Page 5 - IMPORTANT NOTE TO USERS
IMPORTANT NOTE TO USERS READ CAREFULLY ALL OF THIS MANUAL BEFORE USING THIS PRODUCT.IF NOT USED CORRECTLY, UNEXPECTED DAMAGES MAY BE CAUSED TOTHE USERS OR THE BYSTANDERS. While all efforts have been made to ensure the accuracy of all information in thismanual, FUJITSU assumes no liability to any par...
Page 6 - Preface
Preface This manual explains how to clean and maintain the M3093DE/DG imagescanner. The M3093DE/DG is highly functional image scanner developed for volumefiling, using charge-coupled device (CCD) image sensors. This scannerfeatures duplex scanning and high quality image, processing with anautomatic ...
Page 7 - Conventions
Used for general WARNING and CAUTION. Be careful not to pinch your fingers or hands. Conventions Special information, such as warnings, cautions are indicated as follows: WARNINGWARNING indicates that personal injury may result if you do not follow aprocedure correctly. CAUTIONCAUTION indicates that...
Page 9 - CONTENTS
CHAPTER 1 DESCRIPTION ............................................................................. 1-1 Units ............................................................................................. 1-2 Assemblies ....................................................................................
Page 11 - CHAPTER; TROUBLESHOOTING
CHAPTER 5 CHAPTER 4 CHAPTER 3 CHAPTER 2 CHAPTER 1 DESCRIPTION TROUBLESHOOTING OPERATING INSTRUCTION CLEANING REPLACEMENT OF PARTS DESCRIPTION DESCRIPTION OPERATING INSTRUCTION CLEANING TROUBLESHOOTING REPLACEMENT OF PARTS
Page 13 - DESCRIPTION; Units
DESCRIPTION CHAPTER 1 1-1 This chapter describes units, assemblies, indicators and LEDfunctions. DESCRIPTION Units Assemblies Indicators
Page 15 - Function
DESCRIPTION No. Function Automatically feeds documents to the reading position. Opens/closes ADF to remove the jammed documents. Holds the documents to be fed by ADF. Indicate the status of the scanner. Stacks the read documents. Covers a document to be read. Presses a document to the document bed. ...
Page 16 - Assemblies
Assemblies 1-4 * *:Consumables **:Consumables These parts may not be provided in some countries because they are not compliant with safety regulations. Before ord ering the pick roller, contact your sales agent or Fujitsu service representative. Thumb screw **Pick roller(PA02212-K001) *Pad ASY(PA022...
Page 17 - Indicators; LED functions
DESCRIPTION Indicators LED Function Power Lights to indicate the power is on. Read Lights to indicate scanning is in progress. Check Lights if a device error occurs that may result in a service call.Blinks if a document is jammed in the ADF. Turns off when the jammeddocuments are removed from the AD...
Page 19 - OPERATING INSTRUCTION; Loading Document on the ADF
OPERATING INSTRUCTION 2-1 CHAPTER 2 OPERATING INSTRUCTION This chapter describes how to load document on the ADF andflatbed, how to load document larger than the document boardand how to read a page from a thick book. Loading Document on the ADF Loading Document on the Flatbed Loading Document Large...
Page 23 - Angle the document edges as follows:
OPERATING INSTRUCTION • Place the documents face down with the top to the left as shown in A. The long side is the top for landscape mode and the short side is the top for portrait mode.• Lift the documents holding the both ends with both hands.• Hold the documents tightly with your left hand and be...
Page 25 - Loading Document on the Flatbed; Open the document cover.
OPERATING INSTRUCTION Loading Document on the Flatbed ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Open the document cover. ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○...
Page 26 - Loading Document Larger than the Document Board
Loading Document Larger than the Document Board After the read operation, remove thedocument, re-attach the documentcover and close the documentcover. ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Place the document face-down onthe do...
Page 27 - Reading a Page from a Thick Book
OPERATING INSTRUCTION Reading a Page from a Thick Book ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Open the document cover. ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ...
Page 29 - CLEANING; Cleaning Supplies and Cleaning Area
CLEANING 3-1 3 CHAPTER CLEANING Cleaning Supplies and Cleaning Area Cleaning the ADF Cleaning the Flatbed This chapter describes the cleaning supplies and area, andhow to clean the ADF and flatbed.
Page 30 - Supplies
Cleaning paper Contact your Every 5,000 sheets dealer or Cleaner F2 distributer • Plastic rollers (*2) 1 bottle Apply Cleaner F2 to cotton swab. Cleaner F1 or • PAD ASY 1 bottle. Isopropyl alcohol Every 5,000 sheets Apply Cleaner F1 • Pick roller/Feed rollers/ to cloth. Glass/Sheet guide Every 5,000...
Page 31 - Area; Flatbed; Cleaning area
CLEANING 3-3 Cleaning paper with Cleaner F1 Dry cloth with Cleaner F1 Cotton swab with Cleaner F1 or F2 Area Name Flatbed ADF ADF Plastic rollers Document bed Document holding pad Cleaning area Document holding pad Document bed Pad Glass/Sheet guide Pick roller Plastic rollers Feed rollers Pick roll...
Page 32 - Repeat steps 1 through 5.; Cleaning the ADF; Cleaning the ADF with cleaning paper
rollers Plastic Cleaning paper ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Place the cleaning paper on theADF so that ...
Page 33 - Cleaning the ADF with Dry cloth with Cleaner F1; Lift up the ADF lever to open the ADF.
