Faber LITHOS CONCRETE - User Manual

Page 3 - TR

3 3 IÇERIKLER TAVSIYELER VE ÖNERILER.............................................................................................................................................. 64 ÖZELLIKLER...............................................................................................................

Page 4 - EN; RECOMMENDATIONS AND SUGGESTIONS; INSTALLATION

EN 4 4 RECOMMENDATIONS AND SUGGESTIONS The Instructions for Use apply to several versions of this appliance. Accordingly, you may find descriptions of individual features that do not apply to your specific appliance. INSTALLATION • The manufacturer will not be held liable for any damages resulting f...

Page 5 - USE

EN 5 5 • If the instructions for installation for the gas hob specify a greater distance specified above, this has to be taken into account. Regulations concerning the discharge of air have to be fulfilled. • Use only screws and small parts in support of the hood. Warning : Failure to install the sc...

Page 6 - : Accessible parts may become hot when used with cooking; MAINTENANCE; any maintenance work.

EN 6 6 • “ CAUTION : Accessible parts may become hot when used with cooking appliances.” MAINTENANCE • Switch off or unplug the appliance from the mains supply before carrying out any maintenance work. • Clean and/or replace the Filters after the specified time period (Fire hazard). • The Grease fil...

Page 7 - CHARACTERISTICS; Components

EN 7 7 CHARACTERISTICS 450 3 8 0 4 3 0 126 8 1 41.5 300 260 62.5 3 4 0 * * M IN 4 6 0 - M A X 6 6 0 * M IN 3 4 0 - M A X 6 6 0 4 0 0 * * M IN 8 7 5 - M A X 1 0 7 5 * M IN 7 5 5 - M A X 1 0 7 5 6 6 * Dimensions of the hood in ducting version. ** Dimensions of the hood in recycling version. Components...

Page 8 - Drilling the Wall

EN 8 8 INSTALLATION Drilling the Wall 3 7 3 1 0 5 150 150 12a Mark the following on the wall: • a vertical line up to the ceiling or surface above the hood, at the centre of the area in which the hood itself is to be fitted; • a horizontal line at: 650 mm min. above the Hob; • Rest the Bracket 7.2.1...

Page 9 - Mounting the hood body; Connections

EN 9 9 Mounting the hood body • Remove the metal grease filters by turning the handles pro- vided. • Adjust the two screws Vr , on brackets 11a , to a minimum. • Hook the hood canopy onto the two brackets 11a. • From inside the hood canopy, adjust the screws Vr to set the Hood Canopy level. • Tighte...

Page 10 - Chimney Assembly

EN 1 10 ELECTRICAL CONNECTION • Connect the hood to the mains through a two-pole switch hav- ing a contact gap of at least 3 mm. • Remove the grease filters (see paragraph Maintenance) being sure that the connector of the feeding cable is correctly inserted in the socket placed on the side of the fa...

Page 11 - Control panel

EN 1 11 USE T2 T1 L T3 Control panel BUTTON LED FUNCTIONS T1 Speed On Turns the Motor on at Speed one. Turns the Motor off. T2 Speed On Turns the Motor on at Speed two. T3 Speed Fixed When pressed briefly, turns the Motor on at Speed three. Flashing Pressed for 2 Seconds. Activates Speed four with a...

Page 12 - Grease filters; Activated charcoal filter (Recirculation version)

EN 1 12 MAINTENANCE Grease filters CLEANING METAL SELF- SUPPORTING GREASE FILTERS • The filters must be cleaned every 2 months of operation, or more frequently for particularly heavy usage, and can be washed in a dishwasher. • Remove the filters one at a time by pushing them towards the back of the ...

Page 14 - FR; CONSEILS ET SUGGESTIONS; • La distance de sécurité minimum entre le plan de

FR 1 14 CONSEILS ET SUGGESTIONS Les instructions pour l’utilisation se réfèrent aux différents modèles de cet appareil. Par conséquent, certaines descriptions de caractéristiques particulières pourraient ne pas appartenir spécifiquement à cet appareil. INSTALLATION • En aucun cas le fabricant ne peu...

Faber LITHOS CONCRETE - User Manual

Table of Contents:

Summary

Other Faber Range Hoods Models