Fujitsu FTP-632MCL301 - Manual
Fujitsu FTP-632MCL301 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – DESIGNATION
- Page 4 – Mechanism with cutter
- Page 5 – Interface board; FUNCTION
NOT FOR NEW
DESIGN
FTP-632MCL301/302
■
OVERVIEW
FTP-632MCL/FTP-622DCL/DSL Series is an ultra high speed
line thermal printer driven by 24 VDC, printing on 3-inch wide
paper (80 mm/85 mm).
This printer is compact and light weight, and the design allows
easy head maintenance, head cleaning and head replacement.
This printer is suitable for a variety of applications, such as POS
terminals, ticket machines, coupon machines, label printers,
medical instruments, etc. A printer with a specially designed
cutter is also available.
■
HIGHLIGHTS
• Ultra high speed printing
It can print at 80 mm/s (640 dotlines/s) maximum by using
Fujitsu Components' unique head drive control.
• Compact and lightweight
This printer has a low profile of only 20 mm, and a light
weight of approximately 94 g.
• Low power consumption
The peak current for head driving is approximately 2.9 A (at
80 mm/s printing speed, 50% printing ratio).
• Easy head access
It is designed for easy head cleaning and head replacement.
• Paper auto loading function
T h e r m a l p a p e r c a n b e l o a d e d w i t h o u t h e a d - u p l e v e r
operation.
• ESC/POS
TM*1
Commands
The commands conform to ESC/POS
TM
.
• Auto Cutter
Printer with auto cutter (full cut/partial cut) is also available.
• UL Recognized
File No.E171434
*1 ESC/POS
TM
is a registered trademark of SEIKO EPSON Corp.
24V DRIVE, ULTRA HIGH SPEED LINE THERMAL PRINTER
3” MECHANISM, WITH CUTTER
FTP-632MCL301
FTP-622DCL011
FTP-622CU101
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 FTP-632MCL301/302 NOT FOR NEW DESIGN Part number FTP-632MCL301/302 Printing method Thermal-sensitive line dot method Dot structure 576 dots/line Dot pitch (Horizontal) 0.125 mm (8 dots/mm)—Dot density Dot pitch (Vertical) 0.125 mm (8 dots/mm)—Line feed pitch Effective printing area 72 mm MCL301 80...
4 FTP-632MCL301/302 NOT FOR NEW DESIGN Unit: mm Mechanism with cutter 300 ± 15 2—M 3 burring (FIXING HOLE FROM BOTTOM SIDE) 42 67.7 ± 1 (70.8) 14.2 3—M 3(FIXING HOLE FROM UPPER SIDE) (60.5) 38.5 13.3 3–2.0 or less 57 ± 1 235 ± 15 (78.6) MCL301 MCL302 63.4 76.8(POSITIONING H0LE) 117.5 Note: all dimen...
5 FTP-632MCL301/302 NOT FOR NEW DESIGN ■ INTERFACE, COMMAND, OPTIONS Interface board Unit: mm ■ FUNCTION ITEM ITEM 1. Test printing 8. Cutter trouble detection 2. Paper-out detection 9. Motor power save 3. Paper near end detection 10. Mark detection 4. Head-up detection 11. MCU trouble detection 5. ...
