EverFocus EKB500 - Manual

Table of Contents:

• Page 2 – Table of Contents
• Page 5 – EKB500 KEYBOARD CONNECTION DIAGRAM; Please check accessories in the packing before the installation.
• Page 8 – DVR reserved keys; DVR reserved keys are for DVRs control mainly. You can operate a; DVR that is compatible with EKB500.; These keys are for Speed Dome control mainly.
• Page 9 – Keyboard; Fig. 1 Fig. 2; press Esc to return to previous setting list.
• Page 10 – The structure of setup menu shows below:
• Page 11 – main setup menu. Key in the port you; Switch Joystick up/down to change the; After finishing setting, you need to press; Enter to save the setting.; rate to a COM port. For example: If you have 3 devices on Port 1 of the
• Page 12 – Video Connected to
• Page 15 – camera is connected.; Switch Joystick up/down to change the cameras.; can also delete a monitor from the list.; view monitor list, or press Esc to quit.; monitor is connected.
• Page 21 – The message shows up after pressing
• Page 22 – the key name will display accordingly to the LCD.
• Page 24 – KEYBOARD FUNCTIONS; EKB500 can support DVRs, and control DVRs via DVR reserved keys.; To get controlled over a DVR:; There are 2 ways to get controlled over a DVR.; Enter the DVR name, and then press DVR to get controlled over a DVR.
• Page 26 – To show camera on different monitor:
• Page 27 – Function
• Page 29 – DEVICE CONTROL OPERATION GUIDE
• Page 32 – Up/Down to change the alphanumeric characteristic. The available; Delete a preset position: Press Clr + Position to delete a preset
• Page 33 – preset positions 1, 2 and 3. The camera runs 1
• Page 37 – channel number + Enter to display in a full screen.; sequence for a call/matrix monitor is set up here as well.
• Page 38 – EverFocus Electronics Corp.