EverFocus EKB500 - Manuals

EverFocus EKB500 – Manual in PDF format online.

Manuals:

Manual

Manual EverFocus EKB500

Summary

Page 2 - Table of Contents

2 Table of Contents 1. INTRODUCTION ..................................................................................4 2. INSTALLATION .....................................................................................5 2.1. EKB500 KEYBOARD CONNECTION DIAGRAM .......................... 5 2.2. PAC...

Page 5 - EKB500 KEYBOARD CONNECTION DIAGRAM; Please check accessories in the packing before the installation.

5 2. INSTALLATION 2.1. EKB500 KEYBOARD CONNECTION DIAGRAM 2.2. PACKING LIST Please check accessories in the packing before the installation. 1) EKB500 Multi-function controller keyboard X1 2) User ’s manual in CD-ROM format/Hard Copy X1 3) Wiring Box for RS-485 connection X1 4) External Power adapte...

Page 8 - DVR reserved keys; DVR reserved keys are for DVRs control mainly. You can operate a; DVR that is compatible with EKB500.; These keys are for Speed Dome control mainly.

8 5. DVR reserved keys DVR reserved keys are for DVRs control mainly. You can operate a DVR that is compatible with EKB500. 6. Speed Dome reserved keys These keys are for Speed Dome control mainly. 7. Number keys Numbers from 0~9, one Clr (clear) key and one Enter (enter) key.

Page 9 - Keyboard; Fig. 1 Fig. 2; press Esc to return to previous setting list.

9 Keyboard Version 1.13 4. SETTING After Keyboard powered on, firmware version will be displayed on the panel, and the message will disappear after 3 seconds (Fig.1). After the version display disappears, a display with 3 main categories that are CAM (Camera), MON (Monitor) and DVR (Digital Video Re...

Page 10 - The structure of setup menu shows below:

10 COM Port Setting Device Setting The structure of setup menu shows below: Camera SettingMonitor SettingDVR SettingCamera List & DeleteMonitor List & DeleteDVR List & DeleteNon-listed Device Sub Keyboard SettingMENU PasswordLock PasswordAlarm PasswordBuzzer ON/OFFJoystick CalibrationKey...

Page 11 - main setup menu. Key in the port you; Switch Joystick up/down to change the; After finishing setting, you need to press; Enter to save the setting.; rate to a COM port. For example: If you have 3 devices on Port 1 of the

11 Port : _ ( 1 or 2 ) Input the port. BAUD : 9600 < [ ] to change Protocol : EVF-1 [ ] to change Port : 1 Changed [ ENT ] to save 4.1. COM PORT SETTING Select “COM Port Setting” (The line is flashing), and press Enter to enter the COM Port Setting, or Esc to go back main setup menu. Key in the p...

Page 12 - Video Connected to

12 Camera Name : _ _ _ _ RS485 Connected to Port : _ [ 1 or 2 ] RS485 Address: _ _ _ _ Video Connected to DVR : _ _ _ _ CH : _ _ Camera : 0001 changed [ ENT ] to save keyboard, all devices should be set with the same protocols and Baud Rate. 4.2. DEVICE SETTING 4.2.1. Camera Setting Assign a name fr...

Page 15 - camera is connected.; Switch Joystick up/down to change the cameras.; can also delete a monitor from the list.; view monitor list, or press Esc to quit.; monitor is connected.

15 Total 005 Monitors [ ENT ] to view list Name DVR CH 0012 0014 0002 < Del Camera0000 [ ENT ] to confirm. number. DVR: The DVR to which the camera is connected. CH: The channel number to which the camera is connected. Switch Joystick up/down to change the cameras. Press Enter for a camera you wa...

