Furuno FEA-2100 - Manual
Furuno FEA-2100 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Loading the catalogue chart to be updated from CD-ROM to ECDIS; Place the cursor on the [Load] button and press; Check box
- Page 3 – OK
- Page 4 – Displaying the Catalogue Chart; catalogue name entered at step 5 in the
- Page 8 – Hourglass
- Page 9 – Chart cell number
1
ECDIS
FEA-2100/2105
ENC Chart (Japan Maritime Safety Agency
）
Update Manual
・
Update chart before embarking on a voyage. Do not update charts during a voyage.
・
During updating, do not display the radar overlay screen or the route monitor screen.
Hangup may result. If hangup occurs, turn the power off and on again.
・
It takes about seven hours to update one zone. Plan accordingly.
Trackball
[SELECT] key
[CHART PLAN] key
ECDIS Keyboard
1. Preparation
1. Press the [CHART PLAN] key.
The menu appears in the Information area at the
right side of the screen.
2. Rotate the trackball to place the cursor (arrow
mark) on [SENC Convert Settings] and press the
[SELECT] key.
The [SENC Convert Settings] window appears.
[SENC Convent Settings]
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 3. Check the box on [Automatic SENC conversion] and [Automatic Display Unit]. (Or confirm that the check marks are displayed.) To check the box, place the cursor on the box and press the [SELECT] key. 4. Place the cursor on the [Close] button and press the [SELECT] key to close the windows. 2. Loa...
3 5. Place the cursor on an alphabet or number button and press the [SELECT] key. Repeat this to enter catalogue name. Set a name which is easy to understand. For example, if the issue date of the CD is March 11, 2003, name it as JP20030311. You can switch between lower case and upper case by placin...
4 3. Displaying the Catalogue Chart 1. Press the [CHART PLAN] key to display the menu. 2. Place the cursor on the [Catalogue] and press the [SELECT] key. 3. Check on the [Name] and [Catalogue charts] check boxes and select [CD] in the [View filters] window. 4. Place the cursor on the down arr...
