Fujitsu B24W-5 - Manual

Your LCD screen... Your LCD screen... has a whole range of useful features and functions, e.g.: • TFT display (Thin Film Transistor; active matrix) • minimal space requirements thanks to slim casing • optimum ergonomic characteristics (totally distortion-free, excellent picturede fi nition and colou...

Your LCD screen... Further information Details of how you set the resolution and refresh rate are provided in the documentationfor your display adapter and the associated driver software. For ergonomic reasons, a screen resolution of 1920 x 1200 pixels is recommended. Because of the technology used ...

Important notes Important notes Impo rtant no te s Notes In this chapter you will fi nd information regarding safety which it is essential to take note of when working with your device. Safety instructions This device complies with the relevant safety regulations for data processing equipment,includ...

Important notes • The device may only be operated in the wide format (0° landscape mode). The buttons ofthe control panel are located at the bottom in the middle of the monitor. • Store this manual close to the device. If you pass the device on to thirdparties, you should pass this manual on with it...

Important notes CE marking The shipped version of this device complies with the requirements of EECdirectives 2004/108/EC "Electromagnetic compatibility" and 2006/95/EC"Low voltage directive". Energy Star Energy S ta r The Fujitsu LCD colour monitor is equipped with a power managemen...

Important notes Disposal and recycling This device has been manufactured as far as possible from materials which can be recycled ordisposed of in such a way that the environment is not damaged. The device may be taken back afteruse to be reused or recycled, provided that it is returned in a conditio...

Getting started Getting started Unpacking and checking the delivery The display surface of the device is sensitive to pressure and scratches.Always hold the device by the casing! The complete device package includes: • one monitor • one data cable (D-SUB) • one data cable (DVI-D) • one audio cable •...

Getting started Setting up an ergonomic video workstation 1 ► Do not position the video workstationopposite a window (1). 1 ► Position the monitor outside the reachof a light source (1). 1 ► Position the keyboard where it iseasiest to reach (1). 8 A26361-K1334-Z220-1-7619, edition 1

Getting started 1 50 cm ► Position the monitor so that the eye distanceto the screen (1) is around 50 cm. 3 0 3 0 6 5 6 5 0 6 0 1 2 2 ► Position the monitor for optimum viewing(1). The monitor should under nocircumstances fall outside the permissibleviewing space (2). Depending on the situation, it ...

Getting started Removing monitor base Before you can use a swivel arm or a wall bracket, you must remove the monitor base. The display surface is susceptible to scratching! ► Switch off the monitor and pull the powerplug out of the power socket. ► Lay the monitor on its face on a soft surface. ► Rem...

Getting started Connecting the device Please observe the safety information in "Important notes", Page 3 . CE conformance and optimum picture quality are guaranteed only ifyou use the data cables supplied. ► Switch off the monitor and the computer. ► Disconnect the power plug from the comput...

Getting started ► Connect one of the connectors of the data cable to the D-SUB socket or DVI-D socket ofthe monitor and secure the plug-in connection by tightening the safety screws. The monitor automatically detects the input when only one signal source is connected. ► Insert one plug of the audio ...

Operation Operation Switching the device on and off 1 = Buttons for the OSD menu (On-Screen Display) 2 = Power supply indicator 3 = ON/OFF switch Press the buttons upwards from below. The colour of the LED indicator changes as follows: LED indicator Status blue Monitor and computer are switched on (...

Operation Front Rear 1 2 1 = power supply indicator2 = ON/OFF switch ► Switch the device on using the ON/OFF switch. Only switch on the computer after you have switched on the monitor. Notes on power management If your computer is equipped with power management (power-saving mode), the monitor can f...

Operation Changing the monitor settings When putting the monitor into operation for the fi rst time, the screen display should be optimally adapted to the display adapter used. Changing the monitor settings with the buttonsof the control panel The buttons of the control panel have two functions. Wit...

Operation Activate/deactivate ECO operating mode The power consumption of the device can be decreased by reducingthe brightness of the picture. ► Press the Forwards / ECO button to switch the ECO operating mode on or off. The message Action was executed appears. If the ECO operating mode is activate...

Operation If you wish to change other settings, select the corresponding function from the OSDmain menu. All possible adjustments of the main menu are described below. OSD menu functions The OSD menu for analogue monitor operation is described below. Duringdigital operation some functions are not av...

Operation Adjusting the screen size and position Calling the Image adjust setting window H-position * Adjustment of the picture horizontal position With this function you can move the picture to the left or to the right. V-position * Adjusting the picture vertical position With this function you can...

Operation Adjusting the display of the OSD menu Calling the OSD Setup adjustment window Language Selecting the language for the OSD menu With this function you choose between English (default setting), French,German, Italian and Spanish as the language for the OSD menu. OSDH position Setting the hor...

Notes on ergonomic colour adjustment Notes on ergonomic colour adjustment If you select colours for the monitor in your application programmes,take note of the information below. The primary colours blue and red on a dark background do not produce the minimumrequired contrast of 3:1 and are therefor...

Troubleshooting Troubleshooting Should an error occur, fi rst check the following points. If the distortion is still not eliminated, the monitor should, if possible, be checked on another computer. If you are unable to solve the problem, please inform our help desk. Having this problem? Check the fo...

Explanatory information about standard ISO 9241-3 Explanatory information about standard ISO 9241-3 Lit or unlit pixels Today’s production techniques cannot guarantee an absolutely fault-free screen display. Afew isolated pixels may be constantly lit or unlit. The maximum permitted number of faultyp...

Technical data Technical data Condensation is not permitted, neither in the rated range of operationnor in the limit range of operation. B24W-5 ECO Dimensions and weight Visible diagonals 61 cm Dot pitch 0.27 mm Width 518.4 mm Image size Height 320.4 mm Maximum resolution 1920 x 1200 Width 558 mm He...

Technical data Ambient conditions Environment class 3K2, DIN IEC 721Rated range of operation Humidity 15 ℃ .... 35 ℃ 20 % .... 85 % Limit range of operation Humidity 5 °C .... 35 °C 20 % .... 85 % VESA-DDC-compatible VGA interface Your monitor is equipped with a VESA-DDC-compatible VGA interface. VE...