Flymo HT60 - Manual
Flymo HT60 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Carton Contents; Safety; Explanation of Symbols on your product
- Page 4 – Assembly of Handguard.; Insert Handguard into slot as illustrated in; figure A; Assembly
- Page 5 – Starting and Stopping
- Page 6 – Caring for your Hedgetrimmer; Using a soft brush - remove debris from all; IMPORTANT; The use of 2 number 10 screws (40mm in
- Page 7 – Fault Finding Hints; Guarantee & Guarantee Policy
- Page 8 – The Electrolux Group.; Service Recommendations; We strongly recommend that your product; Should it be necessary for work to be carried; Declaration of Conformity
IMPOR
TANT INFORMA
TION
Read before use
& retain for future reference
For all customer enquiries or for replacement parts, contact:-
☎
☎
01325 300303
www.flymo.com
HT42/420 HT45/450
HT51/510 HT60/600
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
1 Carton Contents IMPORTANT ! Please check the contents of the carton are correct BEFORE assembling your new product. IF ANY PARTS ARE MISSING CONTACT:- Electrolux Outdoor Products Customer Service Department directTelephone : 01325 300303 Fax : 01325 318193 Safety If not used properly this Hedgetri...
3 CABLESIMPORTANT• Use only 1.00mm 2 size cable up to 40 metres length maximum. Maximum rating : 1.00mm 2 size cable, 10 amps 250 volts AC. • YOUR HEDGETRIMMER IS SUPPLIED WITH CABLE WIRED DIRECTLY INTO THEPRODUCT. 1. Mains Cables and Extension Cables are avail- able from your local Electrolux Outdo...
4 Before starting your Hedgetrimmer. 1. Form a loop in mains cable and push the loop through the hole in the handle asillustrated in Fig. B. 2. To secure, position the loop over the hook and pull back as illustrated in Fig. C. 3. Connect to mains and switch on4. Remove blade cover/storage holder as ...
