Fusion CP-SW120 - Manual
Fusion CP-SW120 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
SUBWOOFERS
CS-SW100
CS-SW120
CP-SW100
CP-SW120
Peak Power (Watts)
800
1000
1000
1300
Rated Power (Watts)
200
250
250
325
Frequency Response
33Hz - 1.2kHz
27Hz -1kHz
30Hz -1.2kHz
24Hz -1kHz
Impedance
4 Ohms
4 Ohms
4 Ohms
4 Ohms
Sensitivity
87dB
88dB
88dB
89dB
Cone Material
Pressed Paper
Pressed Paper
Pressed Paper
Pressed Paper
Voice Coil Type
Round Wound
Round Wound
Round Wound
Round Wound
Copper
Copper
Copper
Copper
Mounting Depth
120mm (4-23/32”) 136mm (5-11/32”) 142mm (5-19/32”) 154mm (6 1/16”)
Mounting Diameter
228mm
277mm
228mm
277mm
(9”)
(10 15/16”)
(9”)
(10 15/16”)
CS-SW100
CS-SW120
CP-SW100
CP-SW120
SPEAKER PARAMETERS
www.fusionelectronics.com
INSTALLATION GUIDELINES
Ensure the audio system is turned off before making any connections to the amplifier, speakers or source unit.
Failure to do so could result in permanent damage to the audio system.
When wiring the subwoofer ensure that the wire is protected from sharp objects and always use rubber
grommets when wiring through metal panels. Ensure all terminals and connections are protected from the
vehicle chassis and from each other as failure to do so could result in permanent damage to the audio system.
When connecting the amplifier and subwoofer ensure you connect the positive and negative output wire from
the amplifier to the corresponding subwoofer terminals.
1) Ensure there is adequate clearance and depth for the subwoofer to be mounted
2) Mark out & cut the correct diameter hole
3) Drill the holes for the mounting screws
4) Insert the subwoofer and affix with the appropriate screws
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
