Fujitsu FPCCR05 - Manual
Fujitsu FPCCR05 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Installing the System in the Cradle; Attaching the DC Adapter
- Page 3 – Verifying Battery Size; If your Tablet PC has a high-capacity main battery
- Page 4 – Installing the Tablet PC in the Charge-Only Cradle
- Page 5 – Removing the Tablet PC from the Charge-Only Cradle; Mounting the Cradle on a Wall; Holding the cradle portion with one hand and the base
- Page 6 – Once disengaged, store the base section in a safe place
The charge-only cradle is designed for a desktop, counter
top, or wall-mounted installation where a quick connection
to a DC power source is needed. The Tablet PC can be
placed in the charge-only cradle and used while external DC
power is supplied to the cradle. The connector pins on the
cradle are “high-usage” type pins and are designed to with-
stand a large number of insertions and removals. The cradle
includes two adapters that fit over the Tablet PC’s DC-in
port to make it more suitable for the high-usage environ-
ment.
The cradle can accommodate a Tablet PC with a standard
main battery or an optional high-capacity battery. A remov-
able spacer is included with the cradle to make the cradle
usable with either battery.
I N S T R U C T I O N S
Charge-Only Cradle
User’s Guide
FPCCR05
F u j i t s u C o m p u t e r S y s t e m s
Charge-only cradle.fm Page 1 Thursday, February 26, 2004 2:50 PM
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Installing the System in the Cradle To install the Tablet PC in the charge-only cradle, you must first attach a DC adapter to the system’s DC port. Attaching the DC Adapter 1. Hold your system so that the left side (when viewed in portrait mode) with the DC-in port is facing you (Figure 1). Figure...
3 Verifying Battery Size Determine whether your Tablet PC has a standard main battery or an optional high-capacity main battery installed. ■ If your Tablet PC has a high-capacity main battery installed, remove the spacer (Figure 2) that is located inside the cradle on the right. Pull it upwards to r...
4 Installing the Tablet PC in the Charge-Only Cradle 1. Place the cradle on the flat, stable location in which it will be used . 2. After verifying that the spacer is configured correctly and the DC adapter is attached to the DC-in port, hold the system in landscape mode, with the buttons arranged a...
