Furuno 2100 - Manual
Furuno 2100 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Loading the catalogue chart to be updated from CD-ROM to ECDIS; W hen the catalogue is loaded, the catalogue; Check box
- Page 3 – OK
- Page 4 – Displaying the Catalogue Chart; Choose catalogue name.
- Page 8 – Hourglass
- Page 9 – Chart cell number
1
ECDIS
FEA-2100/2105
C-MAP Chart Update Manual
・
Update chart before embarking on a voyage. Do not update charts during a voyage.
・
During updating, do not display the radar overlay screen or the route monitor screen.
Hangup may result. If hangup occurs, turn the power off and on again.
・
It takes about seven hours to update one zone. Plan accordingly.
Trackball
[SELECT] key
[CHART PLAN] key
ECDIS Keyboard
1. Preparation
1. Press the [CHART PLAN] key.
The menu appears in the Information area at the
right side of the screen.
2. Rotate the trackball to place the cursor (arrow
mark) on [SENC Convert Settings] and press the
[SELECT] key.
The [SENC Convert Settings] window appears.
[SENC Convent Settings]
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 3. Check the box on [Automatic SENC conversion] and [Automatic Display Unit]. (Or confirm that the check marks are displayed.) To check the box, place the cursor on the box and press the [SELECT] key. 4. Place the cursor on the [Close] button and press the [SELECT] key to close the windows. ...
3 The catalogue name [CM93PROF3] is shown. 5. Place the cursor on the [OK] button and press the [SELECT] key. Note: If the catalogue name is the same as an existing one you named previously, the following message appears. To overwrite the name, place the cursor on the [Yes] button and press the [S...
4 3. Displaying the Catalogue Chart 1. Press the [CHART PLAN] key to display the menu. 2. Place the cursor on the [Catalogue] and press the [SELECT] key. 3. Check on the [Name] and [Catalogue charts] check boxes and select [CD] in the [View filters] window. 4. Place the cursor on the down a...
