Fujitsu B17-5 ECO - Manual

Your LCD screen... Your LCD screen... has a whole range of useful features and functions, e.g.: • TFT display (Thin Film Transistor; active matrix) • minimal space requirements thanks to slim casing • optimum ergonomic characteristics (totally distortion-free, excellent picturede fi nition and colou...

Your LCD screen... Further information Details of how you set the resolution and refresh rate are provided in the documentationfor your display adapter and the associated driver software. For ergonomic reasons, a screen resolution of 1280 x 1024 pixels is recommended. Because of the technology used ...

Important notes Important notes Impo rtant no te s Notes In this chapter you will fi nd information regarding safety which it is essential to take note of when working with your device. Safety instructions This device complies with the relevant safety regulations for data processing equipment,includ...

Important notes • The device must only be operated in landscape mode (0°) and portrait mode (90°). Thecontrol buttons are located in the middle of the bottom of the monitor in landscape mode(0°) and at the left-hand side of the monitor in portrait mode (90°). • Store this manual close to the device....

Important notes CE marking The shipped version of this device complies with the requirements of EECdirectives 2004/108/EC "Electromagnetic compatibility" and 2006/95/EC"Low voltage directive". Energy Star Energy S ta r The Fujitsu LCD colour monitor is equipped with a powermanagement...

Important notes Disposal and recycling This device has been manufactured as far as possible from materials which can be recycled ordisposed of in such a way that the environment is not damaged. The device may be taken back afteruse to be reused or recycled, provided that it is returned in a conditio...

Getting started Getting started Unpacking and checking the delivery The display surface of the device is sensitive to pressure and scratches.Always hold the device by the casing! The complete device package includes: • one monitor • one data cable (D-SUB) • one data cable (DVI-D) • one audio cable •...

Getting started Setting up an ergonomic video workstation 1 ► Do not position the video workstationopposite a window (1). 1 ► Position the monitor outside the reachof a light source (1). 1 ► Position the keyboard where it iseasiest to reach (1). 8 A26361-K1317-Z220-1-7619, edition 2

Getting started Adjusting the height The height of the monitor can be adjusted by approximately 120 mm. ► Grasp the monitor with both hands on the right and left edge of the casingand move it upward or downward. Adjusting the inclination ► Hold the monitor with both hands on the left and right sides...

Getting started Removing monitor base Before you can use a swivel arm or a wall bracket, you must remove the monitor base. The display surface is susceptible to scratching! ► Switch off the monitor and pull the powerplug out of the power socket. ► Lay the monitor on its face on a soft surface. ► Rem...

Getting started Connecting the device Please observe the safety information in "Important notes", Page 3 . CE conformance and optimum picture quality are guaranteed only ifyou use the data cables supplied. ► Switch off the monitor and the computer. ► Disconnect the power plug from the comput...

Getting started 1 2 3 4 5 0 - ECO / BASIC 1 = Green standby mode switch2 = Power connector3 = AUDIO-IN socket 4 = DVI-D socket (DVI)5 = D-SUB socket (VGA) ► Connect one of the connectors of the data cable to the D-SUB socket or DVI-D socket ofthe monitor and secure the plug-in connection by tighteni...

Operation Operation Switching the device on and off 2 1 1 = Power supply indicator 2 = ON/OFF switch Press the buttons from the bottom up. The colour of the LED indicator changes as follows: LED indicator Status blue Monitor and computer are switched on (normal mode). green Monitor and computer are ...

Operation In switch position "0" (ECO), green standby mode is activated, in which the monitorconsumes ≤ 0.1 W. If the monitor cannot be switched on and remains dark, the switch must be set to "-" (BASIC). The monitor then consumes < 1 W in standby mode. ► Switch the device on usin...

Operation Changing the monitor settings When putting the monitor into operation for the fi rst time, the screen display should be optimally adapted to the display adapter used. Changing the monitor settings with the buttonsof the control panel The buttons of the control panel have two functions. Wit...

Operation Activate/deactivate ECO operating mode The power consumption of the device can be decreased by reducingthe brightness of the picture. ► Press the Forwards / ECO button to switch the ECO operating mode on or off. The message ECO on / off is displayed. If the ECO operating mode is activated,...

Operation If you wish to change other settings, select the corresponding function from the OSDmain menu. All possible adjustments of the main menu are described below. OSD menu functions The OSD menu for analog monitor operation is described below. Duringdigital operation some functions are not avai...

Operation Adjusting the picture size and position Open the Image adjust window H-position Adjusting the horizontal position With this function you can move the picture to the left or to the right. V-position Adjusting the vertical position With this function you can move the picture up or down. Cloc...

Operation Adjusting the display of the OSD menu Calling the OSD Setup adjustment window Language Selecting the language for the OSD menu With this function you choose between English (default setting), French,German, Italian and Spanish as the language for the OSD menu. OSDH position Setting the hor...

Operation Displaying information Call the Information setting window With this function the model designation, serial number, resolution, H/Vfrequency, input signal and polarity of the synchronisation signal aredisplayed. 22 A26361-K1317-Z220-1-7619, edition 2

Troubleshooting Troubleshooting Should an error occur, fi rst check the following points. If the distortion is still not eliminated, the monitor should, if possible, be checked on another computer. If you are unable to solve the problem, please inform our help desk. Having this problem? Check the fo...

Notes regarding the DIN EN ISO 13406-2 standard Notes regarding the DIN EN ISO 13406-2 standard Permanently unlit or lit pixels The standard of production techniques today cannot guarantee an absolutely fault-free screendisplay. A few isolated constant lit or unlit pixels (picture elements) may be p...

Technical speci fi cation Environmental conditions Environment class 3K2, DIN IEC 721Rated range of operation Humidity 15 °C .... 35 °C 20 % .... 85 % Limit range of operation Humidity 5 °C .... 35 °C 20 % .... 85 % VESA-DDC-compatible VGA interface Your monitor is equipped with a VESA-DDC-compatibl...

Technical speci fi cation SUB D port 6 10 11 15 5 1 Pin Meaning 1 Video input red 2 Video input green 3 Video input blue 4 Ground 5 Ground 6 Video ground red 7 Video ground green 8 Video ground blue 9 +5 V (DDC) 10 Sync. ground 11 Ground 12 DDC Data 13 H. sync 14 V. sync 15 DDC Clock 28 A26361-K1317...