Page 3 - CONTENTS; SAVE THESE INSTRUCTIONS; Registration
1 CONTENTS Introduction 3 Safety and warnings 4 Installation instructions 9 Before you do your first wash 17 Getting started quickly 18 Washer dryer controls 20 Safety features 22 Sorting and loading 23 Detergent and fabric softener 27 Wash and dry cycles 30 Wash and dry cycle options 32 Customisin...
Page 5 - INTRODUCTION; Welcome
3 INTRODUCTION Welcome Thank you for buying a Fisher & Paykel washer dryer. We are proud of this washer dryer and trust it will serve you well for many years. Your washer dryer gives you the ultimate convenience in one simple machine. There are numerous wash, dry and continuous wash and dry cycl...
Page 6 - SAFETY AND WARNINGS
4 SAFETY AND WARNINGS ! WARNING! Electric Shock Hazard If you are using an extension cord or a portable electrical outlet device (eg multi-socket outlet box), ensure that it is positioned so that it does not come into contact with water or moisture. Failure to do so may result in death or electrical...
Page 7 - IMPORTANT SAFETY INSTRUCTIONS
5 SAFETY AND WARNINGS IMPORTANT SAFETY INSTRUCTIONS WARNING! When using your washer dryer, follow basic precautions, including the following: • CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external switching d...
Page 11 - INSTALLATION INSTRUCTIONS
9 Please read and follow the ‘Safety and warnings’ and ‘Installation instructions’ sections carefully before using your washer dryer! Accessories Please check you received the following accessories with your Fisher & Paykel washer dryer. You will find them inside the drum: ● ● 1 x Inlet hose ● ●...
Page 12 - located near each hole (; Installation location
10 INSTALLATION INSTRUCTIONS To remove the bolts: 1 Use a spanner or socket to unscrew and remove all four transit bolts at the back of the washer dryer ( A ). 2 Pull the black rubber grommets to remove the bolt, grommet and white plastic spacers from the machine. Keep the transit bolts in case they...
Page 14 - This machine must not be installed and operated on a plinth.
12 INSTALLATION INSTRUCTIONS IMPORTANT! This machine must not be installed and operated on a plinth. Levelling the machine It is IMPORTANT to level the machine to ensure good spin performance, and to minimise noise, vibrations and wear and tear on the washer dryer. 1 Before positioning the machine i...
Page 15 - Water supply requirements:
13 INSTALLATION INSTRUCTIONS Connecting to the water supply Inlet hose IMPORTANT! ● ● A new hose is provided with the washer dryer and should be used to connect the washer dryer to the water mains. ● ● Old hoses should not be re-used. ● ● We recommend that the inlet hose be changed every 5 years. WA...
Page 16 - Drain hose placement in a stand pipe or tub
14 INSTALLATION INSTRUCTIONS Draining Drain hose placement in a stand pipe or tub 1 To guide the drain hose over the tub or standpipe the hose guide must be fitted to the drain hose. The height of the standpipe or tub should be between 800 – 1200mm. 2 Secure the hose guide so it cannot become dislod...
Page 17 - Electrical connection; installing the washer.; Do not touch or operate the machine with wet hands or with bare-feet.; Hose Inlet Large Bore
15 INSTALLATION INSTRUCTIONS Electrical connection 1 This appliance must be connected to a 220V – 240V, 50Hz, sinusoidal, minimum 10A electrical supply. 2 Uncoil the power cord, remove and discard the plastic pin cover and plug into a wall socket. 3 Connect the appliance to an earthed outlet protect...
Page 18 - Completing the installation
16 INSTALLATION INSTRUCTIONS Completing the installation Installation test cycle IMPORTANT! Do this before you wash or dry any items in your washer dryer. This is to check that your washer dryer is installed and functioning correctly prior to use. 1 Turn your washer dryer on by pressing the ‘POWER’ ...
Page 19 - BEFORE YOU DO YOUR FIRST WASH; Have the packaging and transit bolts been removed?; dryer and YOUR MANUFACTURER’S WARRANTY WILL BE COMPROMISED.
17 BEFORE YOU DO YOUR FIRST WASH Before you start, it is a good idea to go through the following checklist: 1 Have the packaging and transit bolts been removed? 2 Is the drain hose threaded through the ‘U bend’ (with no more than 20mm extended) and hooked into your standpipe or tub, or attached to a...
Page 20 - GETTING STARTED QUICKLY
18 PUSH ● ● Sort your washing carefully. Separate white/light colours from dark colours. Wash new, highly coloured and dark coloured items separately to prevent dye transfer. Refer to the ‘Sorting and loading’ section. ● ● Load your clothes individually into the drum. Close the door. ● ● Use ‘ Top L...
