Page 2 - Introduction
i Introduction Thank you for purchasing the "Scanner Utility for Microsoft Windows V8.0". This software contains a TWAIN-compliant image scanner driver (simply called "driver" in this guide) and utilities. This guide provides a description summary of the driver, as well as a descript...
Page 3 - Trademarks; Adaptec is a registered trademark of Adaptec Inc.
ii Trademarks MS-DOS, Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation. IBM PC/AT and DOS/V are registered trademark of International Business Machine Corporation. Adaptec is a registered trademark of Adaptec Inc. EZ-SCSI is a trademark of Adaptec Inc. Other prod...
Page 5 - Contents
iv Contents 1. Outline ............................................................................................. 1 1.1 Characteristics of this Driver........................................................................... 1 1.2 Operating Environment...............................................
Page 8 - Explanatory Notes
2 1.3 Explanatory Notes The descriptions in this manual are prepared based on the following rules: ◊ Menus and buttons The menus and buttons used in the program description are enclosed in []. Example: [File] menu, [OK] button ◊ Keyboard The keytop indications comply with the standard keyboard of th...
Page 9 - Explanation of terms; IPC option board
3 1.4 Explanation of terms ◊ IPC option board IPC-2/2D in this guide refers to the IPC-2 and IPC-2D image processing circuit. IPC-3/3D in this guide refers to the IPC-3 and IPC-3D option board.
Page 10 - TWAIN Application; TWAIN mainly applies to the following three software components:
4 2. TWAIN 2.1 TWAIN TWAIN is the specification that defines the standard software protocol and application programming interface (API) for data exchange between a software application program and an image input device such as the image scanner. [TWAIN development background] In the past, developmen...
Page 11 - Application software; Source manager; Figure TWAIN Application
5 • Application software (photo retouching software, etc) ‚ Source manager (TWAIN.DLL/TWAIN_32.DLL, etc) ƒ Source (Image scanner control of the driver, etc) Image scanner, etc. Figure TWAIN Application
Page 12 - Starting Installation
6 3. Installation 3.1 Preparation 1. Check that the operating system is installed correctly. 2. Check that the SCSI adapter is connected to the computer. 3. Check whether the SCSI driver and ASPI manager are installed correctly and operating (For windows 2000, 4.60 or later) Note Version 4.01 or l...
Page 13 - Figure Fujitsu TWAIN group; Note
7 Figure Fujitsu TWAIN group 3.3 Uninstall The uninstall process removes the software and returns the hard disk to its pre-installation state. 1. Click on [Start], followed by [Settings], and then [Control Panel]. The Control Panel is then displayed. 2. Double-click on "Add/Remove Programs" ...
Page 14 - Using the Driver; Selecting the Driver
8 4. Using the Driver 4.1 Selecting the Driver To use this driver from the TWAIN application, select "FUJITSU TWAIN32" from the TWAIN data source (driver) selection screen. For general application, the data source selection screen is displayed by selecting the [Select Scanner] or [Acquire .....
Page 15 - Screen Configuration; Figure Main Dialog
9 4.2 Screen Configuration Figure Main Dialog The following pages contain the explanation and operation description for each part.
Page 16 - Displaying Driver Information; Image scanner name
10 4.3 Displaying Driver Information ♦ Image scanner name The model name, option port name, and capacity of internal scanner memory (in units of megabytes) of the connected image scanner are displayed. If no image scanner is connected, this field is blank. To change the selected scanner, click the [...
Page 17 - Setting Information on Image Scanning; Current side
11 ♦ Data size The approximate amount of data per image when data is scanned in the present option. Note This value is the amount of uncompressed data. The size of the stored file will differ from this value and is usually smaller if image compression is chosen and the image is compressed. 4.4 Setti...
Page 18 - Figure Custom paper size setting dialog
12 ♦ Paper Size Selects a paper size corresponding to the size of the document to be scanned. Select a standard paper size from the list or [Custom]. If [Custom] is selected, the "Custom Paper Size Setting" dialog appears. Enter the size of the document to be scanned. Some paper sizes may no...
Page 24 - Sets the contrast of light and shadow in a scanned image.; Specifying Driver Operation; Scans the specified scan range based on set values.
18 ♦ Contrast: Sets the contrast of light and shadow in a scanned image. Specify the contrast with a number in the range of 1 (low [soft]) to 255 (high [sharp]). The contrast can be set if "Gray Scale" is selected in "Image Mode." If this value is increased, the dark part of the imag...
Page 25 - Progress indicator; Closes the dialog box without scanning.
19 Progress indicator ♦ [Close] / [OK] Closes the dialog box without scanning. If a setting is changed, the changed setting is saved in the initial value file. ♦ [Reset] Restores the current setting values to the status immediately after the window is opened. ♦ [Help] Displays online help. When the ...
Page 27 - Setting Options; is displayed for options that cannot be used.)
21 4.7 Setting Options The "option dialog" is used to set device-specific functions and the items that differ depending on whether the scanner used supports them. The option specification is divided into "Rotation", "Job/Cache", "Generic", and "Endorser". The ...
Page 28 - The options are described below:; Flip Side Rotation
22 The options are described below: Figure Option dialog (Rotation) ♦ Flip Side Rotation Specifies the binding of the document when both sides are scanned using ADF. Book Outputs the scanned image for both sides as is. Select this option to scan documents bound on the left or right side. Fanfold Sca...
