TO AUXILIARY I NPUT; To listen to input from an alternate auxiliary device:; AUXILIARY SOU RCE SCR EEN; AUXILIARY I NPUT
43 To enter the name for the selected Zone: a . Select the Name menu item. The current Zone name is displayed with the fi rst character highlighted. b. If required, press the Forward (or Backward) key to highlight the character you wish to change. c. Turn the Encoder to display the required value for...
Page 30 - TOTAL AUDIO CONTROL VIA NM EA2000; FUSION MS-NRX200 Remote Control; ADDITIONAL FEATU R ES; Volume limit; To specify the volume limit for the selected Zone:; To specify the sub-woofer level for the selected Zone:; Sub level; Name
29 FUSION-Link FUSION-Link has the ability to fully control on-board FUSION Entertainment systems (Supported models), by utilizing FUSION-Link capable multi-function displays installed at the helm, fl ybridge or nav station of the vessel, providing integrated entertainment control and a less cluttere...
Page 31 - settings for that Zone.; Volume control; Enabled; To enable or disable volume control:; Link to zone 1; ETH ERN ET SUPPORT; FUSION-only installation
41 Important: If a Zone is disabled, you cannot change any of the following settings for that Zone. Volume control Zones 3 and 4 can have volume control disabled. You should disable volume control for a Zone that has its volume controlled from another amplifi er or Head unit. If volume control is: • ...
Page 32 - The following keys work the same way in all sources.; Change source; SETTI NG UP TH E 700 SE R I ES; ZON ES; • Link Zones 1 and 2.; For further details, see instructions below.; Selecting and setting up a zone; To select a Zone and modify its settings:; To enable or disable the selected Zone:; c. Press any key to exit
31 The following keys work the same way as the matching Head unit keys in all sources. Power On / Off Mute all sound Play / Pause Display clock Skip back Skip forward The following keys work the same way in all sources. Change source Volume Up / Down I NFRAR ED (I R) R EMOTE MS-AV700 model only You ...
Page 33 - 00 SE R I ES CON N ECTION EXAMPLE; Open a menu in the TV display.; DVD source not selected
39 700 SE R I ES CON N ECTION EXAMPLE ZONE 1 SPEAKER CONNECTION ZONE 1 LINE OUT ZONE 2 LINE OUT ZONE 3 LINE OUT ZONE 4 LINE OUT ZONE 2 SPEAKER CONNECTION DVD/CD MS-DKIPUSB Dock AM/FM ANTENNA AUX AUDIO MS-SW10 MS-SW10 MS-FR702 MS-FR702 MS-FR702 MS-FR702 MS-FR602 MS-FR602 MS-DA51600 MS-AB1060R MS-FM50...
Page 34 - I NSTALLI NG TH E 700 SE R I ES; Figure 7 – Dimensions - top view; INSTALLATION
33 I NSTALLI NG TH E 700 SE R I ES Dimensions are in millimeters (mm) and inches (”). Not to scale. Figure 7 – Dimensions - top view 38 53.0 (2-3/32”) 181.0 (7-1/8”) R2.0 (3/32”) 58.0 (2-9/32”) 195.0 (7-11/16”) 4.0 (5/32”) 79.0 (3-1/8”) 217.0 (8-9/16”) 16.5 (5/8”) PRODUCT OUTLINE CUTOUT DOOR OPENING...
Page 35 - Figure 8 – Dimensions - side view
37 SiriusXM ANTENNA REMOTE CONTROL (NMEA2000) ETHERNET CONNECTION ZONE 1 ZONE 2 ZONE 3 ZONE 4 AUX INPUT VIDEO OUTPUT ZONE 1 LEFT LEFT RIGHT LEFT WHITE RED YELLOW RIGHT RIGHT ZONE 2 YELLOW WHITE WHITE/BLACK GREY GREY/BLACK GREEN GREEN/BLACK PURPLE PURPLE/BLACK RED BLACK BLUE ORANGE BROWN L (white) R ...
Page 36 - CON N ECTIONS; Note
35 DESCR IPTION COLOU R Battery +12VDC Yellow Accessory +12V switched Red Negative Ground Black Remote Amplifi er Enable ouput Blue/White Dim input [12VDC active] Orange Telemute input [GND active] Brown Note : All +12V wiring MUST be fused at the power source end of your cable, with a 15 A fuse. Whe...