Page 21 - Press ‘POWER’ to activate your washer dryer.; your expectations of wash and dry performance may not be met.
19 GETTING STARTED QUICKLY 1 Press ‘POWER’ to activate your washer dryer. 2 Select your wash or dry cycle by turning the SmartTouch™ Control Dial. 3 If you are wanting to perform a wash, dry or continuous wash and dry cycle touch the ‘Select’ button to change to the desired cycle functionality. 4 Ch...
Page 22 - WASHER DRYER CONTROLS; SmartTouchTM Control Dial
20 WASHER DRYER CONTROLS SmartTouch™ Control Dial The SmartTouch™ Control Dial provides easy and efficient wash and dry cycle selection. As you rotate the dial, the icon of the wash or dry cycle selected will be illuminated, while the default settings for that cycle will be illuminated on the right ...
Page 23 - Wash only
21 WASHER DRYER CONTROLS Time to go Your washer dryer displays approximately how many minutes are remaining in the cycle you are running, so that you can tell at a glance when your laundry will be finished. Please be aware that a number of factors can influence the overall cycle time, eg the water f...
Page 24 - SAFETY FEATURES; Door lock; Your washer also has the following protective measures:
22 SAFETY FEATURES Door lock The door of your washer dryer will lock once you touch until the machine beeps at the end of the cycle, ensuring safety for you and your family while your machine is operating. Simply touch , the machine will pause and the door will automatically unlock if the conditions...
Page 25 - SORTING AND LOADING; Sorting
23 SORTING AND LOADING When preparing your washer or dryer load there are some important things to consider: Sorting ● ● It is best that you sort your garments before placing them into the washer dryer. Sort into loads of similar items, and loads that will take similar times to dry. Always separate ...
Page 26 - SPECIFIC ITEM
24 SORTING AND LOADING SPECIFIC ITEM REQUIREMENTS SUGGESTED WASH/DRY CYCLE AND OPTIONS COMMENTS Towels. Wash: Towels, 1400 or 1100 rpm spin, 40°C, Wrinkle Free. Dry: Towels, Extra Dry, Wrinkle Free. Towels produce a lot of lint and are best dried on their own. Sheets, pillowcases, duvet/doona covers...
Page 27 - Before you load; Load items individually when performing a drying cycle.; To reduce creasing; Launder permanent press garments separately, eg business shirts.
25 SORTING AND LOADING Before you load ● ● Check pockets for items that could damage your clothes or get caught in the washer dryer. ● ● Close zippers, hooks and eyes, and other fastenings (ie fasten the opening of duvet/doona covers), and remove loose bra wires. All these can damage both your washe...
Page 29 - DETERGENT AND FABRIC SOFTENER; Liquid detergent
27 DETERGENT AND FABRIC SOFTENER Detergent type Your washer dryer requires low sudsing detergent to prevent oversudsing problems. Low sudsing detergent comes in powder , liquid or pod form and is labelled ‘ Top Loader/Front Loader ’, ‘ Low Suds ’, ‘ High Efficiency ’ or ‘ HE ’. Using any other deter...
Page 30 - Pods; . When you select ‘Pre Wash’, the pre wash compartment is flushed at; Detergent advice
28 DETERGENT AND FABRIC SOFTENER Pods Detergent pods are a ‘no mess’ alternative to powdered or liquid detergent. They must be placed at the back of the drum prior to loading your clothes. This will ensure they are activated quickly in the wash. Do not place pods in the detergent dispenser drawer or...
Page 31 - Fabric softener; If you wish to use fabric softener we recommend to:; Scrud
29 DETERGENT AND FABRIC SOFTENER Fabric softener Add fabric softener to the middle compartment of the dispenser marked with a . The washer dryer will automatically flush the fabric softener during the rinse part of the cycle. If you wish to use fabric softener we recommend to: 1 Use it sparingly. Me...
Page 32 - WASH AND DRY CYCLES
30 WASH AND DRY CYCLES Your washer dryer has a number of wash, dry and continuous wash and dry cycles to suit your laundering needs. Selecting the most appropriate cycle for each particular wash and dry load will help ensure you get the best wash and dry result. CYCLE DESIGNED FOR DESCRIPTION Everyd...
Page 34 - WASH AND DRY CYCLE OPTIONS; and select your new setting, then touch; Wash Temp; Your washer dryer offers five wash temperatures:; Spin Speed
32 WASH AND DRY CYCLE OPTIONS All wash and dry cycles default to the recommended options for that cycle based on the average load expected to be washed. You can vary the options (eg ‘Wash Temp’, ‘Spin Speed’) to create your desired cycle. Note: some options are not available on some cycles, for clot...
