EverFocus EAN850A - Manuals

EverFocus EAN850A – Manual in PDF format online.

Manuals:

Manual

Manual EverFocus EAN850A

Summary

Page 4 - Terms and Trademark

EAN850A 4 Do not operate the appliance beyond its specified temperature, humidity or power source ratings. Do not use the appliance in an extreme environment where high temperature or high humidity exists. Use the appliance at temperature within 0 ℃ ~ +40 ℃ / 32 ~ 104 and a humidity below 90%. The i...

Page 5 - TABLE OF CONTENTS

EAN850A 5 External Dimensions: 56 mm x 68 mm x 101 mm / 2.24” x 2.72” x 4.04” TABLE OF CONTENTS 1. INTRODUCTION.................................................................................................... 7 2. FEATURES .............................................................................

Page 8 - ACCESSING THE CAMERA MENU; Press

EAN850A 8 3. ACCESSING THE CAMERA MENU Step 1.Start an Internet Explorer browser. Step 2. Enter the IP address or host name of the camera in the Location/Address field of your Internet Explorer browser. (Please refer to EAN850A Installation Guide for how to find the IP address) Step 3. Input “Userna...

Page 12 - Click this button to display the setup menu.

EAN850A 12 4. SETTING Click this button to display the setup menu. 4.1 System Info System information and system log check of the setup menu can be performed on this page. The “System Info” page has 2 tabs: [Information] tab and the [Log] tab. 4.1.1 Information System Information: Firmware version, ...

Page 13 - : displaying date and time of the log.; Log message

EAN850A 13 4.1.2 Log System Log: Date/Time : displaying date and time of the log. Log message : all information and event message, including login, user’s IP, reboot, firmware upgrade, load factory default, configuration reset and event detected. System will keep the newest 256 records.

Page 16 - Apply; to apply the setting changes or; Reset; to reset without saving the

EAN850A 16 Press Apply to apply the setting changes or Reset to reset without saving the change. 4.3 Network The network settings and the settings relating to Network, DDNS, Bandwidth, SMTP/FTP and Network Alarm can be configured on this page. The "Network setup" page has 5 tabs of the [Netw...

Page 17 - IP SETTING; IP Type; An IP address of DNS server that is provided by ISP.

EAN850A 17 • Subnet mask • Gateway (when using the gateway server/router) • Primary DNS, Secondary DNS (when using DNS) • HTTP Port IP SETTING IP Type DHCP: Configure the DHCP server not to assign the same IP addresses used for the other network cameras and PCs whose IP address is unique. Refer to t...

Page 19 - button to register or update DDNS account.

EAN850A 19 4.3.2 DDNS DDNS setting When accessing the camera via the Internet from the network environment of which the global IP address is obtained using DHCP, the DDNS function is necessary. To use the DDNS function, it is necessary to connect to the dedicated DDNS server. We offer 4 DDNS server ...

Page 21 - to separate address.

EAN850A 21 4.3.4 SMTP/FTP Set SMTP The settings relating to the mail server used to send the e-mail notification from the camera to predefined addresses via SMTP can be configured. SMTP Server: Enter the IP address or the host name of the SMTP server used to send e-mails . SMTP Port: Enter the port ...

Page 29 - When the object’s surroundings have a high color temperature.

EAN850A 29 present illumination. If the environment and the light source are changed, you need to adjust the white balance again. Ö MANUAL: The manual adjustment mode enables a more precise adjustment. Please select ATW or AWC first. Then change to manual adjustment mode and press the SET button. Se...

Page 32 - Press SET button when you finish all the settings.; be adjusted by pressing the mini-joystick in “AUTO” mode.

EAN850A 32 ~x128. 1. Please direct the arrow to point to “SENS UP” on the SETUP menu by using the UP and DOWN buttons. 2. Select the mode you would like to operate by pressing the LEFT or RIGHT button. Ö AUTO: Low light level auto mode. Default value is AUTO (Up to X 10). Ö OFF: The function is disa...

Page 38 - Please select ON mode for the chosen area.

EAN850A 38 z Please select the area you would like to cover from the 4 areas in AREA SEL mode. z Please select ON mode for the chosen area. z Please select AREA TONE for cover area color. The smaller the number, the darker the color. z Please use the UP or DOWN button to move between TOP, DOWN, LEFT...

Page 40 - Please press the SET button.

EAN850A 40 5. Increase LEFT scale value by 20. AREA1 position after change is: TOP: 30, DOWN: 45, LEFT: 40 and RIGHT: 60. z In order to save the changes and complete the setting, press the SET button. This allows you to return to the previous menu. 4.4.2.8.6 MIRROR -ON: Sets a horizontal image 180 a...

Page 42 - Enable Audio; box to enable audio function.

EAN850A 42 4.5 Audio The EAN850A camera can transmit audio to other clients using a built-in microphone or connecting to external microphone to play audio received from other clients via connected speakers. This section describes how to configure the basic audio settings. Audio Check Enable Audio bo...

Page 44 - record event video to remote site.

EAN850A 44 4.7 EVENT An event in the camera is when an Event Type is activated and causes certain actions to be performed. The event type is the set of conditions that specifies how and when which actions will be performed. This table describes how to setup action types and event type. Event Type Ac...

Page 45 - Enable

EAN850A 45 4.7.1 Event The settings relating to event occurrences such as settings for the event occurrence, motion, alarm and time mask can be configured on this page. The "Event " page has 4 tabs: [Event] tab, the [Motion] tab, the [Alarm] tab and the [Time Mask] tab. Press button to add a...

Page 48 - checkbox to enable event action.; Sensitivity; level for motion triggered by selecting from

EAN850A 48 There are 5 motion trigger areas, which can be distinguished by 5 different colors. Check Enable checkbox to enable event action. For each of them, you can set the event action to be activated. Event action can be set in “Event” section. Moreover, you can set the Sensitivity level for mot...

Page 53 - Enable Daylight Saving; checkbox to enable daylight saving.

EAN850A 53 4.8.2 Daylight Saving Set Daylight Saving Check Enable Daylight Saving checkbox to enable daylight saving. Set the start time to daylight saving time. Set the start week of daylight saving time: 1 st / 2 nd / 3 rd / 4 th / Last Set the start date of daylight saving time: Sunday / Monday /...

Page 57 - the; Load; button to search firmware file. Press; Upgrade; button to upgrade the

EAN850A 57 the Load button. The settings will be restored to the previous configuration. Upgrade Firmware Upgrade the EAN850A with the latest firmware. Press Browse button to search firmware file. Press Upgrade button to upgrade the firmware. Note 1: Do not disconnect power to the unit during the up...

Page 60 - EverFocus Electronics Corp.; EverFocus

EAN850A 60 EverFocus Electronics Corp. Head Office: 12F, No.79 Sec. 1 Shin-Tai Wu Road, Hsi-Chi, Taipei, Taiwan TEL: 886-2-26982334 FAX: 886-2-26982380 www.everfocus.com.tw USA Office: 1801 Highland Ave. Unit A Duarte, CA 91010, U.S.A. TEL: +1-626-844-8888 FAX: +1-626-844-8838 www.everfocus.com USA ...