Page 3 - IMPORTANT NOTICE; This manual is intended for use by native speakers of English.
i IMPORTANT NOTICE • No part of this manual may be copied or reproduced without written permission. • If this manual is lost or worn, contact your dealer about replacement. • The contents of this manual and equipment specifications are subject to change without notice. • The example screens (or illu...
Page 4 - ii; SAFETY INSTRUCTIONS; ELECTRICAL SHOCK HAZARD; CAUTION; Safety information for the Operator
ii SAFETY INSTRUCTIONS WARNING Do not disassemble or modify theequipment. Fire, electrical shock or serious injury canresult. Immediately turn off the power at theswitchboard if the equipment is emittingsmoke or fire. Continued use of the equipment can causefire or electrical shock. Contact a FURUNO...
Page 5 - iii; Safety information for the Installer; Attach securely protective
iii Do not open the equipmentunless totally familiar withelectrical circuits andservice manual. Only qualified personnel should work inside the equipment. WARNING WARNING Turn off the power at the mains switch-board before beginning the installation. Fire, electrical shock or serious injury canresul...
Page 6 - iv; FORWORD
iv FORWORD Congratulations on your choice of the FURUNO NX-700A/B NAVTEX Receiver. We are confident that you will enjoy many years of operation with this fine piece of equipment. For over 50 years, Furuno Electric Company has enjoyed an enviable reputation for quality and reliability throughout the ...
Page 7 - Features; The FURUNO NX-700 NAVTEX receiver receives NAVTEX messages and
v Features NAVTEX (Navigational Telex) is a world wide coastal telex broadcasting system. Coastal NAVTEX broadcasting stations with specific ID’s transmit Navigational warnings. Meteorological warnings, Search and Rescue (SAR) information and other navigational information for NAVTEX receiver-equipp...
Page 8 - TABLE OF CONTENTS
vi TABLE OF CONTENTS EQUIPMENT LISTS ........................................................................................... viii SYSTEM CONFIGURATIONS .............................................................................. x 1. PRINCIPLE OF NAVTEX SYSTEM ....................................
Page 9 - vii
vii MENU TREE.................................................................................................... AP-1 SPECIFICATIONS ........................................................................................... SP-1 PACKING LISTS ..........................................................
Page 10 - viii; EQUIPMENT LISTS; Standard Supply; Name Type
viii EQUIPMENT LISTS Standard Supply Name Type Code No. Qty Remarks NX-700A - w/printer Display Unit NX-700B - 1 w/o printer Receiver Unit NX-7001 - 1 Antenna Unit NX-7H - 1 CP08-01810 000-040-180 10 m cable, CP08-01811* CP08-01820 000-040-210 20 m cable, CP08-01811* CP08-01870 000-040-350 30 m cabl...
Page 12 - SYSTEM CONFIGURATIONS
x SYSTEM CONFIGURATIONS Power supply12-24 VDC DISPLAY UNIT NX-700B Rectifier PR-240-CE : Standard : Option : User supply DISPLAY UNIT NX-700A RECEIVER UNIT NX-7001 Power supply100-115/200-230 VAC.1 , 50/60 Hz External Alarm INS (Integrated Navigation System) or Navigator or ANTENNA UNIT NX-7H Max. 1...
Page 13 - PRINCIPLE OF NAVTEX SYSTEM; How NAVTEX Works; and serial number automatically.; NAVTEX System Operation; and many stations exist in the same service coverage.
1-1 1. PRINCIPLE OF NAVTEX SYSTEM 1.1 How NAVTEX Works NAVTEX is an acronym meaning Navigational Telex, and as its name shows, it is a kind of narrow band radio teletype system for sending (by frequency shift keying) text messages expressed in a 7-unit code. The difference is that a NAVTEX transmitt...
Page 14 - Format; Character B2 indicates the type of message. “A” thru “Z”, as listed below.
1. PRINCIPLE OF NAVTEX SYSTEM 1-2 1.3 Message Format For automatic identification of messages, each message starts with nine control characters, called “Header codes”. The first five characters are always “ZCZC_“ and common to all messages. This part is used for message synchronization. The latter f...