Page 35 - Options; Pre Wash
33 WASH AND DRY CYCLE OPTIONS Options Pre Wash For extra dirty loads you can perform a ‘Pre Wash’. Your washer dryer will start the wash with a short wash in cool water to remove excess soil. After this the machine will drain and then fill with the selected temperature for the main wash. Simply touc...
Page 36 - Dryness Level; button and time to go will flash. Wait until you
34 WASH AND DRY CYCLE OPTIONS Dryness Level Your washer dryer takes the guess work out of choosing drying times by sensing the dryness of the load. When your washer dryer senses that the clothes have dried to the dryness level you have selected, the washer dryer will automatically enter the cool dow...
Page 37 - Keylock; To turn ‘Keylock’ mode ON or OFF when the washer dryer is powered on:; Delay Start
35 WASH AND DRY CYCLE OPTIONS Keylock This option enables you to deactivate the buttons on the display panel, except for the ‘POWER’ and ‘Keylock’ buttons. This prevents accidental button presses. To turn ‘Keylock’ mode ON or OFF when the washer dryer is powered on: ● ● Touch and hold the button for...
Page 38 - CUSTOMISING WASH AND DRY CYCLES; To customise a cycle:; Factory reset
36 CUSTOMISING WASH AND DRY CYCLES After using your washer dryer a few times you may discover there are some wash or dry options you prefer for some cycles. You can programme your washer dryer to remember the wash and dry options you prefer for each cycle. For instance, you may want to set the ‘Ever...
Page 39 - CARING FOR YOUR WASHER DRYER; When you have finished using your washer dryer; Unplug the machine from the power socket.; Cleaning your washer dryer; Cleaning the control panel and outer surfaces of the washer dryer; Cleaning the inside of your washer dryer
37 CARING FOR YOUR WASHER DRYER When you have finished using your washer dryer ● ● Unplug the machine from the power socket. ● ● Wipe around the door and in the rubber gasket to remove any remaining water/condensation, lint and foreign matter. ● ● Turn off the taps to prevent the chance of flooding ...
Page 40 - Cleaning the drum and the door
38 CARING FOR YOUR WASHER DRYER Cleaning the drum and the door ● ● Use a soft damp cloth to wipe the door, cleaning any water marks or residue off it. ● ● Wipe the rubber seal around the door. Remove any items or lint accumulating in the bottom of the seal catchment and wipe out any water accumulate...
Page 41 - Cleaning the hose; remember to replace the transit bolts before moving it.; These will protect internal; washer dryer so they cannot be accidentally trapped inside it.
39 CARING FOR YOUR WASHER DRYER Cleaning the hose The hose has a filter in it, preventing any solid contaminants in the water entering your washer dryer. Occasionally you should disconnect the water inlet hose where it connects to the taps, check for any build up of dirt and wash this out. Nappy san...
Page 42 - BEFORE YOU CALL FOR SERVICE; User warnings; Water is not
40 BEFORE YOU CALL FOR SERVICE User warnings Your washer dryer is capable of diagnosing a number of its own problems. It will sound a continuous series of beeps and display a code when it has a problem that you can correct yourself. All control panel lights will turn off and the code will be display...
Page 43 - PROBLEM; Machine is
41 BEFORE YOU CALL FOR SERVICE PROBLEM DISPLAYED AS WHAT TO DO Machine is too hot. The temperature in the drum is over 60°C therefore it is not safe to open the door. Wait until the temperature drops below 60°C then the machine will open the door. Door is locked. The temperature in the drum is over ...
Page 44 - FAULT CODES; panel and a number appears on the display, a fault has occurred.
42 FAULT CODES When a continuous series of beeps is sounded, all the lights turn off on the control panel and a number appears on the display, a fault has occurred. The washer dryer will automatically enter this mode if a fault occurs. The fault code will be displayed as followed by a number on the ...
Page 45 - TROUBLESHOOTING; Solving general operating problems; Washer dryer not
43 TROUBLESHOOTING The following is a list of problems you may encounter when using this appliance and some suggestions that may help to correct the problem. If you still have problems, please contact your Fisher & Paykel trained and supported service technician. Solving general operating proble...
Page 46 - Power or water failure.
44 Solving general operating problems PROBLEM POSSIBLE CAUSES WHAT TO DO Washer dryer stops working mid cycle. The washer dryer has detected a fault. Refer to pages 40 – 42. Power or water failure. Check the power and/or water is working correctly. Washer dryer has been paused. Touch the button to c...
Page 47 - Machine is not level.
45 TROUBLESHOOTING Solving general operating problems PROBLEM POSSIBLE CAUSES WHAT TO DO Not spinning properly. Load has gone out of balance. Open door and redistribute load, then restart the washer dryer. Machine is not level. Ensure machine is correctly levelled (refer to page 12). Suds build up. ...