Page 21 - The message shows up after pressing

21 Release Joystick and press [ ENT ] Move joystick to corners. X+000 Y+000 Z+000 X-000 Y- OK Z-000 Alarm password set but disabled. Buzzer Enabled [ to toggle Buzzer Disabled [ to toggle 4.3.5. Buzzer ON/OFF Buzzer can be enabled or disabled by setting here. Switch Joystick to change the buzzer sta...

Page 22 - the key name will display accordingly to the LCD.

22 [ _ _ _ _ _ _ _ _ _ _ ] Pressed [ Esc ] to exit Shuttle : >>>> 5 Jog : 9934 directions. We divide each direction into 16 scales. A direction will show OK if the Joystick can reach the 16 th scale. Sway the Joystick up/down to check the X+/X- calibration. Sway the Joystick right/left t...

Page 24 - KEYBOARD FUNCTIONS; EKB500 can support DVRs, and control DVRs via DVR reserved keys.; To get controlled over a DVR:; There are 2 ways to get controlled over a DVR.; Enter the DVR name, and then press DVR to get controlled over a DVR.

24 DVR : 0001 [ CAM / MON / DVR ] 5. KEYBOARD FUNCTIONS There are three main functions that are in support of DVR, monitor and camera of the keyboard. 5.1. DVR support EKB500 can support DVRs, and control DVRs via DVR reserved keys. Keyboard functions if the DVR has the according function. For insta...

Page 26 - To show camera on different monitor:

26 CAM : 0001 MON : 0001 [ CAM / MON / DVR ] 5.2. Monitor support To add a monitor and a DVR into the keyboard devices before operating is necessary. Please check monitor setting on page 13 to get more monitor setting information. To show camera on different monitor: In order to do this, the camera ...

Page 27 - Function

27 CAM : 0001 MON : 0001 [ CAM / MON / DVR ] To add a speed dome into the keyboard device is necessary. Please check camera setting on page 12 to get more information. To get controlled over a camera (speed dome): There are 2 ways to get controlled over a speed dome camera. 1. Press the CAM key, and...

Page 29 - DEVICE CONTROL OPERATION GUIDE

29 6. DEVICE CONTROL OPERATION GUIDE The device connection depends on the users’ application. Users can check the device’s manual to set up and operate the keyboard. Two examples here provide you the guide of basic functions to operate. 6.1. To operate a speed dome (EPTZ1000) In order to operate a s...

Page 32 - Up/Down to change the alphanumeric characteristic. The available; Delete a preset position: Press Clr + Position to delete a preset

32 Shift the joystick Right/Left to change bits, and shift the Joystick Up/Down to change the alphanumeric characteristic. The available alphanumeric characteristics are 0~9, A~Z, &, ?, !, :, ‘, ., ,, /, -, and a space. Delete a preset position: Press Clr + Position to delete a preset position. ...

Page 33 - preset positions 1, 2 and 3. The camera runs 1

33 the tour after pressing Enter. To preset a tour before running it is necessary. Preset a one-way tour: Press Set + Tour to preset an one-way tour. The system will ask you to enter preset position numbers (The positions need to be preset). After finish entering all positions, press Stop to quit, a...

Page 37 - channel number + Enter to display in a full screen.; sequence for a call/matrix monitor is set up here as well.

37 6.2.5. Monitor views / operation Main monitor: In the main monitor, press Mode to switch the different multi-screen mode, press Display to switch the OSD displays, or press channel number + Enter to display in a full screen. Call / Matrix monitor: Press Call to set up the call/matrix monitor. The...

Page 38 - EverFocus Electronics Corp.

38 PN: MKB3G00100 EverFocus Electronics Corp. Head Office: 12F, No.79 Sec. 1 Shin-Tai Wu Road, Hsi-Chih, Taipei, Taiwan TEL: +886-2-26982334 FAX: +886-2-26982380 www.ev erfocus.com.tw USA Office: 1801 Highland Ave. Unit A Duarte, CA 91010, U.S.A. TEL: +1-626-844-8888 FAX: +1-626-844-8838 www.ev erfo...