Furuno TR-1 - Manual
Furuno TR-1 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – safer and more enjoyable.; Thank You; additional heading sensor with AD10 data output.; Summary; hazards to navigation and never leave the helm unattended.; Safety; Before Starting Installation; been used, or modifications have been made to our products.
- Page 3 – NMEA Out; Radar/Chartplotter MARPA Confi guration
- Page 4 – NMEA Configuration; If the; Operation
“The Integrator”
NMEA 0183 to AD10 Converter
for Furuno Radar/Chartplotters
Installation and User Manual
906-2800-00
Ver A01
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Thank you for purchasing another quality product from TR-1 Autopilots. TR-1 is confident that you will find this piece of electronic equipment will enhance your autopilot’s ability to make your boating experience safer and more enjoyable. Thank You “The Integrator” AD10 Gateway provides the ability ...
Page 3 Mounting Considerations Installation The Integrator unit is mounted on any fl at surface, using two #6 screws provided, through the mounting holes in the case. The unit should be located so its LED is visible to the helmsman during normal boat operation, but not directly in the line of vision...
NMEA Configuration The TR-1 Gladiator’s NMEA output should be set to send at its highest rate (10 Hz). The Gladiator’s default setting is 10Hz. If you have changed this setting or do not know what setting it is on, follow these instruc- tions. Press and release the [Setup] button on the handheld, Se...