Page 48 - Solving washer problems
46 TROUBLESHOOTING Solving washer problems PROBLEM POSSIBLE CAUSES WHAT TO DO Washer dryer drains while filling. Drain hose too low. Ensure the height of the drain hose is at least 800mm from the floor level (refer to page 14). Drain hose sitting in water. Clear the drain. Washer dryer is not draini...
Page 49 - Too many soap
47 TROUBLESHOOTING Solving washer problems PROBLEM POSSIBLE CAUSES WHAT TO DO Too many soap suds. Incorrect type of detergent used. Use low sudsing, front loader detergent only (refer to page 27). Too much detergent used. Ensure the correct dose of detergent is used for the load size and soil level ...
Page 50 - Solving dryer problems; Dryer does not
48 TROUBLESHOOTING Solving dryer problems PROBLEM POSSIBLE CAUSES WHAT TO DO Dryer does not heat. Dryer set to ‘Air Dry’ cycle. Check what cycle the dryer is set to, change to the preferred cycle (refer to pages 30 – 34). The dryer has progressed to cool. The dryer will progress and display (refer t...
Page 51 - Loads not sorted correctly.
49 TROUBLESHOOTING Solving dryer problems PROBLEM POSSIBLE CAUSES WHAT TO DO Linting. Washer dryer is overloaded. Remove some items from the washer dryer, cycles have certain capacity limitations (refer to pages 30 and 31). Loads not sorted correctly. Dry lint givers separately from lint receivers. ...
Page 52 - Washer dryer overloaded.
50 TROUBLESHOOTING Solving dryer problems PROBLEM POSSIBLE CAUSES WHAT TO DO Creasing. Washer dryer overloaded. Do not overload washer dryer. Incorrect cycle for load type. Use specified cycle for particular load type and add on ‘Wrinkle Free’ option to your cycle. Spin speed too fast. Select a slow...
Page 53 - CONSUMPTION DATA TABLE
51 CONSUMPTION DATA TABLE MODEL CYCLE TEMP. (⁰C) LOAD (kg) PROGRAMME TIME ON DISPLAY (min) REMAINING MOISTURE CONTENT (%) ENERGY CONSUMPTION (kWh/CYCLE) WATER CONSUMPTION (L/CYCLE) WD8060P1 Cottons Eco* 60 8 229 46 0.94 57 Cottons 40 8 142 58 1.06 73 Everyday 40 7 64 47 0.67 70 Heavy 60 7 135 61 1.6...
Page 54 - PRODUCT FICHE ACCORDING TO; Washing capacity (kg) for standard 60 cotton washing cycle
52 PRODUCT FICHE ACCORDING TO COMMISSION DELEGATED REGULATION (EU) 96/60/EC Fisher & Paykel MODEL WD8060P1 Energy efficiency class on a scale from A (most efficient) to G (low efficient) B Energy consumption for washing, spinning and drying, in kWh per complete operating cycle using standard 60 ...
Page 55 - MANUFACTURER’S WARRANTY; These Manufacturer’s Warranties DO NOT cover
53 MANUFACTURER’S WARRANTY You automatically receive a 2 year Manufacturer’s Warranty with the purchase of this washer dryer covering parts and labour for servicing within the country of purchase. Fisher & Paykel undertakes to: Repair or, at its option, replace without cost to the owner either f...
Page 56 - For Australian customers; Please keep this user guide in a safe place.
54 MANUFACTURER’S WARRANTY F Repairs when the appliance has been dismantled, repaired or serviced by other than a Fisher & Paykel trained and supported service technician or the selling dealer. G Pick-up and delivery. H Transportation or travelling costs involved in the repair when the product i...
Page 57 - CUSTOMER CARE; Your product is correctly installed.; In New Zealand if you need assistance...*; If you need service...*; In Australia if you need assistance...*; Fisher & Paykel Appliances Australia Pty Ltd, PO Box 798, Cleveland
55 CUSTOMER CARE Before you call for service or assistance... Check the things you can do yourself. Refer to your user guide and check: 1 Your product is correctly installed. 2 You are familiar with its normal operation. 3 You have read the ‘Before you call for service’, ‘Fault codes’ and ‘Troublesh...
Page 59 - WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE); The symbol
57 EUROPEAN DIRECTIVE 2012/19/EU ON WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE) This appliance is marked according to the European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE). By ensuring this product is disposed of correctly, you will help prevent potential negativ...
Page 60 - NZ AU GB
429646 A 04.17 www.fisherpaykel.com © Fisher & Paykel Appliances 2017. All rights reserved. The product specifications in this booklet apply to the specific products and models described at the date of issue. Under our policy of continuous product improvement, these specifications may change at ...
