Fujitsu FPCCC47 - Manual
Fujitsu FPCCC47 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Transparent
- Page 3 – Installing the Tablet PC; Side Flap
- Page 4 – System with high-capacity battery installed:
- Page 5 – System with the main battery installed:
- Page 6 – Attaching a Shoulder Strap; You can also use one of the D-rings to attach a pen tether.; Caring for the bump case
These instructions provide details on using the
FPCCC47 Bump Case. This case is designed for
use with your Tablet PC. The bump case provides
added protection when transporting, using, or
storing the Tablet PC.
We strongly recommend that you read these
instructions prior to using the bump case with
your computer.
I N S T R U C T I O N S
Bump Case User’s Guide
FPCCC47
F u j i t s u C o m p u t e r S y s t e m s
FPC58-1044-01 Bump Case.fm Page 1 Monday, December 8, 2003 1:28 PM
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Figure 1. Bump case - Front DC-In access LAN/Modem access USB 2.0/IEEE 1394/ Pen holder External Monitor port access microphone/headphone jackaccess Transparent security strap FPC58-1044-01 Bump Case.fm Page 2 Monday, December 8, 2003 1:28 PM
3 Installing the Tablet PC Figure 2. Bump case - Rear Prior to installing the Tablet PC into the bump case, remove the pen. Once the system is installed, you will not be able to remove the pen. Store the pen in the pen holder. (Figure 1) This bump case is designed to accommodate a system with a stan...
4 To install your Tablet PC into the bump case, position the case face down as shown in Figure 3. Open the side flap of the case. The flap is secured by a long strip of Velcro® that is attached to the back of the bump case. Note that the left side of the case is open for port access, but the system ...
