Page 5 - Operating Manual
SCENICVIEW A17-2 / A19-1 / A17-2 DVI / A19-1 DVI / RE17-1 DE / RE19-1 DE Operating Manual January 2006 edition
Page 7 - Contents
A26361-K1063-Z121-1-7619, edition 1 Contents Introduction ........................................................................................................................................... 1 Notational conventions ................................................................................
Page 9 - Introduction
A26361-K1063-Z121-1-7619, edition 1 1 Introduction Your new LCD (Liquid Crystal Display) monitor offers numerous features and functions, for example: ● TFT display (Thin Film Transistor; active matrix) ● minimal space requirements thanks to slim casing ● optimum ergonomic characteristics (totally di...
Page 10 - Notational conventions; Important notes; Safety notes
2 A26361-K1063-Z121-1-7619, edition 1 Notational conventions The meanings of the symbols and fonts used in this manual are as follows: ! Pay particular attention to text marked with this symbol. Failure to observe this warning endangers your life, destroys the device, or may lead to loss of data. i ...
Page 11 - Cleaning
A26361-K1063-Z121-1-7619, edition 1 3 ● Lay all cables so that nobody can stand on them or trip over them. When attaching the device, observe the relevant notes in the "Connecting the monitor" chapter. ● No data transfer cables should be connected or disconnected during a thunderstorm. ● Mak...
Page 14 - Disposal and recycling; Checking the contents of the consignment
6 A26361-K1063-Z121-1-7619, edition 1 Disposal and recycling This device has been manufactured to the highest possible degree from materials which can be recycled or disposed of in a manner that is not environmentally damaging. The device may be taken back after use to be recycled, provided that it ...
Page 15 - Installing an ergonomic video workstation
A26361-K1063-Z121-1-7619, edition 1 7 Installing an ergonomic video workstation Before you set up your equipment, you should select a suitable position for working at the monitor. Please observe the following advice when installing a video workstation. 1 1 2 1 = Windows Avoid direct and reflected gl...
Page 16 - Mounting and removing the monitor base; Mounting monitor base
8 A26361-K1063-Z121-1-7619, edition 1 Mounting and removing the monitor base Mounting monitor base On delivery the monitor base is removed.
Page 17 - Removing monitor base
A26361-K1063-Z121-1-7619, edition 1 9 Removing monitor base Before you can use a swivel arm or a wall bracket, you must remove the entire monitor base: ► Switch off the monitor and pull the power plug out of the power socket. ! The display surface is susceptible to scratching! ► Lay the monitor on i...
Page 18 - Connecting the monitor; Connecting cables to the monitor
10 A26361-K1063-Z121-1-7619, edition 1 Connecting the monitor ! Observe the "Safety notes" in the "Important notes" chapter in this operating manual. CE conformance and optimum picture quality are guaranteed only if you use the data cable supplied. Do not cover the ventilation openin...
Page 19 - Connecting cables to the computer
A26361-K1063-Z121-1-7619, edition 1 11 ► Insert one plug of the audio line in the AUDIO IN (5) socket on the monitor and make sure it is properly engaged. ► Plug the power cable supplied into the power connector (1) of the monitor. ► Mount the cover over the connections. i A lock (Kensington Lock) c...
Page 20 - Operation of the monitor; Adjusting rake
12 A26361-K1063-Z121-1-7619, edition 1 Operation of the monitor The monitor offers the following possibilities that enable it to be optimally adjusted for the respective user and the respective situation. Adjusting rake The rake of the monitor can be adjusted by -5° (forward) and +20° (back) from it...
Page 21 - Notes on power management
A26361-K1063-Z121-1-7619, edition 1 13 Notes on power management If your computer is equipped with power management, the monitor can support this function fully. Here the monitor does not distinguish between the individual energy-saving modes of the computer (standby mode, suspend mode and OFF mode)...
Page 22 - Changing the monitor settings; Basic monitor settings
14 A26361-K1063-Z121-1-7619, edition 1 Changing the monitor settings When putting the monitor into operation for the first time, the screen display should be optimally adapted to the screen controller used and adjusted in accordance with your needs. Basic monitor settings If one of the operating sys...
Page 23 - Monitor settings using the OSD menu
A26361-K1063-Z121-1-7619, edition 1 15 Monitor settings using the OSD menu With the buttons on the control panel, call up and use the integrated OSD (On-Screen display) menu. i The OSD menu is available in different languages. The English menu names are used in the following description (default set...
Page 27 - Notes on ergonomic colour adjustment
A26361-K1063-Z121-1-7619, edition 1 19 Notes on ergonomic colour adjustment If you select colours for the display in your application programmes, take note of the information below. The primary colours blue and red on a dark background do not produce the minimum required contrast of 3:1 and are ther...
Page 28 - Troubleshooting
20 A26361-K1063-Z121-1-7619, edition 1 Troubleshooting Should an error occur, first check the following points. If the distortion is still not eliminated, the monitor should, if possible, be checked on another computer. If you are unable to solve the problem, please inform our help desk. Having this...
Page 30 - Notes regarding the DIN EN ISO 13406-2 standard
22 A26361-K1063-Z121-1-7619, edition 1 Notes regarding the DIN EN ISO 13406-2 standard Permanently unlit or lit pixels The standard of production techniques today cannot guarantee an absolutely fault-free screen display. A few isolated constant lit or unlit pixels (picture elements) may be present. ...
Page 31 - Technical data
A26361-K1063-Z121-1-7619, edition 1 23 Technical data 17" LCD Monitor 19" LCD Monitor Dimensions and weight Visible diagonals: 43 cm 48 cm Dot pitch: 0.264 mm 0.294 mm Maximal resolution: 1280 x 1024 1280 x 1024 Dimensions incl. monitor base: Dimensions box: Width: Height: Depth: Width: Heig...
Page 32 - Preset operating modes
24 A26361-K1063-Z121-1-7619, edition 1 Environmental conditions Environment class 3K2, IEC 721 Rated range of operation: Humidity: 15 °C .... 35 °C 20 % .... 85 % Limit range of operation: Humidity: 5 °C .... 35 °C 20 % .... 85 % Condensation must be avoided. VESA-DDC-compatible VGA interface Your m...
Page 33 - Pin assignment D-SUB
A26361-K1063-Z121-1-7619, edition 1 25 Pin assignment D-SUB 1 5 6 10 11 15 Pin Meaning Pin Meaning 1 Video input red 9 +5 V (DDC) 2 Video input green 10 Sync. earth 3 Video input blue 11 not assigned 4 not assigned 12 DDC-Data 5 Earth 13 H. sync 6 Red video earth 14 V. sync 7 Green video earth 15 DD...
