Fisher & Paykel CG913 - Manual

Page 3 - Contents; SAVE THESE INSTRUCTIONS

Contents Introducing your cooktop 2 TITAN MODELS (CG913 Series) Temperature control 3 Flame failure reignition system 4 Accessories 4 JET MODELS (CG602 & CG902 Series) Temperature control 6 Flame failure safety feature 7 Accessories 8 Hints and tips 10 Troubleshooting 11 Care and cleaning 12 Saf...

Page 4 - Introducing your cooktop; First use

Introducing your cooktop Now that your new cooktop is installed and ready to use, you will want to know everything about it to ensure excellent results right from the start. This booklet will introduce you to the features and special talents of your cooktop. We recommend you read the whole book befo...

Page 5 - Temperature control; If the cooktop does not light

Temperature control 1 Choose the control knob for the burner you want to use. 2 Press down gently and turn the knob anticlockwise to the high position. You do not need to hold the knob down. 3 All electrodes will spark until the selected burner ignites. Note: For the first burner selected there is a...

Page 6 - Flame failure reignition system; Power failure; Accessories; Using a wok

Flame failure reignition system In the event of the flame being accidentally blown out, the flame failure reignition system will detect this, and the electrode will spark and relight the flame. If no flame is detected after about five seconds, the gas supply to the appliance will be shut off and the...

Page 9 - Flame failure safety feature

Flame failure safety feature Some cooktops have a flame failure safety thermocouple fitted (see previous diagram). When lighting the burner on flame failure models, hold the knob down for five seconds after the burner has lit. Releasing the burner knob too soon will extinguish the flame. In the even...

Page 12 - Hints and tips

Hints and tips To get the best out of your cooktop follow these simple suggestions. Do not use an asbestos mat between the flame and the saucepan as this may cause serious damage to your cooktop. Never use plastic or aluminium foil dishes on the burners. Saucepans should have thick flat bottoms. Foo...

Page 13 - Troubleshooting; Problem

Troubleshooting Problem Possible solutions My cooktop does not light Check the cooktop is plugged in and the power is switched on. The gas electrodes may be dirty. These can be easily cleaned with a toothbrush and methylated spirits. The burner parts may not be located properly. Check the assembly a...

Page 14 - Care and cleaning

Care and cleaning Clean regulary – do not let stains become burnt on. Use soapy water and a soft sponge or cloth (use the mildest cleaner that will do the job). Rinse with clean water to ensure no cleaner residue is left (when heated this can stain the cooktop). Dry thoroughly to avoid leaving water...

Page 16 - Safety and warnings

Safety and warnings WARNING! Hot Surface Hazard This appliance becomes hot during use. Care should be taken to avoid touching cooktop components, burners, pan supports and stainless steel base. WARNING! Household appliances are not intended to be played with by children. Children, or persons with a ...

Page 18 - Warranty; Fisher & Paykel undertakes to

Warranty When you purchase any new Fisher & Paykel whiteware product you automatically receive a two year Manufacturer’s Warranty covering parts and labour for servicing. Fisher & Paykel undertakes to Repair or, at its option, replace without cost to the owner either for material or labour a...

Page 19 - Customer Care; In New Zealand

Customer Care Check the things you can do yourself. Refer to your user guide and check: 1 Your appliance is correctly installed 2 You are familiar with its normal operation If after checking these points you still need assistance please refer to the following: In New Zealand If you need assistance.....

Page 20 - Notes

Fisher & Paykel CG913 - Manual

Table of Contents:

Summary

Other Fisher & Paykel Models