Fujitsu MB90485 - Manual
Fujitsu MB90485 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
1/1
CM44-10121-7ET1
Errata
This errata sheet is for MB90480/485 Series Hardware Manual Rev.7 (CM44-10121-7E)
F
2
MC-16LX
16-BIT MICROCONTROLLER
MB90480/485 Series
HARDWARE MANUAL
2008.8.15
Page Item
Description
507
24.1
"Table 24.1-1 Function of Pins" was corrected as indicated by the shading below.
(Error)
Pin Function
Additional
information
MD2,MD1
,MD0
Mode pin
Setting MD2=1, MD1=1, and MD0=0 to enter the serial
programming mode.
X0,X1 Oscillation
pin
As, in the serial programming mode, CPU internal operation clock
is the PLL clock multiplied-by-1, the internal operation clock
frequency is equal to the oscillation clock frequency. Consequently,
the frequencies that can be input to the high-speed oscillation input
pin for serial writing are from 4.5 MHz to 25 MHz.
(Correct)
Pin Function
Additional
information
MD2,MD1
,MD0
Mode pin
Setting MD2=1, MD1=1, and MD0=0 to enter the serial
programming mode.
X0,X1 Oscillation
pin
As, in the serial programming mode, CPU internal operation clock
is the PLL clock multiplied-by-1, the internal operation clock
frequency is equal to the oscillation clock frequency. Consequently,
the frequencies that can be input to the high-speed oscillation input
pin for serial writing are from 4 MHz to 25 MHz.
[mcu_doc0743]
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
