EverFocus EQ610 - Manuals - manualsarea.com

Page 2 - TABLE OF CONTENTS; NAMES AND FUNCTIONS OF PARTS; CAMERA SETUP OPERATIONS

- 1 - TABLE OF CONTENTS 1. PRODUCT OVERVIEW ............................................................................................................... 3 1.1 Main Features ...............................................................................................................................

Page 4 - Color without compromise:; or; Package Contents

- 3 - 1. PRODUCT OVERVIEW Amazing color low light sensitivity of .05 lux before the added benefits of digital signal processing technology, delivered by a 1/3” Sony Super HAD II sensor, is just the beginning with the new EverFocus EQ610. Color without compromise: 560TVL resolution, your choice of fu...

Page 6 - The light sensor is for

- 5 - 2. NAMES AND FUNCTIONS OF PARTS 2.1 Front panel The light sensor is for optional control of D/N switching levels in some applications. See section 5.6 for details. 2.2 Top/Bottom Mounting Using the two phillips head screws provided, the mounting bracket may be mounted to the top of the camera ...

Page 7 - connections

- 6 - ○ 2 ○ 3 ○ 5 ○ 6 ○ 7 ○ 8 ○ 9 ○ 10 ○ 11 ○ 4 ○ 11 ○ 9 ○ 2 ○ 3 ○ 5 ○ 6 ○ 7 ○ 4 ○ 12 ○ 10 ○ 8 ○ 2 ○ 3 ○ 5 ○ 6 ○ 7 ○ 8 ○ 9 ○ 10 ○ 11 ○ 4 ○ 10 ○ 10 2.3 Back panel and connections ○ 1 ○ 1 12VDC only 100~240VAC ○ 1 24VAC/12VDC

Page 8 - Terminal Block; If

- 7 - GN D D/N O u t D/N In Mot ion RS4 85- R S 485+ ○ 1 Terminal Block Terminal block connections: Connect wires to the terminal block by: strip the insulation back ½” from the end of the wire; press in on the upper tab above the lower wire opening; while holding the tab in, insert the wire; releas...

Page 11 - CONNECTION; The EQ610 is programmed using Pelco D type protocol

- 10 - 4. RS-485 CONNECTION 1. Connect the cable from keyboard or DVR RS485 port to the camera’s RS485 port. 2. Connect the cable from video output BNC of the camera to a monitor or DVR input BNC. 3. The RS485 ID set in the OSD Menu on the camera has to be the same as CAM ID used by the keyboard or ...

Page 17 - Select the shutter mode by pressing the LEFT or RIGHT button.; Note: AGC must be on for sense-up low light boost to function.; When selecting a

- 16 - 5.3 LENS 1. When the SETUP menu is displayed on the screen, please direct the arrow to point to “LENS” by using the UP and DOWN buttons. 2. Please select the type of the lens used (Manual/DC type) by pressing the LEFT or RIGHT button. 3. Please select RETURN and press the SETUP button if you ...

Page 20 - Return; switching function

- 19 - 5.4.8 Return Press “RET” to save all settings in the Exposure menu and return to the previous menu. Press “END” to save all the menu settings and exit. 5.5 WHITE BALANCE CONTROL The screen color can be adjusted by using the WHITE BALANCE function. 1. Please direct the arrow to point to “WHITE...

Page 22 - save all the setting menus and exit.

- 21 - 5.8.2 D-EFFECT 5.8.2.1 FREEZE (Note that practical application of this feature requires direct access to the camera menu in real time). -OFF: Select “OFF” to view moving pictures. -ON: Select “ON” to view still pictures. 5.8.2.2 MIRROR -OFF: Disable the effects. -MIRROR: Sets a horizontal ima...

Page 23 - Choose “END”; save all the menu settings and exit.

Page 26 - EverFocus Electronics Corp.

- 25 - EverFocus Electronics Corp. Headquarter s Office 12F, No.79 Sec.1 Shin-Tai Wu Road, Hsi-Chi, Taipei, Taiwan Tel: +886-2-26982334 Fax: +886-2-26982380 Beijing office Room 609,Technology Trade Building. Shangdi Information Industry Base, Haidian District,Beijing China Tel: +86-10-62971096 Fax: ...