EverFocus EPHD04+ - Manual

EverFocus EPHD04+

EverFocus EPHD04+ – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
23 Page 23
24 Page 24
25 Page 25
26 Page 26
27 Page 27
28 Page 28
29 Page 29
30 Page 30
31 Page 31
32 Page 32
33 Page 33
34 Page 34
35 Page 35
36 Page 36
37 Page 37
38 Page 38
39 Page 39
40 Page 40
41 Page 41
42 Page 42
43 Page 43
44 Page 44
45 Page 45
46 Page 46
47 Page 47
48 Page 48
49 Page 49
50 Page 50
51 Page 51
52 Page 52
53 Page 53
54 Page 54
55 Page 55
56 Page 56
57 Page 57
58 Page 58
59 Page 59
60 Page 60
61 Page 61
62 Page 62
63 Page 63
64 Page 64
65 Page 65
66 Page 66
67 Page 67
68 Page 68
69 Page 69
70 Page 70
71 Page 71
72 Page 72
73 Page 73
74 Page 74
75 Page 75
76 Page 76
77 Page 77
78 Page 78
79 Page 79
80 Page 80
81 Page 81
82 Page 82
83 Page 83
84 Page 84
85 Page 85
86 Page 86
87 Page 87
88 Page 88
89 Page 89
90 Page 90
91 Page 91
92 Page 92
93 Page 93
94 Page 94
95 Page 95
96 Page 96
97 Page 97
98 Page 98
99 Page 99
100 Page 100
101 Page 101
102 Page 102
103 Page 103
104 Page 104
105 Page 105
106 Page 106
107 Page 107
108 Page 108
109 Page 109
110 Page 110
111 Page 111
112 Page 112
113 Page 113
114 Page 114
115 Page 115
116 Page 116
117 Page 117
118 Page 118
119 Page 119
120 Page 120
121 Page 121
122 Page 122
123 Page 123
124 Page 124
125 Page 125
126 Page 126
127 Page 127
128 Page 128
129 Page 129
130 Page 130
131 Page 131
132 Page 132
133 Page 133
134 Page 134
135 Page 135
136 Page 136
137 Page 137
138 Page 138
139 Page 139
140 Page 140
141 Page 141
142 Page 142
143 Page 143
144 Page 144
145 Page 145
146 Page 146
Page: / 146

Table of Contents:

  • Page 2 – E V E R F O C U S E L E C T R O N I C S C O R P O R A T I O N; User’s Manual
  • Page 3 – ii; Safety Precautions; Do not block the ventilation openings or slots on the cover.; Read Instructions
  • Page 5 – iv; Federal Communication Commission Interference Statement; WEEE
  • Page 6 – TABLE OF CONTENTS
  • Page 7 – vi
  • Page 8 – vii
  • Page 11 – Front Panel; Description
  • Page 12 – Status LED
  • Page 13 – Rear Panel; Connects to an external eSATA storage device.
  • Page 14 – Optional Devices; EHA-FRX Optical Fiber Receiver
  • Page 15 – Installation; Coaxial Cable Preparation; Coaxial Cable Requirement; Low quality cable may produce higher attenuation.; Chapter
  • Page 16 – Hard Disk Installation; Find the four copper pillars for screwing the HDD brackets.
  • Page 19 – Basic Connection; powering on the DVR. Please refer to 2.2 Hard Disk Installation.
  • Page 20 – Cable Length Extension; Using the EHA-FTX/FRX HDcctv to Optical Fiber Converter
  • Page 21 – Monitor Connection; Do not exceed the max. HDMI cable length of 15 meters.
  • Page 22 – Alarm Input; GND; Alarm Input Contacts
  • Page 23 – Turning On / Off the Power
  • Page 24 – Accessing the DVR; Find Devices
  • Page 25 – Set IP Address; to save the settings.; Save Configuration; To access the DVR, highlight the DVR and click; Connect to Selected IP; Explorer window pops up.; ActiveX; click; Yes
  • Page 26 – Connecting the DVR to the Network; There are three methods to connect the DVR to the network:; Router or LAN Connection
  • Page 28 – from a different location over the Internet, see below.; To set the DVR for Internet Connection through router:
  • Page 29 – Direct High-Speed Connection; Connection Procedure:; Log into the EverFocus DVR menu and go to the Network Setting Menu.
  • Page 31 – Go to; Start; Click; Network and Internet Connection; Click Network Connections.
  • Page 32 – Local Area Connection; and select; Click on; Properties; Select; Use the following IP address; Restart both of the computer and the DVR.
  • Page 33 – Mouse and Front Panel Button Operation; There are three ways to control the OSD menu of the EPHD04+: with a; Mouse; , or the supplied handheld; IR Remote Control; . For details on the IR remote control, please; USB Mouse Operation; How to Select a Channel /Enable Audio; at; OSD Root Menu; Click on any icon to enter to the setup menus.
  • Page 34 – Field Input Options; Space
  • Page 35 – Front Panel Buttons Operation; Front Panel Review
  • Page 37 – General Operation; Login; To input the password by:
  • Page 38 – Camera Selection
  • Page 39 – Audio Selection; Record Audio
  • Page 42 – PTZ
  • Page 44 – Express Control of PTZ
  • Page 45 – Channel Switching; Channel; Display
  • Page 46 – Reverse; and; Forward; buttons
  • Page 48 – Archiving the Recordings or Log Data to the USB or DVD; Copy
  • Page 49 – Logout; You can log out the DVR by clicking the Logout icon
  • Page 50 – Temporarily Logout
  • Page 51 – Playback; To set up the start time of the recording, on the OSD menu, check the; Quick Playback; box to
  • Page 52 – Playback Bar
  • Page 54 – Searching the Recordings for Playing Back
  • Page 55 – Time Search; Click to bring up the on-screen keyboard to select the date.
  • Page 56 – Event Search
  • Page 57 – Smart Search; Click to bring up the on-screen clock to select the start / end time.
  • Page 59 – Snapshot Search; Click to search forward / backward based on the setup time above.; Search
  • Page 60 – Previous
  • Page 61 – or the supplied; . The following operations are examples of using; Configuration; button
  • Page 63 – Express
  • Page 65 – Camera Settings; Basic Setting
  • Page 66 – On; and then enter an
  • Page 67 – Motion; Normal Speed
  • Page 70 – Video Loss; Select a camera to be configured.
  • Page 71 – Timeout; or
  • Page 72 – Record Settings; Record; Click the button to apply the same settings to the desired cameras.; Record Status Relay Output:; Select a number to monitor the recording status of the selected
  • Page 74 – Play; You can set up the Quick Playback start time in this menu.; Playback from X seconds ago:; Set up a time between 60 and 3600 seconds for the playback
  • Page 75 – Alarm; Select an Alarm input number from 1 to 4.; Check the box to enable the buzzer when an alarm event is triggered.
  • Page 77 – Event
  • Page 82 – Check the box to record alarm events to log data.
  • Page 84 – Schedule Setting; Express Setup; Holiday
  • Page 85 – Holidays
  • Page 86 – Schedule
  • Page 87 – : Select the “Schedule’ icon on the configuration menu and; Enter camera selection mode; : Use the Jog wheel to switch to Camera selection mode.
  • Page 88 – Selecting camera; selected camera number will be highlighted by a blue frame.; Enter time bar editing mode; : Use the Jog wheel to switch to; time bar editing mode; : Press the “Enter” button the first time bar will be
