Fujitsu PDS4212W-H - Manual

E-4 FEATURES This display has a plasma display panel and is only 8.5 cm deep. With its high image quality and performance, it is perfectly suited tomultimedia applications. Can receive a variety of input signals • In addition to video, S-video, and RGB1 (mD-sub Connector), RGB2 (BNC x 5 connector) s...

E-5 English HOW TO USE ACCESSORIES Cable clampers Use the supplied cable clampers to bind the display’s signal or power cables. Use them as shown in the figure when mounting the displayon the wall, using the wall-mounting unit, or hanging it from the ceiling using the hanging unit. ACCESSORIES Infor...

E-6 HANDY TIPS • Images may become “burnt” into the screen phosphors if the screen is left on for extended periods. To ensure that the display has a prolonged service life, be sure to use a screen saver. This will ensure the same image or pattern is not constantly displayed for longperiods. (See P. ...

E-7 English INSTALLATION To prevent the display’s internal components from overheating, make sure that the display is installed in a well-ventilated location. Be sure to use the (optionally available) stand, wall-mounting unit or the other unit when installing the display. Also, be also sure thatyou...

E-8 SAFETY MEASURES To prevent accident and ensure safety in the event of an earthquake, fix the display securely into position as described below. FIXING THE DISPLAY TO A WALL OR PILLAR FIXING THE DISPLAY TO THE STAND You need two strong cords. Attach a bracket to each hole at the rear of the displ...

E-9 English PART NAMES AND FUNCTIONS Power button [POWER] Turns the power ON or OFF when the main power switch,provided at the bottom of the display, is ON. Input mode selector button [MODE] Switches between image input modes. Wide screen selector button [WIDE] Switches the screen over to a desired ...

E-10 Main power switch Press this switch when the power is OFF to turn it ON. When you do so, the power indicator lamp will become red, indicating thatyou can turn ON or OFF the power to the display using either the remote control or the display’s control panel. Press this switch when the power is O...

E-11 English Video input terminal (VIDEO INPUT) Connect this terminal to the video output terminal of your VCR or video disk player. Sound2 input terminal (AUDIO2 INPUT) Connect this terminal to the sound output terminal of your VCR, etc. External speaker output terminal (EXT SP) Connect this termin...

E-12 PART NAMES AND FUNCTIONS (Continued) Note The remote control will not function properly if the batteries are dead. Be sure to replace them as needed. Make sure that you use replace the batteries with new ones; also, be sure to use replacement batteries of the same type as the original ones. Pow...

E-13 English PRECAUTIONS To prevent malfunction, be sure not to apply any form of severe shock to the remote control. To prevent malfunction or deformation, be sure not to allow the remote control to become wet; also, keep it away from hot locations orheating equipment. Be sure not to clean the remo...

E-14 Be sure to turn OFF the power to the display and external equipment before making any connections. No cables are supplied with the display for connection to external equipment. The type of cable to be used varies depending on the PCmodel. Contact your dealer for more information. RECEPTACLE Mak...

E-16 Press the main power switch atthe bottom of the display. When you do so, the main power turns ON andthe power indicator lamp turns red. Press on the remote control. When you do so, the power indicator lamp turnsgreen. Press or to select a desired input mode. BASIC OPERATIONS 1 2 3 * You can als...

E-17 English SELECTING INPUT MODE Press to select a desired input mode. Each time you press , a different input mode appears. The sequence is as follows: Video: Displays images from equipmentconnected to the Video terminal. S-video: Displays images from equipmentconnected to the S-video terminal. Co...

E-18 WATCHING IMAGES ON THE WIDE SCREEN Information • You cannot select Auto mode when you are in Comp.video mode (video input mode). • You may not be able to watch images clearly in Auto mode, depending on the contents of the image software you use. If you experience problems, use to switch to a mo...

E-19 English Information You may find dark areas on top and at the bottom of the screen if you select one of the Zoom modes for media while using the Vista Vision or CinemaVision size i.e., the sizes used frequently for image software. Normal Displays images of normal size (i.e., a 4:3 aspect ratio)...

E-20 HOW TO USE MENUS 1 2 3 SELECTING OPTIONS IN A MENU Use the [MODE] button on the display or and on the remote control to select a desired input mode. Press . The main menu screen will appear. Press or to switch between subordinate menus. Each time you press or , one of the available menus appear...

E-21 English PICTURE Menu screen (Video Input Mode) PICTURE Menu screen (RGB Input Mode) USING THE PICUTURE MENU When you finish selecting a desired option in the PICTURE menu screen, press or . At this time, the adjustment/setup screen for that option will appear. You can use or to change the value...

