Fujitsu FTP-623MCL400 - Manual
Fujitsu FTP-623MCL400 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 4 – DIMENSIONS; Printer mechanism; Front and top insertion type
- Page 5 – Interface board
- Page 6 – Components; INTERFACE; Centronics standard; Connector part number
- Page 8 – CONNECTOR PIN ASSIGNMENT; Part number
- Page 9 – used at this interface board.
- Page 11 – PRINTING COMMANDS (CENTRONICS STANDARD INTERFACE); Bus interface uses different commands.
- Page 12 – OPTIONS
FTP-623MCL400/FTP-623DCL002
■
OVERVIEW
This battery driven, micro line thermal printer provides high speed
printing for 2-inch wide (58mm) paper. It is suitable for portable
equipment that requires compact, light weight components.
In addition to the interface board, a driving LSI (MCU + Gate Array)
is also available.
■
HIGHLIGHTS
• Driven by batteries (direct connect between thermal head
and batteries)
It can be driven by a broad range of voltages (4.2 to 8.5 V) of
NiCd or Nickel-Hydrogen by using Fujitsu Components' unique
head drive control system. The battery pack can be connected
directly to the print head without a voltage regulator. Also, a
lithium-ion battery can be used.
• High speed printing
It can print at approximately 23 character lines/s (460 dotlines/s =
57.5 mm/s).
• Compact and lightweight
It has a light weight of approximately 75 g.
• Low power consumption
The peak current for head driving is approximately 3.0 A.
• Selectable paper paths
Front, rear, and top paper insertion paths can be used.
• Paper auto loading function
Paper feeding is enabled by operating the head up lever.
• Variety of suitable papers
This model is suitable for printing on a variety of papers,
including 1-ply roll paper, 2-ply paper (TCC and roll), labels, and
long-life paper.
BATTERY DRIVE, MICRO LINE THERMAL PRINTER
2” TYPE MECHANISM AND INTERFACE BOARD
FTP-623MCL400
FTP-623DCL002
FTP-623CU001, FTP-633GA101
1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
4 FTP-623MCL400/FTP-623DCL002 70° (3) 20 70° 30° (1) (2) 12 (14) (1): Head down(2): Paper feed(3): Head up lock ø 1 2 (ø 1 4 ) (ø 1 8 ) Paper center 73 2 1 .5 5 3 2 58.2 (Paper insertion) 25 (Photo interrupter) 60° 4 6 3 4 .5 7 .5 Paper outangle 4 ° 3.1 1.7 1 3 .7 1 .0 62.5 12.5 34 3.9 (3 1 ) 6.1 Ph...
5 FTP-623MCL400/FTP-623DCL002 Interface board Unit: mm Height of devices side 10.0 17.6 6.0 1.6 ø3.6 CN6 CN4 CN2 CN1 CN5 16.5 5.1 85.1 42.5 13.3 5.1 90.2 46.5 10.0 5.1 102.9 73.7 108.0 102.9 69.8 5.1 5.1 4.6 CN8 CN7 Height of solder side
6 FTP-623MCL400/FTP-623DCL002 No. Signal I/O Contents No. Signal I/O Contents 1 PRSTB I Data strobe 2 PRSTB-RET — Connected to logic GND 3 PRDT0 I Data 0 4 PRDT0-RET — Connected to logic GND 5 PRDT1 I Data 1 6 PRDT1-RET — Connected to logic GND 7 PRDT2 I Data 2 8 PRDT2-RET — Connected to logic GND 9...