Page 15 - NAVTEX Station Map
1. PRINCIPLE OF NAVTEX SYSTEM 1-3 1.4 NAVTEX Station Map
Page 16 - NAVTEX Station List
1. PRINCIPLE OF NAVTEX SYSTEM 1-4 1.5 NAVTEX Station List NAV area Country Station Latitude Longitude Freq. (kHz) Area (nm) Station ID Broadcast schedule (UTC) I Belgium Oostende 51 11 N 02 48 E 518 55 T 0310, 0710, 1110, 1510, 1910, 2310 Estonia Tallinn 59 30 N 24 30 E 518 250 U 0320, 0720, 1120, 1...
Page 21 - OPERATION; Controls; Display unit, front view; Turning the Unit On/Off
2-1 2. OPERATION 2.1 Operating Controls ENT MENU ESC DIM LIST PRINT Turns the power on/off. Opens the PRINT options. Opens the LIST options. Opens menu/Returns to the previous display. Cursor pad-Shifts the cursor and display.-Selects items on menus. Adjusts the panel and LCD dimmer.+: Raises the se...
Page 22 - Adjusting LCD Dimmer
2. OPERATION 2-2 At the default setting, the equipment functions as below; When the results of the check are OK, ALL MESSAGE display for 518 kHz appears. This screen shows all messages received in 518 kHz. You can switch 518 kHz (International message) and 490 kHz (local message) to display. The NX-...
Page 23 - Confirming the New Message; Other messages
2. OPERATION 2-3 2.4 Confirming the New Message When you receive a new message, do one of the following depending on message received. SAR (Search and Rescue) message 1. When an SAR message is received, the audible alert sounds and details for the SAR message appear. Icon for SAR message 2. Press an...
Page 24 - Messages; Message list Detailed message
2. OPERATION 2-4 2.5 Sample Messages Press ▲ or ▼ on the cursor pad to choose a message, and then press the ENT key to show the detailed information for that message. The message list and detailed message displays can be switched by pressing the ENT key. ENT key Frequency (paragraph 2.9) Status icon...
Page 25 - Choosing the Receive Mode; Menu; NAVTEX; Manual
2. OPERATION 2-5 2.6 Choosing the Receive Mode The NAVTEX menu allows you to select what station to receive, automatically, manually. The Auto mode requires navigation data, and stations are automatically selected according to the distance between own ship and NAVTEX stations. If navigation data is ...
Page 26 - Choosing the Local Frequency; Local channel options; Editing the Settings for Station and Message
2. OPERATION 2-6 2.7 Choosing the Local Frequency You can choose 490 kHz or 4209.5 kHz as the local frequency. This function is only available for the Auto and Manual modes. (See paragraph 2.6.) 1. Press the MENU/ESC key to show the main menu. 2. Press ▲ or ▼ to choose NAVTEX, and then press the ENT...
Page 27 - Message; Message
2. OPERATION 2-7 3. Press ▲ or ▼ to choose “Rcv Station & Msg” or “User Select Station & Msg”. 4. Press the ENT key to open the appropriate editing window. (Below is the Rcv Station & Msg editing window.) Rcv Station & Msg [Auto] [518] Station ABCDEFGHIJKLMNOPQRSTUVWXYZ Message ABCDE...
Page 28 - Switching the Frequency to Display; or; Press any key (except
2. OPERATION 2-8 2.9 Switching the Frequency to Display With showing the message list, you can switch the frequency to 518 kHz or 490 (or 4209.5) kHz by pressing ◄ or ► key. 518 490 (4209) Press Switching the frequency to display 2.10 Alarm Messages The sequence of events when an alarm message is re...
Page 29 - Choosing messages to display; key to; List options; User Selected Messages:; key to close the window.
2. OPERATION 2-9 2.11 Processing Messages Choosing messages to display You can choose which category of messages to display: All, Alarm, User Selected and Good messages. 1. With the message list or detailed message shown, press the LIST key to show the list options. All Messages Alarm MessagesUser M...