  • Page 89 – : Use the Jog wheel to switch to the first; Edit Timezone; ” button to edit the recording parameters for a time zone.
  • Page 90 – Editing Timezone; Displays time zone start time.; Action; and Network Alarm) when an event occurs.
  • Page 91 – Alarm Action; Off: No recording during this time block.; To Set Schedule using Mouse:
  • Page 92 – : highlight the “Alarm Action: menu choice and press; Enter alarm selection mode; : Use the Jog wheel to switch to Alarm selection mode. The; Selecting alarm; : Use the Shuttle wheel to select an alarm number to be configured.
  • Page 93 – : Press the Enter button, the first time bar will be; Editing blocks in a time bar; : Press the Enter button to select that time bar for
  • Page 95 – Network Settings; LAN; DHCP
  • Page 96 – This field shows the secondary DNS server for your network.
  • Page 97 – The default port for the DVR is: 80; remote access
  • Page 98 – Email
  • Page 99 – DDNS
  • Page 100 – DNS Server 1; EverfocusDDNS
  • Page 101 – Alarm Server; should match the protocol set up for the CMS alarm server.
  • Page 102 – MJPEG; codec to enable the mobile phone access function.; Network Testing; Ping
  • Page 103 – Disk
  • Page 104 – Sets the maximum percentage of the HDD space reserved for Locked; Auto Lock; item in
  • Page 105 – RAID
  • Page 107 – Display Setting; Monitor OSD; on the live view image.
  • Page 109 – System Setting; NTP Update Interval:
  • Page 110 – Daylight Saving Time
  • Page 111 – User; Delete
  • Page 115 – Shows the current firmware version of the DVR.; Configurations; Network IP Settings, and Time settings will not be affected.; Allowed Remote Reboot:; Check the box to enable restarting the DVR via the Network.
  • Page 116 – Quick Archive; button, a beep will sound and the Quick
  • Page 117 – Information; configuration can be done in this menu.; System; Displays the firmware version.; Network; The ID number for EverFocus’ CMS as set up in the Alarm Server menu.
  • Page 118 – Status; Log
  • Page 119 – Remote Access to the DVR; Accessing the DVR on the Network; Internet connection:; , while the password is; OK; to log in to the Web Interface of the DVR.
  • Page 120 – Browser; Installing; Enabling
  • Page 122 – Now you will be able to see the remote live page.
  • Page 123 – Enabling ActiveX Controls; At the top of the Internet Explorer Window, click on; Tools; and then select; Internet; Click the; Security; tab at the top of the window and then click; Custom Level...
  • Page 126 – Remote Live V iew
  • Page 127 – Menu Bar; Click to display the live view window.
  • Page 128 – Remote Playback; To playback the recordings remotely, click the; button on the Menu Bar. Click; and then set up the settings. For more details about Search
  • Page 129 – Specifications
  • Page 131 – Troubleshooting; The DVR will not go into record mode.; Check that the monitor cables are good and power is on.; There is no display coming from one of the channels on the DVR.; Check that you can connect to the DVR on the LAN.
  • Page 132 – Appendix A: Network Overview; Introduction to TCP / IP; Appendix
  • Page 133 – port number
  • Page 136 – Typical Linksys Port Forwarding; DO NOT; support this product; admin; button to continue.; Save Settings; button to; Cancel Changes; to cancel your changes.
  • Page 138 – Typical D-Link Port Forwarding
  • Page 140 – Appendix C: T iming of Alarm Modes; Transparent Mode; Timeout + Transparent Mode; : Alarm duration for timeout, defined in the event setup menus
  • Page 141 – Timeout Mode; Permanent Mode
  • Page 142 – Timeout Mode: Retrigger of Alarms; Timeout+Transparent Mode: Retrigger of Alarms
  • Page 145 – Appendix E: IR Remote Control
  • Page 146 – EverFocus Electronics Corp.
Loading the manual

EPHD04+ HDcctv DVR

Slimline, 4CH, 1080p, Real Time

User’s Manual






Copyright © EverFocus Electronics Corp,

Release Date: November, 2012




"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - E V E R F O C U S E L E C T R O N I C S C O R P O R A T I O N; User’s Manual

E V E R F O C U S E L E C T R O N I C S C O R P O R A T I O N EPHD04H+ HDcctv DVR User’s Manual  2012 EverFocus Electronics Corp www.everfocus.com All rights reserved. No part of the contents of this manual may be reproduced or transmitted in any form or by any means without written permission of t...

Page 3 - ii; Safety Precautions; Do not block the ventilation openings or slots on the cover.; Read Instructions

ii Safety Precautions  Refer all work related to the installation of this product to qualified service personnel or system installers.  Do not block the ventilation openings or slots on the cover.  Do not drop metallic parts through slots. This could permanently damage the appliance. Turn the pow...

Page 5 - iv; Federal Communication Commission Interference Statement; WEEE

iv This Product is RoHS compliant. Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful...

Other EverFocus Models

All EverFocus Other