E-22 HOW TO USE MENUS (Continued) USING THE POSITION/SIZE MENU When you finish selecting a desired option in the POSITION/SIZE menu screen, press or . When you do so, the adjustment screen for that option appears. You can use or , , and to change the value for the option. (See P. E-28–E-29.) Changes...

E-23 English USING THE SOUND MENU When you finish selecting a desired option in the SOUND menu screen, use or to change the value for that option. (See P. E-30–E-31.) Changes you make will be stored only for the selected mode. Option (1) Treble (2) Bass (3) Balance (4) Speaker Function Adjusts trebl...

E-24 Option (1) OSD (2) Language (3) Monitor No. (4) Video mode(for Video, S-video) (5) Vertical sync(for Comp.video, RGB1, RGB2) (6) Clamp pulse(for Comp.video, RGB1, RGB2) (7) AGC(for Video, S-video, Comp.video) (8) Bluish white(for Video, S-video) (9) Status (10) Extended menu Function Selects wh...

E-25 English Extended menu screen (Video Input Mode) Extended menu screen (RGB Input Mode) Option (1) OSD rotate (2) DPMS (3) White screen (4) Screen saver (5) Input priority (6) Audio Input (7) 3D Y/C(for Video (3.58NTSC)) (8) Studio mode (9) White peak level calibration(for RGB1, RGB2) (10) Sharpn...

E-33 English Setting Display Information (OSD) All modes You can use this option to select whether to display information other than menus.(Error messages are displayed regardless of what choice you make for this option.) Each time you press or , one of the available choices appears in the following...

E-34 OTHER ADJUSTMENTS (OTHERS MENU) (Continued) Eliminating Flicker (Vertical sync) Corrects the vertical synchronization signal timing to eliminate vertical flicker. Use or to specify a value between -2 and +1. Adjusting Clamp Pulse (Clamp pulse) Adjusts clamp pulse in accordance with the input si...

E-36 ADJUSTMENTS RELATED TO YOUR PC When images are brighter (darker) with a new PC • Adjusting brightness (White peak level calibration) Select the optimum dynamic range for images. To do this, you need to create a totally white screen [input 255 to each of R, G, and B] using the PC’s paint program...

E-37 English • Frequency scanning (Freq. scan) You can use this option to perform automatic frequency scanning to ensure optimum image quality. Each time you press or , one of the available choices appears in the following sequence: Auto Fix Auto: Performs automatic frequency scanning at all times f...

E-38 • Minimizing phosphor burn-in (Screen saver) All modes You can use this option to move the screen position to minimize phosphor-induced “burning”. Follow the steps below. Select “Screen saver” and press or . The “Screen saver” setting screen will appear. Press or to select “Function”. Select a ...

E-39 English When rotating text (for installing the display with one of its sidesfacing down) • Rotating text (OSD rotate) All modes You can use this option to rotate the text. Each time you press or , one of the available choices appears in the following sequence: -90 Deg.: Displays text from left ...

E-40 OPTIONS Wall-mounting unit Vertical: 0 ° to 5 ° mounting angle P-42WB11 (for both vertical and horizontal) Horizontal: 0 ° to 15 ° mounting angle Hanging unit 0 ° to 15 ° mounting angle (variable) P-42CT11 Stand P-42TT11 Speaker P-42SP11(1 set of 2 speakers) Speaker stand P-42ST11(1 set of 2 sp...

E-41 English FACTORY SETTINGS This display can store parameter settings for eight additional signals for both RGB1 and RGB2. To do this, select a desired signal and follow the instructions in “Adjusting Screen Position and Size” on P. E-28–E-29 to adjust theparameters. When you finish, the settings ...

E-42 Model PDS4211W-H/PDS4212W-H Screen size 42" wide screen (92.0 cm (W) x 51.8 cm (H) x 105.6 cm (Diagonal)) Aspect ratio 16:9 (wide) Weight 31.5 kg Outer dimensions 103.5 (W) x 64.0 (H) x 8.5 (D) cm Power supply 100 –240 VAC 50/60 Hz Power consumption 3.9 A Screen dimensions 92.0 (W) x 51.8 (...

E-44 CLEANING AND MAINTENANCE Precautions Be sure to remove the power plug from the receptacle beforecleaning the display. Be sure not to clean the display using a cloth dampened withvolatile solvents, such as benzene or thinner. Such solvents canharm the display’s cabinet, the filter at the screen ...