Page 30 - Protecting message from deleting; Printing all messages displayed; Print
2. OPERATION 2-10 Protecting message from deleting Messages are automatically deleted from the memory under the following conditions. -66 hours passed from the moment when received. -Older than No. 200 To prevent a message from being deleted, do the follows; 1. Choose the message at the list display...
Page 32 - Editing the NAVTEX Station List; Service; Edit station list display
2. OPERATION 2-12 2.13 Editing the NAVTEX Station List Maximum 300 NAVTEX stations can be registered into the memory. Note: To cancel editing of a NAVTEX station, press the MENU/ESC key. The message “Exit without saving?” appears. Choose “Yes”, and then press ENT key. Adding NAVTEX station You may a...
Page 35 - to choose “Yes”, and then press the; key to close the edit
2. OPERATION 2-15 Edit Delete 7. Press ▲ or ▼ to choose Delete, and then press the ENT key. The message “Delete station?” appears. 8. Press ◄ to choose “Yes”, and then press the ENT key to close the edit window. 9. Press the MENU/ESC key several times to close the menu. 2.14 Icons The NX-700 shows v...
Page 36 - List; Message Meaning Remedy
2. OPERATION 2-16 2.15 Messages List In addition to the message “Received new local (int’l) msg.” the following message-related messages may appear on the display. Message Meaning Remedy New message received. Oldest message deleted to free up memory. Appears when the oldest message is deleted to mak...
Page 37 - Functions; NAVTEX menu
2. OPERATION 2-17 2.16 Other Functions This paragraph describes the various options which allow you to set up your unit to suit your needs. NAVTEX menu Item Description Setting Receive Mode Chooses the receiving mode. (See paragraph 2.6.) INS, Auto, Manual Local Channel Chooses the local channel. 49...
Page 38 - Distance
2. OPERATION 2-18 Display menu Item Description Setting Scrolling Selects the speed of scrolling by pressing ▲ or ▼ . Slow: Scrolls by one line. Fast: Scrolls by half of screen. Skips to $$: Scrolls line by line in list display; Skips to $$ position in detailed display. Slow, Fast, Skip to $$ Font S...
Page 40 - This page is intentionally left be blank.
2. OPERATION 2-20 This page is intentionally left be blank.
Page 41 - TROUBLESHOOTING; Maintenance program
3-1 3. MAINTENANCE & TROUBLESHOOTING This chapter provides information necessary for keeping your unit in good working order and remedying simple problems. WARNING WARNING Do not open the equipment. Hazardous voltage which cancause electrical shock existsinside the equipment. Only qualified pers...
Page 42 - Fuse; Battery; LCD Display
3. MAINTENANCE & TROUBLESHOOTING 3-2 3.2 Replacement of Fuse, Battery and Thermal Paper Fuse The fuse inside the receiver unit protects the equipment from overcurrent or reverse polarity. If the fuse blows, contact your dealer about replacement. Name Type Code No. Fuse FGMB 125V 2A PBF 000-157-4...
Page 43 - Thermal paper; Peel the tape from the end of new paper.
3. MAINTENANCE & TROUBLESHOOTING 3-3 Thermal paper (NX-700A only) When the thermal paper runs out completely, the message “Printer error” (center of screen) and the X icon (at the right-hand top corner) appear. Replace the paper as follows. Name Type Code No. Thermal paper TP058-30CL 000-154-047...
Page 45 - Memory test
3. MAINTENANCE & TROUBLESHOOTING 3-5 3.4 Diagnostics The memory test checks ROM, RAM, data port, battery, keyboard and LCD for proper operation and displays program version numbers. 1. Press the MENU/ESC key to open the main menu. 2. Press ▼ to choose Service, and then press the ENT key. 3. Pres...
Page 46 - Rx test; Restoring all Default Settings
3. MAINTENANCE & TROUBLESHOOTING 3-6 8. When the message “Hit any key” appears on the screen, press any key (except key) to show the Rx test screen. The alarm for receiving monitor sounds while the Rx test is being conducted. Also the test message is printed when the item other than “None” at Pr...
