Fisher-Price H4792 - Manual
Fisher-Price H4792 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – WARNING; Never rely on the tray to restrain child.; All Shown Actual Size; Tighten or loosen all screws with a; Parts
- Page 3 – You may need the help of another adult to help you balance; Assembly; CAUTION; This package contains small parts
- Page 4 – • Set the frame assembly aside.; CORRECT
- Page 5 – Look at opening in the straight end of the tube. It should be; Look at opening in the straight end of the tube. It should be oval.
- Page 6 – • Fit the seat back to the seat bottom.; • Insert the rod into the side opening between the seat back; • Fit the seat back wire through the raised slots on the seat back.; • Fit the ends of the seat back wire into the outside holes in
- Page 7 – “snap”
- Page 8 – • From under the seat, fit the elastic loops onto the tabs; • From behind the seat, fit the pad elastic loops to the tabs on
- Page 9 – • Fit the toybar hubs to the seat tubes.
- Page 10 – Assembly is now complete.; • Fit and; the tray onto the seat armrests.; the tray links into the holes in the tray.
- Page 11 – alkaline; We recommend using; Battery Installation; Battery Safety Information
- Page 12 – Setup and Use; Securing your Infant; TIGHTEN
- Page 13 – Swinging; As with most battery-powered swings, a heavier child will reduce; Music; Low battery power may cause product movement to slow; • Lift or lower the seat wire into the grooves on the seat back.
- Page 14 – Using the Toy Bar; • Lift or lower the toy bar for baby’s enjoyment.; Care; • Remove the four pad elastic loops from the seat back and
- Page 15 – the front legs. Stand the frame against a wall for storage.; Storage; AUSTRALIA; Consumer Information
1
Product features and decorations may vary from picture above.
Instructions
Model Number: H4792
Please read these instructions before use of this product.
Adult assembly is required. Tool needed for assembly: Phillips Screwdriver (not included).
Requires four LR20 ("D")
alkaline
batteries (not included) for operation.
WARNING
IMPORTANT! KEEP INSTRUCTIONS FOR FUTURE REFERENCE.
www.fisher-price.com
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 2 WARNING To prevent serious injury or deathfrom falls and being strangled inthe restraint system:• Always use the restraint system. Never rely on the tray to restrain child. • Never use with an active child who may be able to climb out of the seat. • Not recommended for children who can sit up by...
IMPORTANT! Before assembly, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. DO NOT use if any parts are missing or broken. Contact Mattel for replacement parts and instructions if needed. Never substitute parts. 3 3 1 Button Leg Housing • Place a housing on a f...
4 3 HUBS FACING OUT FRONTBASECURVESINWARD HUBS FACING IN • Check to be sure you have assembled the leg assemblies to the bases correctly. Please refer to the illustrations above.• If the leg assemblies are assembled incorrectly to the bases, simply pull the legs from the bases. Please re-read and re...
