EverFocus EQ610 - Manual
EverFocus EQ610 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – TABLE OF CONTENTS; NAMES AND FUNCTIONS OF PARTS; CAMERA SETUP OPERATIONS
- Page 4 – Color without compromise:; or; Package Contents
- Page 6 – The light sensor is for
- Page 7 – connections
- Page 8 – Terminal Block; If
- Page 11 – CONNECTION; The EQ610 is programmed using Pelco D type protocol
- Page 17 – Select the shutter mode by pressing the LEFT or RIGHT button.; Note: AGC must be on for sense-up low light boost to function.; When selecting a
- Page 20 – Return; switching function
- Page 22 – save all the setting menus and exit.
- Page 23 – Choose “END”; save all the menu settings and exit.
- Page 26 – EverFocus Electronics Corp.
1/3”
Color Day/Night
plus Wide Dynamic Range
Box Style Camera
Operation Instructions
Model No.
EQ610
Please read this manual first for correct installation and operation. This manual should be retained for future
reference. The information in this manual was current when published. The manufacturer reserves the right
to revise and improve its products. All specifications are therefore subject to change without notice.
PRECAUTIONS
1. Do not install the camera near electric or magnetic fields.
Install the camera away from TV/radio transmitters, magnets, electric motors, transformers and audio
speakers since the electromagnetic fields generated from these devices may distort the video image.
2. Never disassemble the camera beyond the recommendations in this manual nor introduce
materials other than those recommended herein.
Improper disassembly or introduction of corrosive materials may result in equipment failure or other
damage.
3. Try and avoid facing the camera toward the sun.
In some circumstances, direct sunlight may cause permanent damage to the sensor and/or internal
circuits.
4. Keep the power cord away from water and other liquids and never touch the power cord with
wet hands.
Touching a wet power cord with hands or touching the power cord with wet hands may result in electric
shock.
5. Never install the camera in areas exposed to water, oil or gas.
Water, oil or gas may result in equipment failure, electric shock or, in extreme cases, fire.
6. Cleaning
Do not touch the surface of the sensor directly with the hands. Use a damp soft cloth to remove any
dirt from the camera body. Use lens tissue or a cotton tipped applicator and ethanol to clean the sensor
and the camera lens. Please do not use complex solvents, corrosive or abrasive agents for cleaning.
7. Do not operate the camera beyond the specified temperature, humidity or power source ratings.
Use the camera at temperatures within 0
℃
~ 50
℃
(32
℉
~122
℉
)
and humidity between 20~80%.
The input power source is 12VDC/24VAC ; 100~240VAC or 12VDC only.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
- 1 - TABLE OF CONTENTS 1. PRODUCT OVERVIEW ............................................................................................................... 3 1.1 Main Features ...............................................................................................................................
- 3 - 1. PRODUCT OVERVIEW Amazing color low light sensitivity of .05 lux before the added benefits of digital signal processing technology, delivered by a 1/3” Sony Super HAD II sensor, is just the beginning with the new EverFocus EQ610. Color without compromise: 560TVL resolution, your choice of fu...
- 5 - 2. NAMES AND FUNCTIONS OF PARTS 2.1 Front panel The light sensor is for optional control of D/N switching levels in some applications. See section 5.6 for details. 2.2 Top/Bottom Mounting Using the two phillips head screws provided, the mounting bracket may be mounted to the top of the camera ...