Page 47 - Unit; Locate the unit away from exhaust pipes and vents.; Tabletop, overhead mounting
4-1 4. INSTALLATION 4.1 Display Unit The display unit can be installed on a tabletop, on the overhead, or in a panel. Refer to the outline drawings at the back of this manual for installation instructions. When selecting a mounting location, keep in mind the following points. • Locate the unit away ...
Page 48 - Flush mounting
4. INSTALLATION 4-2 Flush mounting The display unit can be installed flush mounted in a console or panel by using the optional flush mount kit. (For NX-700A) Type: OP08-19 Code No.: 004-515-260 Name Type Code No. Qty Remarks Mounting metal 08-023-1019 100-326-960 1 Self-tapping screw 5X20 000-802-08...
Page 49 - General mounting considerations
4. INSTALLATION 4-3 4.2 Receiver Unit General mounting considerations • The mounting location should be well ventilated and dry. • The unit can be mounted on bulkhead or the desk. • Secure the maintenance space shown in drawing at the back of this manual for ease of maintenance and service. • Compas...
Page 50 - Mounting considerations; Do not shorten the antenna cable.
4. INSTALLATION 4-4 4.3 Antenna Unit Mounting considerations Install the antenna unit referring to the antenna installation diagram at the back of this manual. W hen selecting a mounting location for the antenna unit, keep in mind the following points: • Do not shorten the antenna cable. • Do not in...
Page 51 - Prepare the printer by locally as shown below for the NX-700B.
4. INSTALLATION 4-5 4.4 Printer (NX-700B only) Prepare the printer by locally as shown below for the NX-700B. -8 bit parallel Centronics interface, or serial RS-232C -Serial printer -Baud Rate: 9600 bps -Character length: 8 bit -Parity: No -Flow control: Xon/Xoff -32 characters/line or more 4.5 Wiri...
Page 52 - Receiver unit; Receiver unit, inside view
4. INSTALLATION 4-6 Receiver unit All cables are gathered to the receiver unit. Connect cables at inside of the receiver unit as shown below. DSUB25P-DSUB25P-3M cable(to Display unit) DPYC-2.5 (to ship's battery) RCV Board08P3227 TTYCS-1Q(to Navigatoror INS ) DPYC-1.5(to External alarm) Printer cabl...
Page 54 - Antenna cable; sleeve to conductor.
4. INSTALLATION 4-8 Antenna cable Be sure to leave some slack in the cable for future service and maintenance. For RG-10/UY, RG-214 cable When using the coaxial cable, type RG-10/UY or RG-214, attach the FM-MP-7 connector (supplied as installation material) or PL-259 (local supply) as below. 1. Remo...
Page 56 - Setting of Printer; Warn Msg Alm
4. INSTALLATION 4-10 4.6 Setting of Printer After the connection completely, the setting of printer should be done for NX-700B as shown below. (For NX-700A, use the default setting as is.) 1. Press the key to turn the power on. 2. Press the MENU key to show the main menu. Menu NAVTEX SystemDisplaySe...
Page 57 - Interfacing; Priority
4. INSTALLATION 4-11 4.7 Digital Interfacing This equipment can receive navigation data in IEC 61162-1 Ed2/2 format. Priority TIME ＆ DATE ZDA L/L GNS > GGA > RMC > GLL SOG VTG > VBW > RMC STW VHW > VBW COG VTG > RMC Input data sentence description GGA: GPS position fixing condit...
Page 58 - GLL: Latitude and longitude
4. INSTALLATION 4-12 GLL: Latitude and longitude $--GLL,llll.lll,a,yyyyy.yyy,a,hhmmss.ss,A,a*hh<CR><LF> | | | | | | | | | | | | | | | +------- 6 | | | | | | +--------- 5 | | | | | +----------- 4 | | | | +---------------- 3 | | +------+----------------------- 2 +---+----------------------...