CLEANING Use a dry cloth or a cloth moistened with Cleaner F1 to softlyremove dirt and dust as follows. Cleaning the ADF with Dry cloth with Cleaner F1 Lift up the ADF lever to open the ADF. Pad Wipe the pad in the downward direction (indicated by the arrow). Be careful not to hook the pick spring w...
Page 35 - Close the ADF to lock the ADF lever.; Wipe the sheet
CLEANING 3-7 Close the ADF to lock the ADF lever. ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ N O T E If the sheet guide is dirty, the front image may includevertical stripes. Sheet guide (white part) Wipe the sheet guide. 3 Sheet g...
Page 36 - Cleaning the Plastic rollers with Cleaner F2
3-8 Lift up the ADF lever to openthe ADF. Moisten a cotton swab withCleaner F2. Wipe the Plastic rollersurfaces. Wipe the Plastic rollersurface with clean and drycloth. Allow to dry. Cleaning the Plastic rollers with Cleaner F2 1 2 3 4 Plastic rollers Plastic rollers
Page 37 - Cleaning the Flatbed with Dry cloth with Cleaner F1; Open the Document cover.; Cleaning the Flatbed; Apply Cleaner F1 to a clean cloth.
CLEANING 3-9 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Cleaning the Flatbed with Dry cloth with Cleaner F1 Open the Document cover. Wipe the document holding pad anddocument bed. Allow to dry. Cleaning the Flatbed N O T E Be sure ...
Page 38 - REPLACEMENT OF PARTS; Pad ASY or Pad
REPLACEMENT OF PARTS 4-1 This chapter describes how to replace the pad ASY, pad andpick roller. CHAPTER 4 REPLACEMENT OF PARTS Pad ASY or Pad Pick Roller
Page 41 - Pick Roller; Remove the two thumb screws.
Pick Roller 4-4 Lift up the ADF lever to open theADF. ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Remove the two thumb screws. N O T E The life span of the pick roller is about 200,000 sheets or one year.The life span may be decreas...
Page 42 - Remove the retaining spring.
REPLACEMENT OF PARTS 4-5 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Lift up the Guide A with both ofyour hands and disengage the tipfrom the right hole.Then lift the right side of the coverand remove it. Slide the pick roller to th...
Page 44 - Tighten the thumb screws.
REPLACEMENT OF PARTS 4-7 Attach the Guide A in the reversesequence of step 3 and align thescrew hole. ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Tighten the thumb screws. Close the ADF unit. 10 11 12 Guide A Thumb screws
Page 46 - Paper JAM
TROUBLESHOOTING TROUBLESHOOTING 5-1 5 CHAPTER TROUBLESHOOTING This chapter describes the paper JAM, initial checks and test modefor maintenance. Paper JAM Initial Checks Test Mode for Maintenance Problem Checklist
Page 47 - Lift the ADF lever to open the ADF.
Paper JAM ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Remove the documents fromthe ADF paper chute. 5-2 Close the ADF until the ADF lever locks. Lift the ADF lever to open the ADF. Remove the jammed document. 1 2 3 4 NOTE Inspect ...
Page 48 - Initial Checks; Press the power switch.; YES
TROUBLESHOOTING TROUBLESHOOTING Initial Checks If a problem occurs, check the following items before contacting manufacturer’s authorized service center. Symptom 1 The power does not go on. Power Contact manufacturer’s authorizedservice center. 5-3 Is the power cableconnected correctly? Connect the ...
Page 49 - Close the ADF completely.; Symptom
5-4 Are the documentsloaded on the ADFpaper chute correctly? Insert the first few pages intothe slot. Is the ADF closedcompletely? Close the ADF completely. Connect the interface cablescorrectly. YES NO NO YES NO YES Is the carrier fixingbracked placed inoperation position? Place the carrier fixingb...
Page 55 - Clean or replace the Pad ASY.
Symptom 7 Is the pick roller dirty? “Check” lamp blinks at 4 seconds intervals. NO YES Flatten the curl or use theflatbed to read the document. NO Check 5-10 Are documents underspecification?(See p5-11) YES YES Is the Pad ASY dirty orworn out? Clean or replace the Pad ASY. (See p3-4, p3-5, p4-2) Con...
Page 56 - NOTES
TROUBLESHOOTING TROUBLESHOOTING 5-11 NOTES • Do not mix different width documents. Read surface Less than5mm More than 30mm Top of the paper Feed direction Less than3mm More than 30mm Feed direction Top of the paper Read surface NOTE • Remove paper clips and staples. Flatten the staple holes. • Read...
Page 59 - Install it correctly.
NO Symptom 9 Miss pick occurs frequently. 5-14 Does the condition ofthe document satisfythe requirements onpage 5-11. Flatten the curl or use theflatbed to read the document. YES NO Is the heavy paper readwith the select lever set to“N”? Set the select lever to “T”.(See p2-3) YES Are the documentsfa...
Page 62 - Test Mode for Maintenance; Does the POWER lamp blinks?
TROUBLESHOOTING TROUBLESHOOTING Up Down Test Mode for Maintenance 5-17 Turn off the power. Open the ADF. Turn the power on after settingthe empty sensor and B5 sizesensor as shown in the figure. NO YES Does the POWER lamp blinks? Close the ADF cover.(The scanner is placed in the maintenance mode.) C...
Page 64 - Problem Checklist; General
TROUBLESHOOTING TROUBLESHOOTING Problem Checklist Before contacting the manufacture’s authorized service center, please fill in the following items. 5-19 General Transport error Image error Model Part number Serial number Manufactured data (Example) M3093DE (Example) CA02939-4202 (Example) 900002 (E...
