EverFocus EPTZ900 - Manual

EverFocus EPTZ900

EverFocus EPTZ900 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
23 Page 23
24 Page 24
25 Page 25
26 Page 26
27 Page 27
28 Page 28
29 Page 29
30 Page 30
31 Page 31
32 Page 32
33 Page 33
34 Page 34
35 Page 35
36 Page 36
37 Page 37
38 Page 38
39 Page 39
40 Page 40
41 Page 41
42 Page 42
Page: / 42

Table of Contents:

  • Page 2 – Table of Contents
  • Page 9 – short to be connected to a wrong connector when putting them back.; RELAY
  • Page 10 – CPU
  • Page 12 – speed dome via the keyboard.
  • Page 13 – Power Cable
  • Page 14 – Video Cable; may be needed if the video cable is too long.; Control Cable; as a keyboard or a DVR.
  • Page 19 – bits of the SW2 on the PCB board are used to set the video format. The; PAL; enable a new value after changing.; OFF
  • Page 20 – Control Unit; Ternimator; the terminator resistance ON.
  • Page 22 – M5 Bolt; Hex Allen wrench; baseboard in the housing by screwing 4 bolts on it.
  • Page 23 – GLOVE
  • Page 24 – installing the bulb.
  • Page 25 – Cut the ceiling
  • Page 27 – Connection wire
  • Page 29 – Option
  • Page 34 – Two point auto pan; Press Shift + A.Pan to enter the 360° auto pan. The camera will; Focus on a preset position:; Press the number key, and then press Position to
  • Page 42 – EverFocus Electronics Corp.; 801 Highland Ave. Unit A
Loading the manual

Speed Dome

EPTZ900/500

USER MANUAL

Date: June 2006

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Table of Contents

1-1 Table of Contents 1.   EPTZ900/500 OVERVIEW ................................................ 1-3   1.1.   Introduction .............................................................................................1-3   1.2.   Specifications ...........................................................

Page 9 - short to be connected to a wrong connector when putting them back.; RELAY

1-8 1.3.2. Base Board The base board that is on the bottom of the housing connects to power cable, video cable, control cable, alarm cable, fan and heater (fan and heater are for EPTZ900 only). In order to connect to cables, the board needs to be taken off, and put back after finishing connecting to...

Page 10 - CPU

1-9 RELAY JP5 V ide o + V ide o - R S 48 5 + R S 48 5 - AC 2 4 AC 2 4 EPTZ500 Baseboard 1.3.3. EPTZ900/500 Control Board The PCB board with two dipswitches is the control board of speed dome. The two switches are used to set address, protocol, Baud Rate, video format and terminator resistance. SW1 O...

Other EverFocus Models

All EverFocus Other