Fujitsu P42HHA30A - Manual

E-6 INSTALLATION To prevent the display’s internal components from overheating, make sure that the display is installed in a well-ventilated location. Be sure to use the optional desktop stand, ceiling-mounting unit, wall-mounting unit and other unit when installing this display. Also, besure that y...

English E-7 Wall-mounting Bracket 0° to 15° mounting angle P-WB6300 (for 63”/55”)P-WB4201 (for 50”/42”) Ceiling-mounting unit 0° to 15° mounting angle P-CT6300 (for 63”/55”)P-CT4200 (for 50”/42”) Desktop Stand unit P-TT6300 (for 63”/55”)P-TT4200 (for 50”/42”) Speaker P-SP6300 (for 63”/55”)P-SP5000 (...

E-8 MAIN SUPPORTED SIGNALS This display can store the latest four types of signals for RGB adjustment value. The fifth input signal will replace the adjustment valueof the first input signal. To do this, select a desired signal and follow the instructions in “Adjusting Screen Position and Size” on t...

English E-9 SPECIFICATION Model P63XHA30W/A Screen size 63" wide screen:139.3 cm (W) x 78.3 cm (H) (159.8 cm diagonal)54.8 inch (W) x 30.8 inch (H) (62.9 inch diagonal) Aspect ratio 16:9 (wide) Weight 72 kg / 159 lbs Outer dimensions 150.6 (W) x 89.6 (H) x 12.3 (D) cm59.3 (W) x 35.3 (H) x 4.8 (D...

Before using the display, read the User’s manual (1/2) and the User’s manual (2/2) carefully so that you know how to use the display correctly. Refer to these manuals whenever questions or problems about operation arise. Be sure to read and observe the safety precautions. Keep these manuals where th...

E-2 SAFETY PRECAUTIONS IMPORTANT INFORMATION WARNING: This is a Class A and Class B product. In a domestic environment this product may cause radiointerference in which case the user may be required to take adequate measures. WARNING: TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS...

E-4 RECEPTACLE Make sure that the power cable’s grounding wire is grounded. The display comes with a 3-prong power plug; one prong is connected to the grounding wire. If you have only a 2-hole receptacle, youwill need to have it replaced. Contact your dealer for more information. • Have the display ...

E-5 English CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT EXAMPLE OF CONNECTION TO EXTERNAL COMPONENTS Remotecontrol Display Speaker (optional) Speaker VCR or other external components See P. VCR DVD player Satellite tuner PC Be sure to turn OFF the power to the display and external equipment before ...

E-6 CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT (Continued) VCR • Connect the video signal cable to either the S-video input terminal or the video input terminal. To video output To video input Bottom of Display Note • Unplug the power cord from the AC outlet before you connect external components....

English E-7 SATELLITE TUNER • Connect the video signal cable to the component video input terminal, S-video input terminal, or the video input terminal.• If the component to be connected is equipped with component video output terminal, it is recommended to connect to the component video terminal. D...

E-8 PC • As the cable for connecting a PC differs with the PC model, please consult your dealer for information on the right cable to purchase.• The PC can be connected to either the front side or the rear side, whichever is most convenient. To RGB output (mD-sub) To audio output To RGB output (DVI-...

E-9 English USING THE REMOTE CONTROL 1 button Switches between power ON and standbystate. 3 DISPLAY OFF button For showing on-screen-information. 4 PICTURE MODE button Switches the picture mode. 7 RGB input mode selector button[RGB 1 – 2] Selects RGB 1 – 2. 9 Video input mode selector button[VIDEO 1...

E-10 USING THE REMOTE CONTROL (Continued) PUTTING BATTERIES IN THE REMOTE CONTROL 1 To remove the cover, slide itoutwards while pressing it down. 2 Place two AA batteries in theremote control. Make sure that thebatteries are properly oriented. 3 Close the cover until it snaps intoplace. Note The rem...