Page 37 - Setting Advance Options
31 4.8 Setting Advance Options The "advance dialog" is used to set items related to image processing. The settings apply to device-specific functions and items that differ according to whether the scanner used supports them. The advance option specification is divided into "Color Varianc...
Page 38 - Figure Advance dialog (density correction); Gamma Pattern
32 The options are described below: Figure Advance dialog (density correction) ♦ Gamma Pattern This option corrects distortions from nonlinear image representation. Scanner sensors are generally designed to generate output linear to the density of the light reflected from the document. However, most...
Page 39 - White Level Follower
33 When "Download Pattern" is selected, the above dialog box opens. Select the gamma pattern download file to be used from the list of file names. Then, press the [OK] button. Correction will then be executed using the selected gamma pattern. If the gamma pattern download file has not been r...
Page 40 - Figure Advance dialog (image processing)
34 ♦ Dropout Color This option enables scanning excluding the selected color information of green, red, or blue (the three primary colors of light). For example, to scan black characters framed in red, selecting red for scanning will scan only the black characters. ♦ Reverse This option specifies wh...
Page 45 - higher the highlight value, the lighter the image.
39 Figure Advance dialog (Color) <Image Mode : Color selected> ♦ Shadow/Highlight Shadow : The highlight allows the darkest part of the document to be controlled. The higher the shadow value, the darker the image. Highlight : The highlight allows the brightest part of the document to be contro...
Page 49 - Setting the Configuration Options; Figure Option dialog box (simplified DTC); Setting Files
43 4.9 Setting the Configuration Options These options are used to manage the setting files, and switch the basic scan dialog display. Press the [Config] button of the main dialog to open the [Configuration] dialog box shown below. Figure Option dialog box (simplified DTC) ♦ Setting Files The settin...
Page 52 - Basic Scan Dialog; Select the file to be used from the list of setting files.
46 4.10 Basic Scan Dialog The basic scan dialog contains only the minimum functions required for scanning. The detailed setting functions of the main dialog have been omitted. Scanning can be easily performed by selecting a registered setting file. The basic scan dialog is also useful for avoiding i...
Page 54 - Download Pattern File; Dithered download pattern file
48 4.11 Download Pattern File The "download pattern file" of this driver is a file that defines the patterns to be used by the scanner to execute various image processing. This file is available in the following two versions. Each version can be selected using the [Download Selection Dialog]...
Page 55 - Example
49 Example 8, 8, 128, 128, 128, 128, 128, 128, 128, 128, 255, 128, 128, 128, 128, 128, 128, 128, 255, 255, 128, 128, 128, 128, 128, 128, 255, 255, 255, 128, 128, 128, 128, 128, 255, 255, 255, 255, 128, 128, 128, 128, 255, 255, 255, 255, 255, 128, 128, 128, 255, 255, 255, 255, 255, 255, 128, 128, 255...
Page 58 - Using the Gamma Pattern Editor; Figure Gamma Pattern Editor Tool start-up menu
52 5. Using the Gamma Pattern Editor 5.1 Start-up Click on "Start" and select "Download Pattern Editor" from "Scanner Utility for Microsoft Windows" under "Programs." The following menu is displayed: Figure Gamma Pattern Editor Tool start-up menu
Page 59 - Select this to exit the editing program.
53 5.2 [File] menu ♦ [Load] This menu is used to read the Gamma Download file and display the graph and gradations. The name of the open file is displayed above the graph area. ♦ [Save] The gamma pattern currently being edited is saved in the file whose name is displayed above the graph area. If no ...
Page 61 - Gamma Pattern Editing
55 5.4 Gamma Pattern Editing ♦ Graph Area The graph area is a 256-dot × 256-dot white square area bordered by black lines, where the relationship between the input values of 0 to 255 (x axis) and output values of 0 to 255 (y axis) is indicated in blue lines. Each graph dot represents one division (u...
Page 62 - How to Use the FUJITSU Scanner Control Center; How to Start the FUJITSU Scanner Control Center; The scanner power is turned off and not connected:
56 6. How to Use the FUJITSU Scanner Control Center 6.1 Outline This software that is resident in the system continuously monitors the scanner connected and starts the target application in response to an instruction from the operation panel in the scanner. (Pressing the start button on the scanner ...
Page 63 - Rescans the scanner that is currently connected.
57 Right-clicking the icon displays the following pop-up menu. Left-clicking the icon displays the scanner being connected as shown below. The scanner that has been monitored by this application is indicated with a check mark. 6.3 Pop-up Menu ♦ [Rescan Scanner] Rescans the scanner that is currently ...
Page 78 - Relevant Image Scanner Specification
72 8. Appendix 8.1 Relevant Image Scanner Specification Product: M3093GX 1 (device name: fi-4320S) Type: Desktop Image sensor: Reduced optical system Operating method: Document fixed, scanner unit moving (flat bed), Automatic Document Feeder (ADF) Light source: Xe discharge tube (Green) Basic resolu...
Page 93 - Maintenance Service
87 8.2 Maintenance Service This section explains briefly how you can help us to provide you with high-quality maintenance service. Since it is practically impossible for the Fujitsu service staff to be aware of every detail of your daily scanning operation, please understand that our staff may somet...
Page 94 - TWAIN Scanner/Driver Utility; Users Guide
88 TWAIN Scanner/Driver Utility “Scanner Utility for Microsoft® Windows®” Users Guide 32 bit version First Edition September 2000 All Rights Reserved, Copyright FUJITSU LIMITED 1998, 2000 • The contents of this document may change for improvements without prior notice. • Fujitsu takes no responsib...