Page 59 - RMC: Recommend Minimum Specific GNSS Data
4. INSTALLATION 4-13 RMC: Recommend Minimum Specific GNSS Data $--RMC,hhmmss.ss,A,llll.lll,a,yyyyy.yyy,a,x.x,x.x,xxxxxx,x.x,a,a*hh<CR><LF> | | | | | | | | | | | | | | | | | | | | | | | | | +--- 10 | | | | | | | | | | | +----- 9 | | | | | | | | | +--+------- 8 | | | | | | | | +-----------...
Page 66 - Serial Interface
4. INSTALLATION 4-20 ALR: Set alarms $NXALR,hhmmss.ss,xxx,A,A,c--c*hh<CR><LF> | | | | | | | | | | | +----------------- 6 | | | | +----------------- 5 | | | +-------------------- 4 | | +---------------------- 3 | +------------------------- 2 +--------------------------------- 1 1. Time of...
Page 67 - MENU TREE
AP-1 MENU TREE MENU/ESC Key Receive Mode (INS, Auto , Manual) Local Channel ( 490kHz , 4209.5kHz) Auto Print (Off, All , User Select) Rcv Station & Msg User Select Station & Msg NAVTEX Warn Msg Alm ( Off , On) Signal Monitor ( Off , Int’l, Local) Key Beep (Off, On ) Time Offset (-13:30 to +1...
Page 68 - FURUNO; SPECIFICATIONS OF NAVTEX RECEIVER; NAVTEX
FURUNO NX-700A/B SP - 1 E5649S01D-M SPECIFICATIONS OF NAVTEX RECEIVER NX-700A/B 1 NAVTEX RECEIVER 1.1 Receiving frequency 518 kHz and 490 kHz (or 4209.5 kHz), receive both frequencies simultaneously 1.2 Mode of reception F1B 1.3 Sensitivity 2 μ V e.m.f. (50 ohms), 4% error rate or less 1.4 Input pro...
Page 70 - PACKING LIST
ＰＡＣＫＩＮＧ ＬＩＳＴ 08AW‑X‑9862 ‑3 NX‑700A/NX‑700A‑HK/NX‑700A‑R N A M E O U T L I N E DESCRIPTION/CODE № Q'TY 1/1 ユニット UNIT 指示部 DISPLAY UNIT NX‑700‑A/‑HK/‑R 000‑040‑342 1 ** 付属品 ACCESSORIES FP08‑00800 感熱記録紙 RECORDING PAPER TP058‑30CL 000‑154‑047 1 工事材料 INSTALLATION MATERIALS 工事材料 INSTALLATION MATERIALS CP...
Page 75 - 工事材料表
CODE NO. 004‑514‑350 TYPE CP08‑01861 略 図 OUTLINE 名 称 NAME 数量 Q'TY 用途／備考 REMARKS 番 号 NO. 型名／規格 DESCRIPTIONS 1/1 ‑0 INSTALLATION MATERIALS 工事材料表 08AW‑X‑9401 +ﾄﾗｽﾀｯﾋﾟﾝﾈｼﾞ 1種 SELF‑TAPPING SCREW 5X20 SUS304 4 000‑802‑081 1 CODE NO. （略図の寸法は、参考値です。 DIMENSIONS IN DRAWING FOR REFERENCE ONLY.） ＦＵＲＵＮＯ ＥＬ...
Page 88 - INDEX
IN-1 INDEX A Alarm message ............................................. 2-9 C Contrast ...................................................... 2-18 D Date............................................................ 2-21 Default Settings ............................................ 3-6 Diagnostics .....
Page 89 - Declaration of c o n f o r m i t y
FURUNO ELECTRIC CO., LTD. 9-52 Ashihara-Cho, Nishinomiya City, 662-8580, Hyogo, JapanTel: +81 798-65-2111 Fax: +81 798-65-4200 Pub NO. DOC-891 Declaration of c o n f o r m i t y We FURUNO ELECTRIC CO., LTD. ---------------------------------------------------------------------------------------------...