E-11 English EFFECTIVE RANGE FOR THE REMOTE CONTROL Point the remote control at the display’s signal receiver when using it. Make sure that there are no obstacles between the remote control and the display’s signal receiver. Information The remote control may not function properly if you use a high-...

E-12 BASIC OPERATIONS * You can also use the buttons on the display’s controlpanel to perform these steps. TURNING THE POWER ON AND OFF 1 2 3 Press /I to the left at the bottomof the display to the ON state. The power lamp lights up. Press on the remote control. The color of the power lamp changes f...

E-13 English Press the Volume button Press to increase the volume. Press to reduce the volume. * Note that the volume level remains stored even when you turn OFF the power. Muting the audio Press . The audio is removed. Press again to restore the audio to the original level. The mute mode can also b...

E-14 SELECTING INPUT MODE RGB INPUT MODE 1 RGB1 mode Press the – buttons to select the input mode. You can select from VIDEO1 mode to VIDEO4mode. The video modes corresponding to each inputterminal are as follows. • VIDEO1: Video • VIDEO2: S-video • VIDEO3: Component video • VIDEO4: Component video ...

English E-15 CONVENIENT FUNCTIONS OTHER BASIC OPERATIONS On-screen information (DISPLAY) Press . The mode is indicated on the screen for 5 seconds. Picture Mode (PICTURE MODE) Press . This button can be used to switch the picture mode. In the picture mode, you can switch between the set status and t...

E-16 WATCHING PICTURES ON THE WIDE SCREEN Note • Displaying a picture in a Normal mode for extended periods of time may cause phosphor burn-in. • A variety of picture modes are available with this display. Remember that if you select a mode with an aspect ratio (ratio of frame width to frame height)...

E-17 English Information You may find dark areas on top and at the bottom of the screen if you select one of the Zoom modes for media while using the Vista Vision or CinemaVision size i.e., the sizes used frequently for picture software. * Functions may not be available with some models and some dev...

E-18 ADJUSTMENT MENU ADJUSTMENT MENU MENU PICTURE POSITION/SIZE AUDIO FEATURES FACTORY DEFAULT Contrast Brightness Color Tint Sharpness Picture Mode PrecisionSetting Noise Reduction * Picture Memory Default Position Size Default Treble Bass Balance Loudness Adjustment Function On Screen Menu Input T...

English E-27 • FEATURES setup screen has the following 5 options. Adjustment : Can make a fine adjustment of pictures such as Dot Clock, Clamp Position. Function : Allows setting of 24-frame mode. (See P. E-28.) On Screen Menu : Can make a display setting such as OSD, Language. (See P. E-28.) Input ...

E-28 OTHER ADJUSTMENTS (FEATURES MENU) (Continued) • Setting Display Information (OSD) You can use this option to select whether to display information other than menus. (Error messagesare displayed regardless of what choice you make for this option.) Each time you press or , one of the available ch...

English E-29 * On-screen information disappears if you do not take any action for about 60 seconds. * Functions may not be available with some models and some device options. * The adjustment range varies with the display signal. You can adjust the display quality to the value you want within the ad...

E-30 OTHER ADJUSTMENTS (FEATURES MENU) (Continued) OTHER SETTINGS DPMS for other then RGB1 You can use this option to select the amount of time before the DPMS function starts. DPMS (which stands for “display power management signaling”) allows the display to maintain an automatic power saving funct...

English E-33 INITIALIZATION OF USER ADJUSTMENT VALUE (FACTORY DEFAULT) 1 “FACTORY DEFAULT” selected in themain menu screen Displays the message of whether toproceed the initialization Displays the message of havingcompleted the initialization You can restore the values of the adjustment/setting made...

E-34 Action • Check whether the power plug is securely inserted into the receptacle. • Check cables for disconnection.• Check whether the power for all input equipment is ON.• Check for connection to wrong terminals or for wrong input mode.• Check whether the input mode display is colored pink.Speci...