Fisher & Paykel BI601 - Manual
Fisher & Paykel BI601 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – BUILT-IN OVEN INSTALLATION INSTRUCTIONS; the Cooktop as per the Cooktop Manufacturer's Instructions.; Flush Fitting
- Page 3 – Height Recommendation Guide
- Page 11 – TYPE; CT6552S Control Box Installation; Cooktop Cutout Dimensions; MINIMUM DEPTHS
Page 1
IMPORTANT!
PLEASE MAKE THIS INFORMATION AVAILABLE TO YOUR JOINER AS IT
COULD REDUCE YOUR INSTALLATION COST.
Fisher & Paykel
INSTALLATION INFORMATION
Built-In Ovens
BI601 Series - Built-In Oven
BI601D Series - Built-In Double Oven
BI601XC2 Series - Built-In Oven/Microwave Combination
BI451 Series - Built-In Compact Oven
CAUTION: In order to avoid a hazard these appliances must be installed
according to these Installation Instructions.
Please follow installation information carefully.
If in doubt consult your local building authority by-laws.
BEFORE YOU START
DO
Ensure a suitable disconnection switch is incorporated in the permanent wiring,
mounted and positioned to comply with the local wiring Rules and Regulations.
DO
Ensure that the location of the Oven connection socket is outside the installation
space if the appliance is flush to the rear wall.
DO
Ensure the benchtop and the Oven cavity are square and level.
DO
Ensure the electrician allows as least 1.5m free length of connection cable within the
cavity for ease of installation and service of the Oven.
DO
Use easy to clean finishes for the wall surfaces surrounding the Oven and Cooktop to
aid removal of any cooking fume staining resulting from use of the Oven and
Cooktop.
DO
Ensure that the interconnection cord between the Cooktop and the Oven is not
accessible via cupboard doors after installation. This applies to any extension cords as
well, even though they are double insulated.
DO
Consult local building authorities and by-laws if in doubt regarding installation.
DO
Check the height from the floor suits the user.
DO
Ensure the cavity is a completely sealed box with no gaps. This will ensure the
cooling air flows under the product to give the correct venting and cooling for the
oven and cabinet surround.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 2 BUILT-IN OVEN INSTALLATION INSTRUCTIONS 1. Check that the kitchen cavity is square and within the limits in the INSTALLATION DIMENSIONS. 2. Lift oven and slide into place. Secure Oven in cavity using 4 'wood screws' and washers supplied through enamelled frame at either side of oven as shown ...
Page 3 Height Recommendation Guide Figures are based on an average height of 1650mm (5'5") wearing shoes. The height of the product may vary + 50mm according to the height of the most frequent user.
COOKTOP DIMENSIONS CLAMPING DOWN COOKTOP TYPE LENGTH WIDTH DEPTH Place the cooktop into the cutout CT560X 578mm 511mm 51mm and tighten with the supplied clamps. CT560C 578mm 511mm 51mm CT5602F 578mm 511mm 51mm These will cope with bench thickness CT2802 289mm 511mm 55mm 15-50mm. CT6552S (Cooktop) 57...
